Revision tags: v6.7-rc5, v6.7-rc4, v6.7-rc3, v6.7-rc2, v6.7-rc1, v6.6, v6.6-rc7, v6.6-rc6, v6.6-rc5, v6.6-rc4, v6.6-rc3, v6.6-rc2, v6.6-rc1, v6.5, v6.5-rc7, v6.5-rc6, v6.5-rc5, v6.5-rc4, v6.5-rc3, v6.5-rc2, v6.5-rc1, v6.4, v6.4-rc7, v6.4-rc6, v6.4-rc5, v6.4-rc4, v6.4-rc3, v6.4-rc2, v6.4-rc1, v6.3, v6.3-rc7, v6.3-rc6, v6.3-rc5, v6.3-rc4, v6.3-rc3, v6.3-rc2, v6.3-rc1, v6.2, v6.2-rc8, v6.2-rc7, v6.2-rc6, v6.2-rc5, v6.2-rc4, v6.2-rc3, v6.2-rc2, v6.2-rc1, v6.1, v6.1-rc8, v6.1-rc7, v6.1-rc6, v6.1-rc5, v6.1-rc4, v6.1-rc3, v6.1-rc2, v6.1-rc1, v6.0, v6.0-rc7, v6.0-rc6, v6.0-rc5, v6.0-rc4, v6.0-rc3, v6.0-rc2, v6.0-rc1, v5.19, v5.19-rc8, v5.19-rc7, v5.19-rc6, v5.19-rc5, v5.19-rc4, v5.19-rc3, v5.19-rc2, v5.19-rc1, v5.18, v5.18-rc7, v5.18-rc6, v5.18-rc5, v5.18-rc4, v5.18-rc3, v5.18-rc2, v5.18-rc1, v5.17, v5.17-rc8, v5.17-rc7, v5.17-rc6, v5.17-rc5, v5.17-rc4, v5.17-rc3, v5.17-rc2, v5.17-rc1, v5.16, v5.16-rc8, v5.16-rc7, v5.16-rc6, v5.16-rc5, v5.16-rc4, v5.16-rc3, v5.16-rc2, v5.16-rc1, v5.15, v5.15-rc7, v5.15-rc6, v5.15-rc5, v5.15-rc4, v5.15-rc3, v5.15-rc2, v5.15-rc1, v5.14, v5.14-rc7, v5.14-rc6, v5.14-rc5, v5.14-rc4, v5.14-rc3, v5.14-rc2, v5.14-rc1, v5.13, v5.13-rc7, v5.13-rc6, v5.13-rc5, v5.13-rc4, v5.13-rc3, v5.13-rc2, v5.13-rc1, v5.12, v5.12-rc8, v5.12-rc7, v5.12-rc6, v5.12-rc5, v5.12-rc4, v5.12-rc3, v5.12-rc2, v5.12-rc1-dontuse, v5.11, v5.11-rc7, v5.11-rc6, v5.11-rc5, v5.11-rc4, v5.11-rc3, v5.11-rc2, v5.11-rc1 |
|
#
4b419325 |
| 15-Dec-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.11 merge window.
|
Revision tags: v5.10, v5.10-rc7, v5.10-rc6, v5.10-rc5 |
|
#
05909cd9 |
| 18-Nov-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.9' into next
Sync up with mainline to bring in the latest DTS files.
|
Revision tags: v5.10-rc4, v5.10-rc3, v5.10-rc2, v5.10-rc1, v5.9, v5.9-rc8, v5.9-rc7, v5.9-rc6, v5.9-rc5, v5.9-rc4 |
|
#
ead5d1f4 |
| 01-Sep-2020 |
Jiri Kosina <jkosina@suse.cz> |
Merge branch 'master' into for-next
Sync with Linus' branch in order to be able to apply fixups of more recent patches.
|
Revision tags: v5.9-rc3, v5.9-rc2, v5.9-rc1 |
|
#
3b5d1afd |
| 03-Aug-2020 |
Takashi Iwai <tiwai@suse.de> |
Merge branch 'for-next' into for-linus
|
Revision tags: v5.8, v5.8-rc7, v5.8-rc6, v5.8-rc5, v5.8-rc4 |
|
#
98817a84 |
| 30-Jun-2020 |
Thomas Gleixner <tglx@linutronix.de> |
Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix atomicity of affinity update in the G
Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix atomicity of affinity update in the GIC driver - Don't sleep in atomic when waiting for a GICv4.1 RD to respond - Fix a couple of typos in user-visible messages
show more ...
|
#
77346a70 |
| 30-Jun-2020 |
Joerg Roedel <jroedel@suse.de> |
Merge tag 'v5.8-rc3' into arm/qcom
Linux 5.8-rc3
|
#
60e9eabf |
| 29-Jun-2020 |
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> |
Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.la
Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
show more ...
|
Revision tags: v5.8-rc3 |
|
#
0f69403d |
| 25-Jun-2020 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking API: convert mmap_sem comments").
Signed-off-by: Jani Nikula <jani.nikula@inte
Merge drm/drm-next into drm-intel-next-queued
Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking API: convert mmap_sem comments").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
show more ...
|
Revision tags: v5.8-rc2 |
|
#
6870112c |
| 17-Jun-2020 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.8-rc1' into regulator-5.8
Linux 5.8-rc1
|
#
07c7b547 |
| 16-Jun-2020 |
Tony Lindgren <tony@atomide.com> |
Merge tag 'v5.8-rc1' into fixes
Linux 5.8-rc1
|
#
4b3c1f1b |
| 16-Jun-2020 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge v5.8-rc1 into drm-misc-fixes
Beginning a new release cycles for what will become v5.8. Updating drm-misc-fixes accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v5.8-rc1 |
|
#
8440d4a7 |
| 12-Jun-2020 |
Rob Herring <robh@kernel.org> |
Merge branch 'dt/schema-cleanups' into dt/linus
|
#
f77d26a9 |
| 11-Jun-2020 |
Thomas Gleixner <tglx@linutronix.de> |
Merge branch 'x86/entry' into ras/core
to fixup conflicts in arch/x86/kernel/cpu/mce/core.c so MCE specific follow up patches can be applied without creating a horrible merge conflict afterwards.
|
#
c5d6c138 |
| 02-Jun-2020 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "MMC core: - Enable erase/discard/trim support for all (e)MMC/SD hosts - Expo
Merge tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "MMC core: - Enable erase/discard/trim support for all (e)MMC/SD hosts - Export information through sysfs about enhanced RPMB support (eMMC v5.1+) - Align the initialization commands for SDIO cards - Fix SDIO initialization to prevent memory leaks and NULL pointer errors - Do not export undefined MMC_NAME/MODALIAS for SDIO cards - Export device/vendor field from common CIS for SDIO cards - Move SDIO IDs from functional drivers to the common SDIO header - Introduce the ->request_atomic() host ops
MMC host: - Improve support for HW busy signaling for several hosts - Converting some DT bindings to the json-schema - meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller - meson-mx-sdio: Run a soft reset to recover from timeout/CRC error - mmci: Convert to use mmc_regulator_set_vqmmc() - mmci_stm32_sdmmc: Fix a couple of DMA bugs - mmci_stm32_sdmmc: Fix power on issue - renesas,mmcif,sdhci: Document r8a7742 DT bindings - renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions - renesas_sdhi: Improvements to the TAP selection - renesas_sdhi/tmio: Further fixup runtime PM management at ->remove() - sdhci: Introduce ops to dump vendor specific registers - sdhci-cadence: Fix PHY write sequence - sdhci-esdhc-imx: Improve tunings - sdhci-esdhc-imx: Enable GPIO card detect as system wakeup - sdhci-esdhc-imx: Add HS400 support for i.MX6SLL - sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller - m68k: mcf5441x: Add platform data to enable esdhc mmc controller - sdhci-msm: Improve HS400 tuning - sdhci-msm: Dump vendor specific registers at error - sdhci-msm: Add support for DLL/DDR properties provided from DT - sdhci-msm: Add support for the sm8250 variant - sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate() - sdhci-of-arasan: Add support for Intel Keem Bay variant - sdhci-of-arasan: Add support for Xilinx Versal SD variant - sdhci-of-dwcmshc: Add support for system suspend/resume - sdhci-of-dwcmshc: Fix UHS signaling support - sdhci-of-esdhc: Fix tuning for eMMC HS400 mode - sdhci-pci-gli: Add Genesys Logic GL9763E support - sdhci-sprd: Add support for the ->request_atomic() ops - sdhci-tegra: Avoid reading autocal timeout values when not applicable
MEMSTICK: - Minor trivial update"
* tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (127 commits) dt-bindings: mmc: Convert sdhci-pxa to json-schema mmc: sdhci-msm: Clear tuning done flag while hs400 tuning mmc: core: Export device/vendor ids from Common CIS for SDIO cards mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cards mmc: sdhci-of-at91: fix CALCR register being rewritten mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuning mmc: sdhci-esdhc-imx: fix the mask for tuning start point mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pin mmc: mmci_sdmmc: fix DMA API warning max segment size mmc: mmci_sdmmc: fix DMA API warning overlapping mappings mmc: sdhci-of-arasan: Add support for Intel Keem Bay dt-bindings: mmc: arasan: Add compatible strings for Intel Keem Bay mmc: sdhci-cadence: fix PHY write mmc: sdio: Sort all SDIO IDs in common include file mmc: sdio: Fix Cypress SDIO IDs macros in common include file mmc: sdio: Move SDIO IDs from b43-sdio driver to common include file mmc: sdio: Move SDIO IDs from ath10k driver to common include file mmc: sdio: Move SDIO IDs from ath6kl driver to common include file mmc: sdio: Move SDIO IDs from smssdio driver to common include file mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file ...
show more ...
|
Revision tags: v5.7, v5.7-rc7, v5.7-rc6 |
|
#
e4bf1b09 |
| 12-May-2020 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host
The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC card interface with 1/4/8-bit bus width. It supports eMMC s
mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host
The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC card interface with 1/4/8-bit bus width. It supports eMMC spec 4.4x/4.5x including HS200 (up to 100MHz clock).
The public S805 datasheet [0] contains a short documentation about the registers. Unfortunately it does not describe how to use the registers to make the hardware work. Thus this driver is based on reading (and understanding) the Amlogic 3.10 GPL kernel code.
Some hardware details are not easy to see. Jianxin Pan was kind enough to answer my questions: The hardware has built-in busy timeout support. The maximum timeout is 30 seconds. This is only documented in Amlogic's internal documentation.
The controller only works with very specific clock configurations. The details are not part of the public datasheet. In my own words the supported configurations are: - 399.812kHz: clkin = 850MHz div = 2126 sd_rx_phase = 63 - 1MHz: clkin = 850MHz div = 850 sd_rx_phase = 55 - 5.986MHz: clkin = 850MHz div = 142 sd_rx_phase = 24 - 25MHz: clkin = 850MHz div = 34 sd_rx_phase = 15 - 47.222MHz: clkin = 850MHz div = 18 sd_rx_phase = 11/15 (SDR50/HS) - 53.125MHz: clkin = 850MHz div = 16 sd_rx_phase = (tuning) - 70.833MHz: clkin = 850MHz div = 12 sd_rx_phase = (tuning) - 85MHz: clkin = 850MHz div = 10 sd_rx_phase = (tuning) - 94.44MHz: clkin = 850MHz div = 9 sd_rx_phase = (tuning) - 106.25MHz: clkin = 850MHz div = 8 sd_rx_phase = (tuning) - 127.5MHz: clkin = 1275MHz div = 10 sd_rx_phase = (tuning) - 141.667MHz: clkin = 850MHz div = 6 sd_rx_phase = (tuning) - 159.375MHz: clkin = 1275MHz div = 8 sd_rx_phase = (tuning) - 212.5MHz: clkin = 1275MHz div = 6 sd_rx_phase = (tuning) - (sd_tx_phase is always 1, 94.44MHz is not listed in the datasheet but this is what the 3.10 BSP kernel on Odroid-C1 actually uses)
NOTE: CMD23 support is disabled for now because it results in command timeouts and thus decreases read performance.
Tested-by: Wei Wang <lnykww@gmail.com> Tested-by: Xin Yin <yinxin_1989@aliyun.com> Reviewed-by: Xin Yin <yinxin_1989@aliyun.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200512204147.504087-3-martin.blumenstingl@googlemail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|