Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Introduce a config option to tweak MAX_SKB_FRAGS. In

Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances

- Reduce compound page head access for zero-copy data transfers

- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible

- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance

- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking

- Add lockless accesses annotation to sk_err[_soft]

- Optimize again the skb struct layout

- Extends the skb drop reasons to make it usable by multiple
subsystems

- Better const qualifier awareness for socket casts

BPF:

- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses

- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward

- Add more precise memory usage reporting for all BPF map types

- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params

- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton

- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities

- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc

- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps

- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps

- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree

- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them

- Add ARM32 USDT support to libbpf

- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations

Protocols:

- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address

- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition

- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf

- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures

- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers

- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction

- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore

- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support

Netfilter:

- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged

- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support

- The iptables 32bit compat interface isn't compiled in by default
anymore

- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used

- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device

Driver API:

- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time

- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them

- Allow the page_pool to directly recycle the pages from safely
localized NAPI

- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization

- Add YNL support for user headers and struct attrs

- Add partial YNL specification for devlink

- Add partial YNL specification for ethtool

- Add tc-mqprio and tc-taprio support for preemptible traffic classes

- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device

- Add basic LED support for switch/phy

- Add NAPI documentation, stop relaying on external links

- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space

- Add transceiver support and improve the error messages for CAN-FD
controllers

New hardware / drivers:

- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY

- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset

- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997

- Can:
- STMicroelectronics bxcan stm32f429

Drivers:

- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP

- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame

- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates

- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E

- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware

- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets

- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)

- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility

- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"

* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...

show more ...

bnxt_en: Allow to set switchdev mode without existing VFs

Remove an inability of bnxt_en driver to set eswitch to switchdev
mode without existing VFs by:

1. Allow to set switchdev mode in bnxt_dl_e

bnxt_en: Allow to set switchdev mode without existing VFs

Remove an inability of bnxt_en driver to set eswitch to switchdev
mode without existing VFs by:

1. Allow to set switchdev mode in bnxt_dl_eswitch_mode_set() so
representors are created only when num_vfs > 0 otherwise just
set bp->eswitch_mode
2. Do not automatically change bp->eswitch_mode during
bnxt_vf_reps_create() and bnxt_vf_reps_destroy() calls so
the eswitch mode is managed only by an user by devlink.
Just set temporarily bp->eswitch_mode to legacy to avoid
re-opening of representors during destroy.
3. Create representors in bnxt_sriov_enable() if current eswitch
mode is switchdev one

Tested by this sequence:
1. Set PF interface up
2. Set PF's eswitch mode to switchdev
3. Created N VFs
4. Checked that N representors were created
5. Set eswitch mode to legacy
6. Checked that representors were deleted
7. Set eswitch mode back to switchdev
8. Checked that representors exist again for VFs
9. Deleted all VFs
10. Checked that all representors were deleted as well
11. Checked that current eswitch mode is still switchdev

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Link: https://lore.kernel.org/r/20230411120443.126055-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.15 merge window.

Merge tag 'v5.13' into next

Sync up with the mainline to get the latest parport API.

Merge tag 'v5.13-rc3' into asoc-5.13

Linux 5.13-rc3

Merge drm/drm-next into drm-intel-gt-next

Pulling in -rc2 fixes and TTM changes that next upcoming patches depend
on.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge tag 'v5.13-rc2' into spi-5.13

Linux 5.13-rc2

Merge branch 'fixes-rc1' into fixes

Merge drm/drm-next into drm-intel-next

Time to get back in sync...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v5.12 fixes. Requested for vmwgfx.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

Start this new release drm-misc-fixes branch

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- bpf:
- allow bpf programs calling kernel

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets

- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks

- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)

- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)

- ipv6: segment routing: add support for IPv4 decapsulation

- icmp: add support for RFC 8335 extended PROBE messages

- inet: use bigger hash table for IP ID generation

- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original

- tcp: reorder tcp_congestion_ops for better cache locality

- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow

- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic

- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO

- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls

- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.

- allow specifing ifindex when device is moved to another namespace

- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily

- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic

- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing

Device APIs:

- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs

- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)

- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)

- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)

- dsa: improve support for sandwiched LAGs with bridge and DSA

- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support

- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver

- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames

- phy: add support for Clause-45 PHY Loopback

- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)

New hardware/drivers:

- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.

- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches

- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

- ath11k: support for QCN9074 a 802.11ax device

- Bluetooth: Broadcom BCM4330 and BMC4334

- phy: Marvell 88X2222 transceiver support

- mdio: add BCM6368 MDIO mux bus controller

- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

- mana: driver for Microsoft Azure Network Adapter (MANA)

- Actions Semi Owl Ethernet MAC

- can: driver for ETAS ES58X CAN/USB interfaces

Pure driver changes:

- add XDP support to: enetc, igc, stmmac

- add AF_XDP support to: stmmac

- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary

- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting

- ice, iavf: support flow filters, UDP Segmentation Offload

- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic

- ionic:
- implement Rx page reuse
- support HW PTP time-stamping

- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.

- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment

- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping

- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.

- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)

- mt7601u: enable TDLS support

- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...

show more ...

Merge branch 'bnxt_en-error-recovery'

Michael Chan says:

====================
bnxt_en: Error recovery fixes.

This series adds some fixes and enhancements to the error recovery
logic. The health r

Merge branch 'bnxt_en-error-recovery'

Michael Chan says:

====================
bnxt_en: Error recovery fixes.

This series adds some fixes and enhancements to the error recovery
logic. The health register logic is improved and we also add missing
code to free and re-create VF representors in the firmware after
error recovery.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

bnxt_en: Free and allocate VF-Reps during error recovery.

During firmware recovery, VF-Rep configuration in the firmware is lost.
Fix it by freeing and (re)allocating VF-Reps in FW at relevant point

bnxt_en: Free and allocate VF-Reps during error recovery.

During firmware recovery, VF-Rep configuration in the firmware is lost.
Fix it by freeing and (re)allocating VF-Reps in FW at relevant points
during the error recovery process.

Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge tag 'v4.20' into for-linus

Sync with mainline to get linux/overflow.h among other things.

Merge tag 'v4.20' into next

Merge with mainline to bring in the new APIs.