Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting

Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.

Core:

- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.

- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.

- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.

- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.

Netfilter:

- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.

- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.

- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.

Protocols:

- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core

- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.

- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.

- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.

- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.

- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).

- Support ipv4-mapped ipv6 address clients in smc-r v2.

- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.

- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.

Driver API:

- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.

- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.

- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.

- Consolidate DSA drivers Energy Efficiency Ethernet support.

- Add EEE management to phylink, making use of the phylib
implementation.

- Add phylib support for in-band capabilities negotiation.

- Simplify how phylib-enabled mac drivers expose the supported
interfaces.

Tests and tooling:

- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.

- Increase TCP selftest coverage importing several packetdrill
test-cases.

- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.

- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.

Drivers:

- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering

- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit

- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support

- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation

- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration

- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274

- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"

* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...

show more ...

Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
ixgbe, ixgbevf: Add support for Intel(R) E610 device

Piotr Kwapulinski

Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
ixgbe, ixgbevf: Add support for Intel(R) E610 device

Piotr Kwapulinski says:

Add initial support for Intel(R) E610 Series of network devices. The E610
is based on X550 but adds firmware managed link, enhanced security
capabilities and support for updated server manageability.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixgbevf: Add support for Intel(R) E610 device
PCI: Add PCI_VDEVICE_SUB helper macro
ixgbe: Enable link management in E610 device
ixgbe: Clean up the E610 link management related code
ixgbe: Add ixgbe_x540 multiple header inclusion protection
ixgbe: Add support for EEPROM dump in E610 device
ixgbe: Add support for NVM handling in E610 device
ixgbe: Add link management support for E610 device
ixgbe: Add support for E610 device capabilities detection
ixgbe: Add support for E610 FW Admin Command Interface
====================

Link: https://patch.msgid.link/20241220201521.3363985-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

ixgbe: Add support for E610 FW Admin Command Interface

Add low level support for Admin Command Interface (ACI). ACI is the
Firmware interface used by a driver to communicate with E610 adapter. Add
t

ixgbe: Add support for E610 FW Admin Command Interface

Add low level support for Admin Command Interface (ACI). ACI is the
Firmware interface used by a driver to communicate with E610 adapter. Add
the following ACI features:
- data structures, macros, register definitions
- commands handling
- events handling

Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge branch 'bpf/for-next' into sched_ext-base

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem a

Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.

Core & protocols:

- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT

- Use flex array for netdevice priv area, ensure its cache alignment

- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful

- Support scheduling transmission of packets based on CLOCK_TAI

- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets

- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync

- Improve TCP compliance with RFC 9293 for simultaneous connect()

- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it

- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

- Introduce IPPROTO_SMC for selecting SMC when socket is created

- Allow UDP GSO transmit from devices with no checksum offload

- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding

- nf_tables: shrink memory consumption for transaction objects

Things we sprinkled into general kernel code:

- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]

- Add IRQ information in sysfs for auxiliary bus

- Introduce guard definition for local_lock

- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures

BPF:

- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered

- Add new kfuncs for a generic, open-coded bits iterator

- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head

- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules

- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs

- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter

- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs

Driver API:

- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose

- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits

- Track additional RSS contexts in the core, make sure configuration
changes don't break them

- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths

- Support updating firmware on SFP modules

Tests and tooling:

- mptcp: use net/lib.sh to manage netns

- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints

- openvswitch: make test self-contained (don't depend on OvS CLI
tools)

Drivers:

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters

- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration

- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations

- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver

- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status

- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)

- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...

show more ...

Merge branch 'intel-wired-lan-driver-updates-2024-06-03'

Jacob Keller says:

====================
Intel Wired LAN Driver Updates 2024-06-03

This series includes miscellaneous improvements for the i

Merge branch 'intel-wired-lan-driver-updates-2024-06-03'

Jacob Keller says:

====================
Intel Wired LAN Driver Updates 2024-06-03

This series includes miscellaneous improvements for the ice as well as a
cleanup to the Makefiles for all Intel net drivers.

Andy fixes all of the Intel net driver Makefiles to use the documented
'*-y' syntax for specifying object files to link into kernel driver
modules, rather than the '*-objs' syntax which works but is documented as
reserved for user-space host programs.

Jacob has a cleanup to refactor rounding logic in the ice driver into a
common roundup_u64 helper function.

Michal Schmidt replaces irq_set_affinity_hint() to use
irq_update_affinity_hint() which behaves better with user-applied affinity
settings.

v2: https://lore.kernel.org/r/20240605-next-2024-06-03-intel-next-batch-v2-0-39c23963fa78@intel.com
v1: https://lore.kernel.org/r/20240603-next-2024-06-03-intel-next-batch-v1-0-e0523b28f325@intel.com
====================

Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-0-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: intel: Use *-y instead of *-objs in Makefile

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that

net: intel: Use *-y instead of *-objs in Makefile

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v4.20' into for-linus

Sync with mainline to get linux/overflow.h among other things.

Merge tag 'v4.20' into next

Merge with mainline to bring in the new APIs.

Merge branches 'for-4.20/upstream-fixes', 'for-4.21/core', 'for-4.21/hid-asus', 'for-4.21/hid-core', 'for-4.21/hid-cougar', 'for-4.21/hidraw', 'for-4.21/highres-wheel' and 'for-4.21/ish' into for-lin

Merge branches 'for-4.20/upstream-fixes', 'for-4.21/core', 'for-4.21/hid-asus', 'for-4.21/hid-core', 'for-4.21/hid-cougar', 'for-4.21/hidraw', 'for-4.21/highres-wheel' and 'for-4.21/ish' into for-linus

show more ...

Merge tag 'v4.20-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.20-rc7

Sync with upstream (which now contains fbdev-v4.20 changes) to
prepare a b

Merge tag 'v4.20-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.20-rc7

Sync with upstream (which now contains fbdev-v4.20 changes) to
prepare a base for fbdev-v4.21 changes.

show more ...

Merge tag 'v4.20-rc5' into sched/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next-queued

Pull in v4.20-rc3 via drm-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge tag 'v4.20-rc2' into next-general

Sync to Linux 4.20-rc2 for downstream developers.

Merge tag 'v4.20-rc1' into omap-for-v4.21/dt-ti-sysc

Linux 4.20-rc1