Merge tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases f

Merge tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.

It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.

Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.

We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.

The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...

Core & protocols:

- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET

- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)

- Support buffers larger than PAGE_SIZE in devmem zero-copy API

- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned

- Report the per-group user count via RTM_GETMULTICAST

- Expose the route deletion reason in RTM_DELROUTE

- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot

- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table

- Support PRP RedBox (interlink) creation

- Support per-nexthop UDP dst port in VXLAN

- Continue converting getsockopt callbacks in a number of protocols
to iov_iter

Ethernet:

- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)

- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers

- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers

- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation

- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S

- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D

Wireless:

- nl80211: per-link statistics support for multi-link operation

- mac80211: AQL/airtime-fairness support for multicast

- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)

- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)

- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support

Bluetooth:

- HCI: add support for Shorter Connection Interval (SCI) feature

- af_bluetooth: add minimal context analysis annotations

- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq

Misc:

- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)

- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)

- Power-over-Ethernet: support Realtek PSE controllers

- Remove the IBM EHEA driver

- Remove tulip/xircom_cb driver"

* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...

show more ...

Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
Introduce iXD driver

Larysa Zaremba says:

This patch series adds the

Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
Introduce iXD driver

Larysa Zaremba says:

This patch series adds the iXD driver, which supports the Intel(R)
Control Plane PCI Function on Intel E2100 and later IPUs and FNICs.
It facilitates a centralized control over multiple IDPF PFs/VFs/SFs
exposed by the same card. The reason for the separation is to be able
to offload the control plane to the host different from where the data
plane is running.

This is the first phase in the release of this driver where we implement the
initialization of the core PCI driver. Subsequent phases will implement
advanced features like usage of idpf ethernet aux device, link management,
NVM update via devlink, switchdev port representors, data and exception path,
flow rule programming, etc.

The first phase entails the following aspects:

1. Additional libie functionalities:
Patches 1-5 introduce additional common library API for drivers to
communicate with the control plane through mailbox communication.
A control queue is a hardware interface which is used by the driver
to interact with other subsystems (like firmware). The library APIs
allow the driver to setup and configure the control queues to send and
receive virtchnl messages. The library has an internal bookkeeping
(XN API) mechanism to keep track of the send messages. It supports both
synchronous as well as asynchronous way of handling the messages. The
library also handles the timeout internally for synchronous messages
using events. This reduces the driver's overhead in handling the timeout
error cases.

The current patch series supports only APIs that are needed for device
initialization. These include APIs in the libie_pci module:
* Allocating/freeing the DMA memory and mapping the MMIO regions for
BAR0, read/write APIs for drivers to access the MMIO memory

and libie_cp module:
* Control queue initialization and configuration
* Transport initialization for bookkeeping
* Blocking and asynchronous mailbox transactions

Once the mailbox is initialized, the drivers can send and receive virtchnl
messages to/from the control plane.

The modules above are not supposed to be linked with the main libie library,
but do share the folder with it.

2. idpf:
Patches 6-11 refactor the idpf driver to use the libie APIs for control
queue configuration, virtchnl transaction, device initialization
and reset and adjust related code accordingly.

3. ixd:
Patches 12-15 add the ixd driver and implement multiple pieces of the
initialization flow as follows:
* Add the ability to load
* A reset is issued to ensure a clean device state, followed by
initialization of the mailbox
* Device capabilities:
As part of initialization, the driver has to determine what the device is
capable of (ex. max queues, vports, etc). This information is obtained from
the firmware and stored by the driver.
* Enable initial support for the devlink interface

* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixd: add devlink support
ixd: add the core initialization
ixd: add reset checks and initialize the mailbox
ixd: add basic driver framework for Intel(R) Control Plane Function
idpf: print a debug message and bail in case of non-event ctlq message
idpf: make mbx_task queueing and cancelling more consistent
idpf: refactor idpf to use libie control queues
idpf: refactor idpf to use libie_pci APIs
idpf: remove unused code for getting RSS info from device
idpf: remove 'vport_params_reqd' field
libie: add bookkeeping support for control queue messages
libie: add control queue support
libeth: allow to create fill queues without NAPI
libie: add PCI device initialization helpers to libie
virtchnl: move virtchnl and virtchnl2 headers to 'include/linux/net/intel'
====================

Link: https://patch.msgid.link/20260812212532.905873-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

libie: add bookkeeping support for control queue messages

Small send control queue message buffers are managed and reused by
libie itself, bigger send buffers are consumed. All are tracked with
the

libie: add bookkeeping support for control queue messages

Small send control queue message buffers are managed and reused by
libie itself, bigger send buffers are consumed. All are tracked with
the unique transaction (Xn) ids until they receive response or time out.

Responses can be received out of order, therefore transactions are stored
in an array and tracked though a bitmap. Rx buffers utilize page_pool.

Pre-allocated DMA memory is used where possible. It reduces the driver
overhead in handling memory allocation/free and message timeouts.

Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Phani R Burra <phani.r.burra@intel.com>
Co-developed-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Victor Raj <victor.raj@intel.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Co-developed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

show more ...

libie: add control queue support

Libie will now support control queue setup and configuration APIs. These
are mainly used for mailbox communication between drivers and control
plane.

Make use of th

libie: add control queue support

Libie will now support control queue setup and configuration APIs. These
are mainly used for mailbox communication between drivers and control
plane.

Make use of the libeth_rx page pool support for managing controlq buffers.

Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Phani R Burra <phani.r.burra@intel.com>
Co-developed-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Victor Raj <victor.raj@intel.com>
Co-developed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Co-developed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

show more ...