Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases f

Merge tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.

It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.

Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.

We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.

The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...

Core & protocols:

- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET

- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)

- Support buffers larger than PAGE_SIZE in devmem zero-copy API

- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned

- Report the per-group user count via RTM_GETMULTICAST

- Expose the route deletion reason in RTM_DELROUTE

- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot

- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table

- Support PRP RedBox (interlink) creation

- Support per-nexthop UDP dst port in VXLAN

- Continue converting getsockopt callbacks in a number of protocols
to iov_iter

Ethernet:

- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)

- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers

- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers

- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation

- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S

- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D

Wireless:

- nl80211: per-link statistics support for multi-link operation

- mac80211: AQL/airtime-fairness support for multicast

- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)

- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)

- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support

Bluetooth:

- HCI: add support for Shorter Connection Interval (SCI) feature

- af_bluetooth: add minimal context analysis annotations

- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq

Misc:

- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)

- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)

- Power-over-Ethernet: support Realtek PSE controllers

- Remove the IBM EHEA driver

- Remove tulip/xircom_cb driver"

* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...

show more ...

Merge branch 'net-add-adin1140-support'

Ciprian Regus says:

====================
net: Add ADIN1140 support

This series introduces support for the ADIN1140 (also called AD3306)
10BASE-T1S single po

Merge branch 'net-add-adin1140-support'

Ciprian Regus says:

====================
net: Add ADIN1140 support

This series introduces support for the ADIN1140 (also called AD3306)
10BASE-T1S single port MACPHY. The device integrates the MAC and PHY in
the same package. The communication with the host CPU is done through an
SPI interface, using the Open Alliance TC6 protocol for control and data
transactions. As a result, the oa_tc6 framework is used to implement
the communication with the device (register accesses and Ethernet frame
RX/TX).

The MAC and PHY are connected internally using an MII and MDIO bus.

The PHY is a half duplex 10Mbps device, which implements both the PLCA
RS (IEEE 802.3 clause 148) and CSMA/CD methods of accessing the Ethernet
medium. The 10BASE-T1S standard allows multiple PHY devices to be
connected (in parallel) on the same single twisted pair network segment,
so PLCA can be configured in order to provide a fair access scheme to
all the nodes and reduce the jitter introduced by the unordered CSMA/CD
transmits. The PHY's internal register map can be accessed using the
direct MDIO mode of the OA TC6. The control, status, phy id 1 & 2 C22
registers are mapped to the 0xFF00 - 0xFF03 range. As for C45
addressable devices, the PHY has PCS, PMA and PLCA blocks.

The oa_tc6 framework patches are changes that would make the library
usable by the subsequent ADIN1140 MAC driver.

The protected mode patch is required because the ADIN1140 only allows
protected mode OA TC6 control transactions, which the oa_tc6 framework
doesn't currently implement.

The OA_TC6_BROKEN_PHY quirk patch is required in order to allow the MAC
driver to have a custom implementation for the mii_bus access methods as a
workaround for hardware issues:

1. The OA TC6 standard defines the direct and indirect access modes for
MDIO transactions. The ADIN1140 incorrectly advertises indirect mode
only (supported capabilities register - 0x2, bit 9), while actually
implementing just the direct mode. We cannot rely on the CAP register
to choose an access method (which oa_tc6 does by default, even though
it only implements the direct mode), so the driver has to use its
own.
2. The ADIN1140 cannot access the C22 register space of the internal
PHY, while the PHY is busy receiving frames. If that happens, the
CONFIG0 and CONFIG2 registers of the MAC will get corrupted and the
data transfer will stop. Those two registers configure settings for
the transfer protocol between the MAC and host, so the value for some
of their subfields shouldn't be changed while the netdev is up.
Since we know the PHY is internal, the MAC driver can implement a
custom mii_bus, which can intercept C22 accesses. Most of the
registers mapped in the 0x0 - 0x3 range (the only ones the PHY offers)
are read only, and their value can be read from somewhere else (e.g
the PHYID 1 & 2 have the same value as 0x1 in the MAC memory map).
C45 accesses do not cause this issue, so we can properly implement
them.

Even though they have different driver, the MAC one cannot function
without the PHY driver, since the PHY is not compatible with the generic
c22 driver. As such CONFIG_ADIN1140 selects CONFIG_ADIN1140_PHY.

Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
====================

Link: https://patch.msgid.link/20260708-adin1140-driver-v5-0-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

net: ethernet: adi: Add a driver for the ADIN1140 MACPHY

Add a driver for ADIN1140. The device is a 10BASE-T1S MAC-PHY
(integrated in the same package) that connects to a CPU over an SPI bus,
and im

net: ethernet: adi: Add a driver for the ADIN1140 MACPHY

Add a driver for ADIN1140. The device is a 10BASE-T1S MAC-PHY
(integrated in the same package) that connects to a CPU over an SPI bus,
and implements the Open Alliance TC6 protocol for control and frame
transfers. As such, this driver relies on oa_tc6 for the communication
with the device. The device has an alternative name (AD3306), so the
driver can be probed using one of the two compatible strings.

For control transactions, ADIN1140 only implements the protected mode.
The driver has a custom implementation for the mii_bus access methods as a
workaround for hardware issues:

1. The OA TC6 standard defines the direct and indirect access modes for
MDIO transactions. The ADIN1140 incorrectly advertises indirect mode
only (supported capabilities register - 0x2, bit 9), while actually
implementing just the direct mode. We cannot rely on the CAP register
to choose an access method (which oa_tc6 does by default, even though
it only implements the direct mode), so the driver has to use its
own.
2. The ADIN1140 cannot access the C22 register space of the internal
PHY, while the PHY is busy receiving frames. If that happens, the
CONFIG0 and CONFIG2 registers of the MAC will get corrupted and the
data transfer will stop. Those two registers configure settings for
the transfer protocol between the MAC and host, so the value for some
of their subfields shouldn't be changed while the netdev is up.
Since we know the PHY is internal, the MAC driver can implement a
custom mii_bus, which can intercept C22 accesses. Most of the
registers mapped in the 0x0 - 0x3 range (the only ones the PHY offers)
are read only, and their value can be read from somewhere else (e.g
the PHYID 1 & 2 have the same value as 0x1 in the MAC memory map).
For the fields that are R/W (loopback and AN/reset) in the control
register, the PHY driver already implements the set_loopback() and
config_aneg() functions. The C22 write function of the driver is a
no-op and is used to protect against the ioctl MDIO access path.
C45 accesses do not cause this issue, so we can properly implement
them.

Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Link: https://patch.msgid.link/20260708-adin1140-driver-v5-13-4aca7b51a58b@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'master' into mm-stable

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <tho

Merge drm/drm-next into drm-xe-next

Backmerging drm-next in order to get up-to-date and in particular
to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configu

Merge tag 'phy_dp_modes_6.10' into msm-next-lumag

Merge DisplayPort subnode API in order to allow DisplayPort driver to
configure the PHYs either to the DP or eDP mode, depending on hardware
configuration.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catching up on 6.9-rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.9-rc2 changes into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync to get the drm_printer changes to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to sync before merging the patchset at [1].

[1] https://lore.kernel.org/all/cover.1709913674.git.jani.nikula@intel.com/

Signed-off-by: Thomas Zi

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to sync before merging the patchset at [1].

[1] https://lore.kernel.org/all/cover.1709913674.git.jani.nikula@intel.com/

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Merge tag 'asoc-fix-v6.9-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A bunch of fixes that came in during the merge window, pr

Merge tag 'asoc-fix-v6.9-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.9

A bunch of fixes that came in during the merge window, probably the most
substantial thing is the DPCM locking fix for compressed audio which has
been lurking for a while.

show more ...

spi: Merge up v6.8 release

An i.MX fix depends on other fixes that were sent to v6.8.

ASoC: Merge up release

In order to apply additional fixes that depend on the fixes merged for
v6.8 merge up the final release.

Merge 6.8-rc6 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge v6.8-rc6 into usb-next

We need it here for the USB fixes, and it resolves a merge conflict as
reported in linux-next in drivers/usb/roles/class.c

Reported-by: Stephen Rothwell <sfr@canb.auug.

Merge v6.8-rc6 into usb-next

We need it here for the USB fixes, and it resolves a merge conflict as
reported in linux-next in drivers/usb/roles/class.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'loongarch-kvm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.9

* Set reserved bits as zero in CPUCFG.
* Start SW t

Merge tag 'loongarch-kvm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.9

* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.

show more ...

Merge tag 'v6.8-rc7' into gpio/for-next

Linux 6.8-rc7

Merge tag 'drm-misc-next-2024-02-29' into msm-next

Merge to pick up commit 47f419e07111 ("drm/dp: move
intel_dp_vsc_sdp_pack() to generic helper")

drm-misc-next for v6.9:

UAPI Changes:

Cross-subs

Merge tag 'drm-misc-next-2024-02-29' into msm-next

Merge to pick up commit 47f419e07111 ("drm/dp: move
intel_dp_vsc_sdp_pack() to generic helper")

drm-misc-next for v6.9:

UAPI Changes:

Cross-subsystem Changes:

backlight:
- corgi: include backlight header

fbdev:
- Cleanup includes in public header file
- fbtft: Include backlight header

Core Changes:

edid:
- Remove built-in EDID data

dp:
- Avoid AUX transfers on powered-down displays
- Add VSC SDP helpers

modesetting:
- Add sanity checks for polling
- Cleanups

scheduler:
- Cleanups

tests:
- Add helpers for mode-setting tests

Driver Changes:

i915:
- Use shared VSC SDP helper

mgag200:
- Work around PCI write bursts

mxsfb:
- Use managed mode config

nouveau:
- Include backlight header where necessary

qiac:
- Cleanups

sun4:
- HDMI: updates to atomic mode setting

tegra:
- Fix GEM refounting in error paths

tidss:
- Fix multi display
- Fix initial Z position

v3d:
- Support display MMU page size

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next to prepare drm-misc-next-fixes for
the rest of the release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get drm-misc-next up to v6.8-rc6.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge v6.8-rc6 into drm-next

Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.

S

Merge v6.8-rc6 into drm-next

Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...