Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Wrap datapath globals into net_align

Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Wrap datapath globals into net_aligned_data, to avoid false sharing

- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

- Add SO_INQ and SCM_INQ support to AF_UNIX

- Add SIOCINQ support to AF_VSOCK

- Add TCP_MAXSEG sockopt to MPTCP

- Add IPv6 force_forwarding sysctl to enable forwarding per interface

- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB

- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users

- Convert TCP send queue handling from tasklet to BH workque

- Improve BPF iteration over TCP sockets to see each socket exactly
once

- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization

- Allow multicast routing to take effect on locally-generated packets

- Add output interface argument for End.X in segment routing

- MCTP: add support for gateway routing, improve bind() handling

- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed

- Support NUD_PERMANENT for proxy neighbor entries

- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests

- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup

- Support inspecting ref_tracker state via DebugFS

- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links

- Allow providing upcall pid for the 'execute' command in openvswitch

- Remove DCCP support from Netfilter's conntrack

- Disallow multiple packet duplications in the queuing layer

- Prevent use of deprecated iptables code on PREEMPT_RT

Driver API:

- Support RSS and hashing configuration over ethtool Netlink

- Add dedicated ethtool callbacks for getting and setting hashing
fields

- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc

- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs

- Support traffic classes in devlink rate API for bandwidth
management

- Remove rtnl_lock dependency from UDP tunnel port configuration

Device drivers:

- Add a new Broadcom driver for 800G Ethernet (bnge)

- Add a standalone driver for Microchip ZL3073x DPLL

- Remove IBM's NETIUCV device driver

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)

- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping

- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583

- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x

- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info

- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling

- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device

- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS

- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...

show more ...

Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2025-07-03

Vladimir Oltean converts Int

Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2025-07-03

Vladimir Oltean converts Intel drivers (ice, igc, igb, ixgbe, i40e) to
utilize new timestamping API (ndo_hwtstamp_get() and ndo_hwtstamp_set()).

For ixgbe:
Paul, Don, Slawomir, and Radoslaw add Malicious Driver Detection (MDD)
support for X550 and E610 devices to detect, report, and handle
potentially malicious VFs.

Simon Horman corrects spelling mistakes.

For igbvf:
Kohei Enju removes a couple of unreported counters and adds reporting
of Tx timeouts.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igbvf: add tx_timeout_count to ethtool statistics
igbvf: remove unused interrupt counter fields from struct igbvf_adapter
ixgbe: spelling corrections
ixgbe: turn off MDD while modifying SRRCTL
ixgbe: add Tx hang detection unhandled MDD
ixgbe: check for MDD events
ixgbe: add MDD support
i40e: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
ixgbe: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
igb: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
igc: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
ice: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()
====================

Link: https://patch.msgid.link/20250703174242.3829277-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

ixgbe: add MDD support

Add malicious driver detection to ixgbe driver. The supported devices
are E610 and X550.

Handling MDD events is enabled while VFs are created and turned off
when they are dis

ixgbe: add MDD support

Add malicious driver detection to ixgbe driver. The supported devices
are E610 and X550.

Handling MDD events is enabled while VFs are created and turned off
when they are disabled. There is no runtime command to enable or
disable MDD independently.

MDD event is logged when malicious VF driver is detected. For example VF
can try to send incorrect Tx descriptor (TSO on, but length field not
correct). It can be reproduced by manipulating the driver, or using
driver with incorrect descriptor values.

Example log:
"Malicious event on VF 0 tx:128 rx:128"

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.

Merge tag 'v6.14-rc4' into next

Sync up with the mainline.

Merge tag 'v6.14-rc1' into perf-tools-next

To get the various fixes in the current master.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge drm/drm-next into drm-xe-next

Sync to fix conlicts between drm-xe-next and drm-intel-next.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge drm/drm-next into drm-misc-next

Bring rc1 to start the new release dev.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync with v6.14-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting

Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.

Core:

- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.

- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.

- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.

- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.

Netfilter:

- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.

- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.

- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.

Protocols:

- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core

- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.

- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.

- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.

- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.

- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).

- Support ipv4-mapped ipv6 address clients in smc-r v2.

- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.

- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.

Driver API:

- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.

- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.

- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.

- Consolidate DSA drivers Energy Efficiency Ethernet support.

- Add EEE management to phylink, making use of the phylib
implementation.

- Add phylib support for in-band capabilities negotiation.

- Simplify how phylib-enabled mac drivers expose the supported
interfaces.

Tests and tooling:

- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.

- Increase TCP selftest coverage importing several packetdrill
test-cases.

- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.

- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.

Drivers:

- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering

- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit

- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support

- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation

- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration

- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274

- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"

* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...

show more ...

Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
ixgbe, ixgbevf: Add support for Intel(R) E610 device

Piotr Kwapulinski

Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
ixgbe, ixgbevf: Add support for Intel(R) E610 device

Piotr Kwapulinski says:

Add initial support for Intel(R) E610 Series of network devices. The E610
is based on X550 but adds firmware managed link, enhanced security
capabilities and support for updated server manageability.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixgbevf: Add support for Intel(R) E610 device
PCI: Add PCI_VDEVICE_SUB helper macro
ixgbe: Enable link management in E610 device
ixgbe: Clean up the E610 link management related code
ixgbe: Add ixgbe_x540 multiple header inclusion protection
ixgbe: Add support for EEPROM dump in E610 device
ixgbe: Add support for NVM handling in E610 device
ixgbe: Add link management support for E610 device
ixgbe: Add support for E610 device capabilities detection
ixgbe: Add support for E610 FW Admin Command Interface
====================

Link: https://patch.msgid.link/20241220201521.3363985-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

ixgbe: Enable link management in E610 device

Add high level link management support for E610 device. Enable the
following features:
- driver load
- bring up network interface
- IP address assignment

ixgbe: Enable link management in E610 device

Add high level link management support for E610 device. Enable the
following features:
- driver load
- bring up network interface
- IP address assignment
- pass traffic
- show statistics (e.g. via ethtool)
- disable network interface
- driver unload

Co-developed-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Jan Glaza <jan.glaza@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

show more ...