Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the 5.18 fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one

Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.

Core
----

- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.

- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).

- Continue the work of annotating packet drop reasons throughout the
stack.

- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.

- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.

- Extend the ref_tracker to allow catching use-after-free bugs.

BPF
---

- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.

- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.

- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.

- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.

- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.

- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).

- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.

- Allow cgroup BPF progs to return custom errors to user space.

- Add support for AF_UNIX iterator batching.

- Allow iterator programs to use sleepable helpers.

- Support JIT of add, and, or, xor and xchg atomic ops on arm64.

- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.

- Large number of libbpf API improvements, cleanups and deprecations.

Protocols
---------

- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.

- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.

- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.

- Support inserting IPv6 IOAM information to a fraction of frames.

- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)

- Support setting socket and IPv6 options via cmsg on ping6 sockets.

- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.

- Add support for locked bridge ports (for 802.1X).

- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.

- IPv6 extension header handling in Open vSwitch.

- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.

- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY

- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)

- Multi-BSSID beacon handling in AP mode for WiFi.

- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events

- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements

- Increase the max PDU size in CAN ISOTP to 64 kB.

Driver API
----------

- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.

- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.

- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.

- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.

- Allow configuring completion queue event size.

- Refactor page_pool to enable fragmenting after allocation.

- Add allocation and page reuse statistics to page_pool.

- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.

- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering

New hardware / drivers
----------------------

- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches

- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6

- Mobile:
- iosm: Intel M.2 7360 WWAN card

Drivers
-------

- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.

- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support

- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions

- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP

- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support

- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports

- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload

- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches

- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock

- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets

- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode

- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices

- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915

- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan

- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...

show more ...

Merge branch 'dsa-realtek-MDIO'

Luiz Angelo Daros de Luca says:

====================
net: dsa: realtek: MDIO interface and RTL8367S,RTL8367RB-VB

The old realtek-smi driver was linking subdrivers i

Merge branch 'dsa-realtek-MDIO'

Luiz Angelo Daros de Luca says:

====================
net: dsa: realtek: MDIO interface and RTL8367S,RTL8367RB-VB

The old realtek-smi driver was linking subdrivers into a single
realtek-smi.ko After this series, each subdriver will be an independent
module required by either realtek-smi (platform driver) or the new
realtek-mdio (mdio driver). Both interface drivers (SMI or MDIO) are
independent, and they might even work side-by-side, although it will be
difficult to find such device. The subdriver can be individually
selected but only at buildtime, saving some storage space for custom
embedded systems.

Existing realtek-smi devices continue to work untouched during the
tests. The realtek-smi was moved into a realtek subdirectory, but it
normally does not break things.

I couldn't identify a fixed relation between port numbers (0..9) and
external interfaces (0..2), and I'm not sure if it is fixed for each
chip version or a device configuration. Until there is more info about
it, there is a new port property "realtek,ext-int" that can inform the
external interface.

The rtl8365mb might now handle multiple CPU ports and extint ports not
used as CPU ports. RTL8367S has an SGMII external interface, but my test
device (TP-Link Archer C5v4) uses only the second RGMII interface. We
need a test device with more external ports to test these features.
The driver still cannot handle SGMII ports.

RTL8367RB-VB support was added using information from Frank Wunderlich
<frank-w@public-files.de> but I didn't test it myself.

The rtl8365mb was tested with a MDIO-connected RTL8367S (TP-Link Acher
C5v4) and a SMI-connected RTL8365MB-VC switch (Asus RT-AC88U)

The rtl8366rb subdriver was not tested with this patch series, but it
was only slightly touched. It would be nice to test it, especially in an
MDIO-connected switch.

Best,

Luiz

Changelog:

v1-v2)
- formatting fixes
- dropped the rtl8365mb->rtl8367c rename
- other suggestions

v2-v3)
* realtek-mdio.c:
- cleanup realtek-mdio.c (BUG_ON, comments and includes)
- check devm_regmap_init return code
- removed realtek,rtl8366s string from realtek-mdio
* realtek-smi.c:
- removed void* type cast
* rtl8365mb.c:
- using macros to identify EXT interfaces
- rename some extra extport->extint cases
- allow extint as non cpu (not tested)
- allow multple cpu ports (not tested)
- dropped cpu info from struct rtl8365mb
* dropped dt-bindings changes (dealing outside this series)
* formatting issues fixed

v3-v4)
* fix cover message numbering 0/13 -> 0/11
* use static for realtek_mdio_read_reg
- Reported-by: kernel test robot <lkp@intel.com>
* use dsa_switch_for_each_cpu_port
* mention realtek_smi_{variant,ops} to realtek_{variant,ops}
in commit message

v5) sent again v4 branch. Sorry

v4-v6)
- added support for RTL8367RB-VB
- cleanup mdio_{read,write}, removing misterious START_OP, checking and
returning errors
- renamed priv->phy_id to priv->mdio_addr
- duplicated priv->ds_ops into ds_ops_{smi,mdio}. ds_ops_smi must not
set
phy_read or else both dsa and this driver might free slave_mii.
Dropped
401fd75c92f37
- Map port to extint using code instead of device-tree property. Added
comment
about port number, port description and external interfaces. Dropped
'realtek,ext-int' device-tree property
- Redacted the non-cpu ext port commit message, not highlighting the
possibility of using multiple CPU ports as it was just a byproduct.
- In a possible case of multiple cpu ports, use the first one as the
trap port.
Dropped 'realtek,trap-port' device-tree property
- Some formatting fixes
- BUG: rtl8365mb_phy_mode_supported was still checking for a cpu port
and not
an external interface
- BUG: fix trapdoor masking for port>7. Got a compiler error with a
bigger
constant value
- WARN: completed kdoc for rtl8366rb_drop_untagged()
- WARN: removed marks from incomplete kdoc
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: realtek: add new mdio interface for drivers

This driver is a mdio_driver instead of a platform driver (like
realtek-smi).

ds_ops was duplicated for smi and mdio usage as mdio interfaces u

net: dsa: realtek: add new mdio interface for drivers

This driver is a mdio_driver instead of a platform driver (like
realtek-smi).

ds_ops was duplicated for smi and mdio usage as mdio interfaces uses
phy_{read,write} in ds_ops and the presence of phy_read is incompatible
with external slave_mii_bus allocation.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: realtek: convert subdrivers into modules

Preparing for multiple interfaces support, the drivers
must be independent of realtek-smi.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmai

net: dsa: realtek: convert subdrivers into modules

Preparing for multiple interfaces support, the drivers
must be independent of realtek-smi.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: realtek-smi: move to subdirectory

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.

net: dsa: realtek-smi: move to subdirectory

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...