net: dsa: realtek: rtl8365mb: add FDB support

Implement support for FDB and MDB management for the RTL8365MB series
switches.

The hardware supports IVL by keying the unicast forwarding database wit

net: dsa: realtek: rtl8365mb: add FDB support

Implement support for FDB and MDB management for the RTL8365MB series
switches.

The hardware supports IVL by keying the unicast forwarding database with
the {MAC, VID, EFID} tuple. The Extended Filtering ID (EFID) is 3 bits
wide, providing 8 unique filtering domains. This driver reserves EFID 0
for standalone ports, effectively limiting the hardware offload to a
maximum of 7 bridges. The multicast database uses a {MAC, VID} key, with
ports from different bridges sharing the same multicast group.

Introduce a mutex lock (l2_lock) to protect concurrent L2 table updates.

Add support for forwarding database operations, including unicast and
multicast entry handling as well as fast aging support.

Set DSA switch flags assisted_learning_on_cpu_port and fdb_isolation.

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Co-developed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-7-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: dsa: realtek: rtl8365mb: add VLAN support

Realtek RTL8365MB switches (a.k.a. RTL8367C family) use two different
structures for VLANs:

- VLAN4K: A full table with 4096 entries defining port mem

net: dsa: realtek: rtl8365mb: add VLAN support

Realtek RTL8365MB switches (a.k.a. RTL8367C family) use two different
structures for VLANs:

- VLAN4K: A full table with 4096 entries defining port membership and
tagging.
- VLANMC: A smaller table with 32 entries used primarily for PVID
assignment.

In this hardware, a port's PVID must point to an index in the VLANMC
table rather than a VID directly. Since the VLANMC table is limited to
32 entries, the driver implements a dynamic allocation scheme to
maximize resource usage:

- VLAN4K is treated by the driver as the source of truth for membership.
- A VLANMC entry is only allocated when a port is configured to use a
specific VID as its PVID.
- VLANMC entries are deleted when no longer needed as a PVID by any port.

Although VLANMC has a members field, the switch only checks membership
in the VLAN4K table. This driver will use VLANMC members field as way to
track which ports are using that entry as PVID.

VLANMC index 0, although a valid entry, is reserved in this driver as a
neutral PVID value for ports not using a specific PVID.

In the subsequent RTL8367D switch family, VLANMC table was
removed and PVID assignment was delegated to a dedicated set of
registers.

The use of FIELD_PREP for reconstructing LO/HI values was suggested by
Yury Norov.

Fix for vlan_setup and vlan_filtering was suggested by Abdulkader
Alrezej.

Suggested-by: Yury Norov <ynorov@nvidia.com>
Suggested-by: Abdulkader Alrezej <abdulkader.alrezej@gmail.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Co-developed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-6-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: dsa: realtek: rtl8365mb: add table lookup interface

Add a generic table lookup interface to centralize access to
the RTL8365MB internal tables.

This interface abstracts the low-level table acc

net: dsa: realtek: rtl8365mb: add table lookup interface

Add a generic table lookup interface to centralize access to
the RTL8365MB internal tables.

This interface abstracts the low-level table access logic and
will be used by subsequent commits to implement FDB and VLAN
operations.

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Co-developed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-5-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: dsa: realtek: rtl8365mb: prepare for multiple source files

Rename rtl8365mb.c to rtl8365mb_main.c in preparation for subsequent
commits which add additional source files to the driver.

The tra

net: dsa: realtek: rtl8365mb: prepare for multiple source files

Rename rtl8365mb.c to rtl8365mb_main.c in preparation for subsequent
commits which add additional source files to the driver.

The trailing backslash in the Makefile is deliberate. It allows for new
files to be added without clobbering git history.

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Co-developed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260606-realtek_forward-v13-4-b9e409687cbe@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: dsa: rtl8366rb: Fix compilation problem

When the kernel is compiled without LED framework support the
rtl8366rb fails to build like this:

rtl8366rb.o: in function `rtl8366rb_setup_led':
rtl836

net: dsa: rtl8366rb: Fix compilation problem

When the kernel is compiled without LED framework support the
rtl8366rb fails to build like this:

rtl8366rb.o: in function `rtl8366rb_setup_led':
rtl8366rb.c:953:(.text.unlikely.rtl8366rb_setup_led+0xe8):
undefined reference to `led_init_default_state_get'
rtl8366rb.c:980:(.text.unlikely.rtl8366rb_setup_led+0x240):
undefined reference to `devm_led_classdev_register_ext'

As this is constantly coming up in different randconfig builds,
bite the bullet and create a separate file for the offending
code, split out a header with all stuff needed both in the
core driver and the leds code.

Add a new bool Kconfig option for the LED compile target, such
that it depends on LEDS_CLASS=y || LEDS_CLASS=RTL8366RB
which make LED support always available when LEDS_CLASS is
compiled into the kernel and enforce that if the LEDS_CLASS
is a module, then the RTL8366RB driver needs to be a module
as well so that modprobe can resolve the dependencies.

Fixes: 32d617005475 ("net: dsa: realtek: add LED drivers for rtl8366rb")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502070525.xMUImayb-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: realtek: merge rtl83xx and interface modules into realtek_dsa

Since rtl83xx and realtek-{smi,mdio} are always loaded together,
we can optimize resource usage by consolidating them into a s

net: dsa: realtek: merge rtl83xx and interface modules into realtek_dsa

Since rtl83xx and realtek-{smi,mdio} are always loaded together,
we can optimize resource usage by consolidating them into a single
module.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: realtek: common rtl83xx module

Some code can be shared between both interface modules (MDIO and SMI)
and among variants. These interface functions migrated to a common
module:

- rtl83xx_l

net: dsa: realtek: common rtl83xx module

Some code can be shared between both interface modules (MDIO and SMI)
and among variants. These interface functions migrated to a common
module:

- rtl83xx_lock
- rtl83xx_unlock
- rtl83xx_probe
- rtl83xx_register_switch
- rtl83xx_unregister_switch
- rtl83xx_shutdown
- rtl83xx_remove

The reset during probe was moved to the end of the common probe. This way,
we avoid a reset if anything else fails.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: realtek: add new mdio interface for drivers

This driver is a mdio_driver instead of a platform driver (like
realtek-smi).

ds_ops was duplicated for smi and mdio usage as mdio interfaces u

net: dsa: realtek: add new mdio interface for drivers

This driver is a mdio_driver instead of a platform driver (like
realtek-smi).

ds_ops was duplicated for smi and mdio usage as mdio interfaces uses
phy_{read,write} in ds_ops and the presence of phy_read is incompatible
with external slave_mii_bus allocation.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: realtek: convert subdrivers into modules

Preparing for multiple interfaces support, the drivers
must be independent of realtek-smi.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmai

net: dsa: realtek: convert subdrivers into modules

Preparing for multiple interfaces support, the drivers
must be independent of realtek-smi.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: dsa: realtek-smi: move to subdirectory

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.

net: dsa: realtek-smi: move to subdirectory

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...