Merge tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The zero-copy changes are relatively significant, but regres

Merge tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The zero-copy changes are relatively significant, but regression risk
should be contained. The feature needs to be used to cause trouble.

Also it feels like we got an order of magnitude more semi-automated
"refactoring" chaff than usual, I wonder if it's just us.

Core & protocols:

- Support Device Memory TCP, ability to zero-copy receive TCP
payloads to a DMABUF region of memory while packet headers land
separately in normal kernel buffers, and TCP processes then as
usual.

- The ability to read the PTP PHC (Physical Hardware Clock) alongside
MONOTONIC_RAW timestamps with PTP_SYS_OFFSET_EXTENDED. Previously
only CLOCK_REALTIME was supported.

- Allow matching on all bits of IP DSCP for routing decisions.
Previously we only supported on matching TOS bits in IPv4 which is
a narrower interpretation of the same header field.

- Increase the range of weights used for multi-path routing from
8 bits to 16 bits.

- Add support for IPv6 PIO p flag in the Prefix Information Option
per draft-ietf-6man-pio-pflag.

- IPv6 IOAM6 support for new tunsrc encap mode for better
performance.

- Detect destinations which blackhole MPTCP traffic and avoid
initiating MPTCP connections to them for a certain period of time,
1h by default.

- Improve IPsec control path performance by removing the inexact
policies list.

- AF_VSOCK: add support for SIOCOUTQ ioctl.

- Add enum for reasons TCP reset was sent for easier tracing.

- Add SMC ringbufs usage statistics.

Drivers:

- Handle netconsole setup failures more gracefully, don't fail
loading, retain the specified target as disabled.

- Extend bonding's IPsec offload pass thru capabilities (ESN, stats).

Filtering:

- Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime.

- Support using BPF skb helpers in tracepoints.

- Conntrack Netlink: support CTA_FILTER for flush.

- Improve SCTP support in nfnetlink_queue.

- Improve performance of large nftables flush transactions.

Things we sprinkled into general kernel code:

- selftests: support setting an "interpreter" for script files; make
it easy to run as separate cases tests where one "interpreter" is
fed various test descriptions (in our case packet sequences).

Driver API:

- Extend core and ethtool APIs to support many PHYs connected to a
single interface (PHY topologies).

- Extend cable diagnostics to specify whether Time Domain
Reflectometry (TDR) or Active Link Cable Diagnostic (ALCD) was
used.

- Add library for implementing MAC-PHY Ethernet drivers for SPI
devices compatible with Open Alliance 10BASE-T1x MAC-PHY Serial
Interface (TC6) standard.

- Add helpers to the PHY framework, for PHYs following the Open
Alliance standards:
- 1000BaseT1 link settings
- cable test and diagnostics

- Support listing / dumping all allocated RSS contexts.

- Add configuration for frequency Embedded SYNC in DPLL, which
magically embeds sync pulses into Ethernet signaling.

Device drivers:

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- use better FW APIs for queue reset
- support QOS and TPID settings for the SR-IOV VLAN
- support dynamic MSI-X allocation
- Intel (100G, ice, idpf):
- ice: support PCIe subfunctions
- iavf: add support for TC U32 filters on VFs
- ice: support Embedded SYNC in DPLL
- nVidia/Mellanox (mlx5):
- support HW managed steering tables
- support PCIe PTM cross timestamping
- AMD/Pensando:
- ionic: use page_pool to increase Rx performance
- Cisco (enic):
- report per-queue statistics

- Ethernet virtual:
- Microsoft vNIC:
- mana: support configuring ring length
- netvsc: enable more channels on systems with many CPUs
- IBM veth:
- optimize polling to improve TCP_RR performance
- optimize performance of Tx handling
- VirtIO net:
- synchronize the operstate with the admin state to allow a
lower virtio-net to propagate the link status to an upper
device like macvlan

- Ethernet NICs consumer, and embedded:
- Add driver for Realtek automotive PCIe devices (RTL9054,
RTL9068, RTL9072, RTL9075, RTL9068, RTL9071)
- Add driver for Microchip LAN8650/1 10BASE-T1S MAC-PHY.
- Microchip:
- lan743x: use phylink - support WOL, EEE, pause, link settings
- add Wake-on-LAN support for KSZ87xx family
- add KSZ8895/KSZ8864 switch support
- factor out FDMA code and use it in sparx5 and lan966x
(including DCB support in both)
- Synopsys (stmmac):
- support frame preemption (configured using TC and ethtool)
- support Loongson DWMAC (GMAC v3.73)
- support RockChips RK3576 DWMAC
- TI:
- am65-cpsw: add multi queue RX support
- icssg-prueth: HSR offload support
- Cadence (macb):
- enable software (hrtimer based) IRQ coalescing by default
- Xilinx (axinet):
- expose HW statistics
- improve multicast filtering
- relax Rx checksum offload constraints
- MediaTek:
- mt7530: add EN7581 support
- Aspeed (ftgmac100):
- report link speed and duplex
- Intel:
- igc: add mqprio offload
- igc: report EEE configuration
- RealTek (r8169):
- add support for RTL8126A rev.b
- Vitesse (vsc73xx):
- implement FDB add/del/dump operations
- Freescale (fs_enet):
- use phylink

- Ethernet PHYs:
- vitesse: implement downshift and MDI-X in vsc73xx PHYs
- microchip: support LAN887x, supporting IEEE 802.3bw (100BASE-T1)
and IEEE 802.3bp (1000BASE-T1) specifications
- add Applied Micro QT2025 PHY driver (in Rust)
- add Motorcomm yt8821 2.5G Ethernet PHY driver

- CAN:
- add driver for Rockchip RK3568 CAN-FD controller
- flexcan: add wakeup support for imx95
- kvaser_usb: set hardware timestamp on transmitted packets

- WiFi:
- mac80211/cfg80211:
- EHT rate support in AQL airtime fairness
- handle DFS (radar detection) per link in Multi-Link Operation
- RealTek (rtw89):
- support RTL8852BT and 8852BE-VT (WiFi 6)
- support hardware rfkill
- support HW encryption in unicast management frames
- support Wake-on-WLAN with supported network detection
- RealTek (rtw89):
- improve Rx performance by using USB frame aggregation
- support USB 3 with RTL8822CU/RTL8822BU
- Intel (iwlwifi/mvm):
- offload RLC/SMPS functionality to firmware
- Marvell (mwifiex):
- add host based MLME to enable WPA3

- Bluetooth:
- add support for Amlogic HCI UART protocol
- add support for ISO data/packets to Intel and NXP drivers"

* tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1303 commits)
net/mlx5: HWS, check the correct variable in hws_send_ring_alloc_sq()
netfilter: nft_socket: Fix a NULL vs IS_ERR() bug in nft_socket_cgroup_subtree_level()
ice: Fix a NULL vs IS_ERR() check in probe()
ice: Fix a couple NULL vs IS_ERR() bugs
net: ethernet: fs_enet: Make the per clock optional
net: ti: icssg-prueth: Add multicast filtering support in HSR mode
net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload
net: ti: icssg-prueth: Add support for HSR frame forward offload
net: ti: icssg-prueth: Stop hardcoding def_inc
net: ti: icss-iep: Move icss_iep structure
net: ibm: emac: get rid of wol_irq
net: ibm: emac: remove all waiting code
net: ibm: emac: replace of_get_property
net: ibm: emac: use netdev's phydev directly
net: ibm: emac: use devm for register_netdev
net: ibm: emac: remove mii_bus with devm
net: ibm: emac: use devm for of_iomap
net: ibm: emac: manage emac_irq with devm
net: ibm: emac: use devm for alloc_etherdev
octeontx2-af: debugfs: Add Channel info to RPM map
...

show more ...

Merge tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2024-09-11

The

Merge tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2024-09-11

The first patch is by Uwe Kleine-König targets all CAN platform driver
and switches back the remove function to struct
platform_driver::remove().

A patch by Stefan Mätje fixes the help text of the ESD USB driver.

Jake Hamby's patch masks an unneeded interrupt in the m_can driver.

The last 2 patches target the rockchip_canfd driver. Arnd Bergmann's
patch reworks the delay calculation for the timekeeping worker, a
patch by me fixes the decoding of the error code register.

* tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of error code register
can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculation
can: m_can: m_can_chip_config(): mask timestamp wraparound IRQ
can: usb: Kconfig: Fix list of devices for esd_usb driver
can: Switch back to struct platform_driver::remove()
====================

Link: https://patch.msgid.link/20240912080438.2826895-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

can: Switch back to struct platform_driver::remove()

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platf

can: Switch back to struct platform_driver::remove()

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all can drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909072742.381003-2-u.kleine-koenig@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.

Merge tag 'v6.5' into next

Sync up with mainline to bring in updates to the shared infrastructure.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work fo

Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.

Core:

- Rework the sendpage & splice implementations

Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES

Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is

Remove the MSG_SENDPAGE_NOTLAST flag completely

- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid

- Enable socket busy polling with CONFIG_RT

- Improve reliability and efficiency of reporting for ref_tracker

- Auto-generate a user space C library for various Netlink families

Protocols:

- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]

- Use per-VMA locking for "page-flipping" TCP receive zerocopy

- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags

- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative

- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)

- Avoid waking up applications using TLS sockets until we have a full
record

- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring

- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address

- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch

- PPPoE: make number of hash bits configurable

- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)

- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)

- Support matching on Connectivity Fault Management (CFM) packets

- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug

- HSR: don't enable promiscuous mode if device offloads the proto

- Support active scanning in IEEE 802.15.4

- Continue work on Multi-Link Operation for WiFi 7

BPF:

- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators

- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything

- Accept dynptr memory as memory arguments passed to helpers

- Add routing table ID to bpf_fib_lookup BPF helper

- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands

- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)

- Show target_{obj,btf}_id in tracing link fdinfo

- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs

Netfilter:

- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value

- Increase ip_vs_conn_tab_bits range for 64BIT builds

- Allow updating size of a set

- Improve NAT tuple selection when connection is closing

Driver API:

- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)

- Support configuring rate selection pins of SFP modules

- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines

- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer

- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)

- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message

- Split devlink instance and devlink port operations

New hardware / drivers:

- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver

- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE

- CAN:
- Fintek F81604

Drivers:

- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10

- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)

- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of

- CAN: Kvaser PCIEcan:
- support packet timestamping

- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"

* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...

show more ...

Merge tag 'linux-can-next-for-6.5-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-05-15

The 1

Merge tag 'linux-can-next-for-6.5-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-05-15

The 1st patch is by Ji-Ze Hong and adds support for the Fintek F81604
USB-CAN adapter.

Jiapeng Chong's patch removes unnecessary dev_err() functions from the
bxcan driver.

The next patch is by me an makes a CAN internal header file self
contained.

The remaining 19 patches are by Uwe Kleine-König, they all convert the
platform driver remove callback to return void.

* tag 'linux-can-next-for-6.5-20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits)
can: xilinx: Convert to platform remove callback returning void
can: ti_hecc: Convert to platform remove callback returning void
can: sun4i_can: Convert to platform remove callback returning void
can: softing: Convert to platform remove callback returning void
can: sja1000_platform: Convert to platform remove callback returning void
can: sja1000_isa: Convert to platform remove callback returning void
can: rcar: Convert to platform remove callback returning void
can: mscan: mpc5xxx_can: Convert to platform remove callback returning void
can: m_can: Convert to platform remove callback returning void
can: janz-ican3: Convert to platform remove callback returning void
can: ifi_canfd: Convert to platform remove callback returning void
can: grcan: Convert to platform remove callback returning void
can: flexcan: Convert to platform remove callback returning void
can: ctucanfd: Convert to platform remove callback returning void
can: length: make header self contained
can: cc770_platform: Convert to platform remove callback returning void
can: bxcan: Remove unnecessary print function dev_err()
can: cc770_isa: Convert to platform remove callback returning void
can: usb: f81604: add Fintek F81604 support
can: c_can: Convert to platform remove callback returning void
...
====================

Link: https://lore.kernel.org/r/20230515205759.1003118-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge patch series "can: Convert to platform remove callback returning void"

Uwe Kleine-König <u.kleine-koenig@pengutronix.de> says:

this series converts the drivers below drivers/net/can to the
.r

Merge patch series "can: Convert to platform remove callback returning void"

Uwe Kleine-König <u.kleine-koenig@pengutronix.de> says:

this series converts the drivers below drivers/net/can to the
.remove_new() callback of struct platform_driver(). The motivation is to
make the remove callback less prone for errors and wrong assumptions.
See commit 5c5a7680e67b ("platform: Provide a remove callback that
returns no value") for a more detailed rationale.

All drivers already returned zero unconditionally in their
.remove() callback, so converting them to .remove_new() is trivial.

Link: https://lore.kernel.org/r/20230512212725.143824-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: janz-ican3: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do err

can: janz-ican3: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart from
emitting a warning) and this typically results in resource leaks. To improve
here there is a quest to make the remove callback return void. In the first
step of this quest all drivers are converted to .remove_new() which already
returns void. Eventually after all drivers are converted, .remove_new() is
renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230512212725.143824-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.

Merge drm/drm-next into drm-intel-next

Sync up with v6.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

Referen

Merge drm/drm-next into drm-intel-gt-next

Sync after v6.2-rc1 landed in drm-next.

We need to get some dependencies in place before we can merge
the fixes series from Gwan-gyeong and Chris.

References: https://lore.kernel.org/all/Y6x5JCDnh2rvh4lA@intel.com/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'v6.2-rc1' into media_tree

Linux 6.2-rc1

* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type propert

Merge tag 'v6.2-rc1' into media_tree

Linux 6.2-rc1

* tag 'v6.2-rc1': (14398 commits)
Linux 6.2-rc1
treewide: Convert del_timer*() to timer_shutdown*()
pstore: Properly assign mem_type property
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
cfi: Fix CFI failure with KASAN
perf python: Fix splitting CC into compiler and options
afs: Stop implementing ->writepage()
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs: remove variable nr_servers
afs: Fix lost servers_outstanding count
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
ALSA: azt3328: Remove the unused function snd_azf3328_codec_outl()
gcov: add support for checksum field
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
maple_tree: fix mas_spanning_rebalance() on insufficient data
hugetlb: really allocate vma lock for all sharable vmas
kmsan: export kmsan_handle_urb
kmsan: include linux/vmalloc.h
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
mm, mremap: fix mremap() expanding vma with addr inside vma
...

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.1-rc6 into drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'for-next' into for-linus

Merge branch 'main' into zstd-linus

Merge branch 'for-6.2/default-remove-cleanup' into for-linus

- removal of superfluous hid_hw_stop() calls for drivers with default
.remove callback (Marcus Folkesson)

Merge tag 'v6.1-rc8' into rdma.git for-next

For dependencies in following patches

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>