Merge tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The zero-copy changes are relatively significant, but regres

Merge tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"The zero-copy changes are relatively significant, but regression risk
should be contained. The feature needs to be used to cause trouble.

Also it feels like we got an order of magnitude more semi-automated
"refactoring" chaff than usual, I wonder if it's just us.

Core & protocols:

- Support Device Memory TCP, ability to zero-copy receive TCP
payloads to a DMABUF region of memory while packet headers land
separately in normal kernel buffers, and TCP processes then as
usual.

- The ability to read the PTP PHC (Physical Hardware Clock) alongside
MONOTONIC_RAW timestamps with PTP_SYS_OFFSET_EXTENDED. Previously
only CLOCK_REALTIME was supported.

- Allow matching on all bits of IP DSCP for routing decisions.
Previously we only supported on matching TOS bits in IPv4 which is
a narrower interpretation of the same header field.

- Increase the range of weights used for multi-path routing from
8 bits to 16 bits.

- Add support for IPv6 PIO p flag in the Prefix Information Option
per draft-ietf-6man-pio-pflag.

- IPv6 IOAM6 support for new tunsrc encap mode for better
performance.

- Detect destinations which blackhole MPTCP traffic and avoid
initiating MPTCP connections to them for a certain period of time,
1h by default.

- Improve IPsec control path performance by removing the inexact
policies list.

- AF_VSOCK: add support for SIOCOUTQ ioctl.

- Add enum for reasons TCP reset was sent for easier tracing.

- Add SMC ringbufs usage statistics.

Drivers:

- Handle netconsole setup failures more gracefully, don't fail
loading, retain the specified target as disabled.

- Extend bonding's IPsec offload pass thru capabilities (ESN, stats).

Filtering:

- Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime.

- Support using BPF skb helpers in tracepoints.

- Conntrack Netlink: support CTA_FILTER for flush.

- Improve SCTP support in nfnetlink_queue.

- Improve performance of large nftables flush transactions.

Things we sprinkled into general kernel code:

- selftests: support setting an "interpreter" for script files; make
it easy to run as separate cases tests where one "interpreter" is
fed various test descriptions (in our case packet sequences).

Driver API:

- Extend core and ethtool APIs to support many PHYs connected to a
single interface (PHY topologies).

- Extend cable diagnostics to specify whether Time Domain
Reflectometry (TDR) or Active Link Cable Diagnostic (ALCD) was
used.

- Add library for implementing MAC-PHY Ethernet drivers for SPI
devices compatible with Open Alliance 10BASE-T1x MAC-PHY Serial
Interface (TC6) standard.

- Add helpers to the PHY framework, for PHYs following the Open
Alliance standards:
- 1000BaseT1 link settings
- cable test and diagnostics

- Support listing / dumping all allocated RSS contexts.

- Add configuration for frequency Embedded SYNC in DPLL, which
magically embeds sync pulses into Ethernet signaling.

Device drivers:

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- use better FW APIs for queue reset
- support QOS and TPID settings for the SR-IOV VLAN
- support dynamic MSI-X allocation
- Intel (100G, ice, idpf):
- ice: support PCIe subfunctions
- iavf: add support for TC U32 filters on VFs
- ice: support Embedded SYNC in DPLL
- nVidia/Mellanox (mlx5):
- support HW managed steering tables
- support PCIe PTM cross timestamping
- AMD/Pensando:
- ionic: use page_pool to increase Rx performance
- Cisco (enic):
- report per-queue statistics

- Ethernet virtual:
- Microsoft vNIC:
- mana: support configuring ring length
- netvsc: enable more channels on systems with many CPUs
- IBM veth:
- optimize polling to improve TCP_RR performance
- optimize performance of Tx handling
- VirtIO net:
- synchronize the operstate with the admin state to allow a
lower virtio-net to propagate the link status to an upper
device like macvlan

- Ethernet NICs consumer, and embedded:
- Add driver for Realtek automotive PCIe devices (RTL9054,
RTL9068, RTL9072, RTL9075, RTL9068, RTL9071)
- Add driver for Microchip LAN8650/1 10BASE-T1S MAC-PHY.
- Microchip:
- lan743x: use phylink - support WOL, EEE, pause, link settings
- add Wake-on-LAN support for KSZ87xx family
- add KSZ8895/KSZ8864 switch support
- factor out FDMA code and use it in sparx5 and lan966x
(including DCB support in both)
- Synopsys (stmmac):
- support frame preemption (configured using TC and ethtool)
- support Loongson DWMAC (GMAC v3.73)
- support RockChips RK3576 DWMAC
- TI:
- am65-cpsw: add multi queue RX support
- icssg-prueth: HSR offload support
- Cadence (macb):
- enable software (hrtimer based) IRQ coalescing by default
- Xilinx (axinet):
- expose HW statistics
- improve multicast filtering
- relax Rx checksum offload constraints
- MediaTek:
- mt7530: add EN7581 support
- Aspeed (ftgmac100):
- report link speed and duplex
- Intel:
- igc: add mqprio offload
- igc: report EEE configuration
- RealTek (r8169):
- add support for RTL8126A rev.b
- Vitesse (vsc73xx):
- implement FDB add/del/dump operations
- Freescale (fs_enet):
- use phylink

- Ethernet PHYs:
- vitesse: implement downshift and MDI-X in vsc73xx PHYs
- microchip: support LAN887x, supporting IEEE 802.3bw (100BASE-T1)
and IEEE 802.3bp (1000BASE-T1) specifications
- add Applied Micro QT2025 PHY driver (in Rust)
- add Motorcomm yt8821 2.5G Ethernet PHY driver

- CAN:
- add driver for Rockchip RK3568 CAN-FD controller
- flexcan: add wakeup support for imx95
- kvaser_usb: set hardware timestamp on transmitted packets

- WiFi:
- mac80211/cfg80211:
- EHT rate support in AQL airtime fairness
- handle DFS (radar detection) per link in Multi-Link Operation
- RealTek (rtw89):
- support RTL8852BT and 8852BE-VT (WiFi 6)
- support hardware rfkill
- support HW encryption in unicast management frames
- support Wake-on-WLAN with supported network detection
- RealTek (rtw89):
- improve Rx performance by using USB frame aggregation
- support USB 3 with RTL8822CU/RTL8822BU
- Intel (iwlwifi/mvm):
- offload RLC/SMPS functionality to firmware
- Marvell (mwifiex):
- add host based MLME to enable WPA3

- Bluetooth:
- add support for Amlogic HCI UART protocol
- add support for ISO data/packets to Intel and NXP drivers"

* tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1303 commits)
net/mlx5: HWS, check the correct variable in hws_send_ring_alloc_sq()
netfilter: nft_socket: Fix a NULL vs IS_ERR() bug in nft_socket_cgroup_subtree_level()
ice: Fix a NULL vs IS_ERR() check in probe()
ice: Fix a couple NULL vs IS_ERR() bugs
net: ethernet: fs_enet: Make the per clock optional
net: ti: icssg-prueth: Add multicast filtering support in HSR mode
net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload
net: ti: icssg-prueth: Add support for HSR frame forward offload
net: ti: icssg-prueth: Stop hardcoding def_inc
net: ti: icss-iep: Move icss_iep structure
net: ibm: emac: get rid of wol_irq
net: ibm: emac: remove all waiting code
net: ibm: emac: replace of_get_property
net: ibm: emac: use netdev's phydev directly
net: ibm: emac: use devm for register_netdev
net: ibm: emac: remove mii_bus with devm
net: ibm: emac: use devm for of_iomap
net: ibm: emac: manage emac_irq with devm
net: ibm: emac: use devm for alloc_etherdev
octeontx2-af: debugfs: Add Channel info to RPM map
...

show more ...

Merge tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2024-09-11

The

Merge tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2024-09-11

The first patch is by Uwe Kleine-König targets all CAN platform driver
and switches back the remove function to struct
platform_driver::remove().

A patch by Stefan Mätje fixes the help text of the ESD USB driver.

Jake Hamby's patch masks an unneeded interrupt in the m_can driver.

The last 2 patches target the rockchip_canfd driver. Arnd Bergmann's
patch reworks the delay calculation for the timekeeping worker, a
patch by me fixes the decoding of the error code register.

* tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of error code register
can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculation
can: m_can: m_can_chip_config(): mask timestamp wraparound IRQ
can: usb: Kconfig: Fix list of devices for esd_usb driver
can: Switch back to struct platform_driver::remove()
====================

Link: https://patch.msgid.link/20240912080438.2826895-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

can: Switch back to struct platform_driver::remove()

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platf

can: Switch back to struct platform_driver::remove()

After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all can drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909072742.381003-2-u.kleine-koenig@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge drm/drm-next into drm-intel-next

Backmerge to bring Xe driver to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@k

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers,

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.8 release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'tip/perf/urgent'

Avoid conflicts, base on fixes.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.

Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support usec resolution of TCP timest

Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.

- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).

- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality

- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.

- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.

- Support sending fragmented skbs over vsock sockets.

- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().

- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.

- Add sysctl to control activation of TCP ping-pong mode.

- Add sysctl to make connection timeout in MPTCP configurable.

- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.

- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.

- Support selective FDB flushing in the VXLAN tunnel driver.

- Allow limiting learned FDB entries in bridges, prevent OOM attacks.

- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.

- Support multiple PTP timestamp event queue readers with different
filters.

- MCTP over I3C.

BPF:

- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.

- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:

https://lwn.net/Articles/938435/

- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.

This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.

- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.

- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.

- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.

- Allow source address selection with bpf_*_fib_lookup().

- Add ability to pin BPF timer to the current CPU.

- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.

- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.

- Inherit system settings for CPU security mitigations.

- Add BPF v4 CPU instruction support for arm32 and s390x.

Changes to common code:

- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.

- Process doc update with more guidance for reviewers.

Driver API:

- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.

- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.

- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.

- Rework PHY state machine to avoid races with calls to phy_stop().

- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.

- Allow antenna control on injected WiFi frames.

- Reduce the number of variants of napi_schedule().

- Simplify error handling when composing devlink health messages.

Misc:

- A lot of KCSAN data race "fixes", from Eric.

- A lot of __counted_by() annotations, from Kees.

- A lot of strncpy -> strscpy and printf format fixes.

- Replace master/slave terminology with conduit/user in DSA drivers.

- Handful of KUnit tests for netdev and WiFi core.

Removed:

- AppleTalk COPS.

- AppleTalk ipddp.

- TI AR7 CPMAC Ethernet driver.

Drivers:

- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload

- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)

- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region

- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port

- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking

- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers

- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support

- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"

* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...

show more ...

Merge tag 'linux-can-next-for-6.7-20231005' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-10-05

The f

Merge tag 'linux-can-next-for-6.7-20231005' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-10-05

The first patch is by Miquel Raynal and fixes a comment in the sja1000
driver.

Vincent Mailhol contributes 2 patches that fix W=1 compiler warnings
in the etas_es58x driver.

Jiapeng Chong's patch removes an unneeded NULL pointer check before
dev_put() in the CAN raw protocol.

A patch by Justin Stittreplaces a strncpy() by strscpy() in the
peak_pci sja1000 driver.

The next 5 patches are by me and fix the can_restart() handler and
replace BUG_ON()s in the CAN dev helpers with proper error handling.

The last 27 patches are also by me and target the at91_can driver.
First a new helper function is introduced, the at91_can driver is
cleaned up and updated to use the rx-offload helper.

* tag 'linux-can-next-for-6.7-20231005' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (37 commits)
can: at91_can: switch to rx-offload implementation
can: at91_can: at91_alloc_can_err_skb() introduce new function
can: at91_can: at91_irq_err_line(): send error counters with state change
can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()
can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off
can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter()
can: at91_can: at91_irq_err(): rename to at91_irq_err_line()
can: at91_can: at91_irq_err_frame(): move next to at91_irq_err()
can: at91_can: at91_irq_err_frame(): call directly from IRQ handler
can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM
can: at91_can: at91_poll_err(): fold in at91_poll_err_frame()
can: at91_can: add CAN transceiver support
can: at91_can: at91_open(): forward request_irq()'s return value in case or an error
can: at91_can: at91_chip_start(): don't disable IRQs twice
can: at91_can: at91_set_bittiming(): demote register output to debug level
can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail}
can: at91_can: at91_setup_mailboxes(): update comments
can: at91_can: add more register definitions
can: at91_can: MCR Register: convert to FIELD_PREP()
can: at91_can: MSR Register: convert to FIELD_PREP()
...
====================

Link: https://lore.kernel.org/r/20231005195812.549776-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge patch series "can: at91: add can_state_get_by_berr_counter() helper, cleanup and convert to rx_offload"

Marc Kleine-Budde <mkl@pengutronix.de> says:

This series first introduces the can_state

Merge patch series "can: at91: add can_state_get_by_berr_counter() helper, cleanup and convert to rx_offload"

Marc Kleine-Budde <mkl@pengutronix.de> says:

This series first introduces the can_state_get_by_berr_counter()
helper function. It returns the current TX and RX state depending on
the provided CAN bit error counters. It will be later used by the
at91_can driver.

The remaining patches of this series first clean up the at91_can
driver, clean up the bus- and line error (including bus-off) handling,
and then convert it use the rx_offload helper. The driver works better
under high system load and the order of received CAN frames is better
maintained.

Due to a hardware limitation the converted driver could trigger a race
condition in the can_restart() CAN bus-off handler. The patch series
[1] fixes the issue.

[1] https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-0-91b5c1fd922c@pengutronix.de

Changes in v2:
- 1/27: can_state_err_to_state(): use symbolic error values instead of
plain numbers (Thanks Vincent)
- 27/27: fix patch description and typos (Thanks Vincent)
- Link to v1: https://lore.kernel.org/all/20231004-at91_can-rx_offload-v1-0-c32bf99097db@pengutronix.de

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-0-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: at91_can: switch to rx-offload implementation

The current at91_can driver uses NAPI to handle RX'ed CAN frames, the
RX IRQ is disabled and a NAPI poll is scheduled. Then in
at91_poll_rx() the R

can: at91_can: switch to rx-offload implementation

The current at91_can driver uses NAPI to handle RX'ed CAN frames, the
RX IRQ is disabled and a NAPI poll is scheduled. Then in
at91_poll_rx() the RX'ed CAN frames are tried to read in order from
the device.

This approach has 2 drawbacks:

- Under high system load it might take too long from the initial RX
IRQ to the NAPI poll function to run. This causes RX buffer
overflows.
- The algorithm to read the CAN frames in order is not bullet proof
and may fail under certain use cases/system loads.

The rx-offload helper fixes these problems by reading the RX'ed CAN
frames in the interrupt handler and adding it to a list sorted by RX
timestamp. This list of RX'ed SKBs is then passed to the networking
stack via NAPI.

Convert the RX path to rx-offload, pass all CAN error frames with
can_rx_offload_queue_timestamp().

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-27-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: at91_can: at91_alloc_can_err_skb() introduce new function

This is a preparation patch to convert the driver to make use of the
rx-offload helper. With rx-offload the received CAN frames are sor

can: at91_can: at91_alloc_can_err_skb() introduce new function

This is a preparation patch to convert the driver to make use of the
rx-offload helper. With rx-offload the received CAN frames are sorted
by their timestamp. Regular CAN RX'ed and TX'ed CAN frames are
timestamped by the hardware. Error events are not.

Introduce a new function at91_alloc_can_err_skb() the allocates an
error SKB and reads the current timestamp from the controller.

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-26-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: at91_can: at91_irq_err_line(): send error counters with state change

Since 3e5c291c7942 ("can: add CAN_ERR_CNT flag to notify availability
of error counter") there is a dedicated flag to inform

can: at91_can: at91_irq_err_line(): send error counters with state change

Since 3e5c291c7942 ("can: add CAN_ERR_CNT flag to notify availability
of error counter") there is a dedicated flag to inform the user space,
that there are CAN error counters in the CAN error frame.

In case the device is not in bus off mode, send the error counters to
user space and set CAN_ERR_CNT.

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-25-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()

The driver implements a hand crafted CAN state handling. Update the
driver to make use of can_change_state(), int

can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()

The driver implements a hand crafted CAN state handling. Update the
driver to make use of can_change_state(), introduced in ("can: dev:
Consolidate and unify state change handling")

Also switch from hand crafted CAN bus off handling to can_bus_off():
In case of a bus off, abort all pending TX requests, switch off the
device and let can_bus_off() handle the device restart.

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-24-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off

The at91 CAN controller automatically recovers from bus-off after 128
occurrences of 11 consecutive recessive bits.

After an

can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off

The at91 CAN controller automatically recovers from bus-off after 128
occurrences of 11 consecutive recessive bits.

After an auto-recovered bus-off, the error counters no longer reflect
this fact. On the sam9263 the state bits in the SR register show the
current state (based on the current error counters), while on sam9x5
and newer SoCs these bits are latched.

Take any latched bus-off information from the SR register into account
when calculating the CAN new state, to start the standard CAN bus off
handling.

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-23-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter()

On the sam9263 the SR bits for bus off, error passive, warning limit,
and error active are not latched and reflect the

can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter()

On the sam9263 the SR bits for bus off, error passive, warning limit,
and error active are not latched and reflect the current status of the
controller. On the sam9x5 and newer SoCs these bits are latched.

To simplify the code, use can_state_get_by_berr_counter() to get the
state of the controller regardless of the SoC version.

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-22-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: at91_can: at91_irq_err(): rename to at91_irq_err_line()

This is a cleanup patch, no functional change intended.

The function at91_irq_err() only handles the CAN line errors, so
rename it accor

can: at91_can: at91_irq_err(): rename to at91_irq_err_line()

This is a cleanup patch, no functional change intended.

The function at91_irq_err() only handles the CAN line errors, so
rename it accordingly to at91_irq_err_line().

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-21-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: at91_can: at91_irq_err_frame(): move next to at91_irq_err()

This is a cleanup patch, no functional change intended. As
at91_irq_err_frame() is called from the IRQ handler move it in front
of th

can: at91_can: at91_irq_err_frame(): move next to at91_irq_err()

This is a cleanup patch, no functional change intended. As
at91_irq_err_frame() is called from the IRQ handler move it in front
of the IRQ handler next to at91_irq_err().

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-20-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: at91_can: at91_irq_err_frame(): call directly from IRQ handler

This is a preparation patch to convert the driver to the rx-offload
helper. In rx-offload RX, TX-done and CAN error handling are d

can: at91_can: at91_irq_err_frame(): call directly from IRQ handler

This is a preparation patch to convert the driver to the rx-offload
helper. In rx-offload RX, TX-done and CAN error handling are done in
the IRQ handler, SKB are pushed to the network stack in the NAPI poll
function.

Move the CAN frame error handling from the NAPI function at91_poll()
to the IRQ handler at91_poll(). To reflect this change, rename
at91_poll_err() to at91_irq_err_frame().

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-19-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM

at91_poll_err() allocates a can error SKB, to inform the user space
about the CAN error. Then it fills the SKB with inform

can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM

at91_poll_err() allocates a can error SKB, to inform the user space
about the CAN error. Then it fills the SKB with information the error
information and increases the net device error stats.

In case no SBK can be allocated (e.g. due to an OOM) or the NAPI quota
is 0 the function is left early and no stats are updated. This is not
helpful to the user, as there is no information about the faulty CAN
bus.

Increase the error stats even if no quota is left or no SKB can be
allocated.

While there treat No-Acknowledgment as a bus error, too.

Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-18-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...