Input: pcap_keys - remove unused driver

Support for the ezx series of phones was removed in 2022, this
driver is just dead code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msg

Input: pcap_keys - remove unused driver

Support for the ezx series of phones was removed in 2022, this
driver is just dead code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260430164326.2766500-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: pf1550 - add onkey support

Add support for the onkey of the pf1550 PMIC.

Signed-off-by: Samuel Kayode <samuel.kayode@savoirfairelinux.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.co

Input: pf1550 - add onkey support

Add support for the onkey of the pf1550 PMIC.

Signed-off-by: Samuel Kayode <samuel.kayode@savoirfairelinux.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20251001-pf1550-v12-4-a3302aa41687@savoirfairelinux.com
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Input: aw86927 - add driver for Awinic AW86927

Add support for the I2C-connected Awinic AW86927 LRA haptic driver.

This driver includes a hardcoded sine waveform to be uploaded to the
AW86927's SRA

Input: aw86927 - add driver for Awinic AW86927

Add support for the I2C-connected Awinic AW86927 LRA haptic driver.

This driver includes a hardcoded sine waveform to be uploaded to the
AW86927's SRAM for haptic playback.
This driver does not currently support all the capabilities of the
AW86927, such as F0 calibration, RTP mode, and CONT mode.

Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://lore.kernel.org/r/20250925-aw86927-v3-2-1fc6265b42de@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Merge tag 'ib-mfd-gpio-input-pinctrl-pwm-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Sync up with MFD tree to bring in support for MAX7360.

input: misc: Add support for MAX7360 rotary

Add driver for Maxim Integrated MAX7360 rotary encoder controller,
supporting a single rotary switch.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.co

input: misc: Add support for MAX7360 rotary

Add driver for Maxim Integrated MAX7360 rotary encoder controller,
supporting a single rotary switch.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-9-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

input: tps6594-pwrbutton: Add power button functionality

TPS6594 defines two interrupts for the power button one for push and
one for release.

This driver is very simple in that it maps the push in

input: tps6594-pwrbutton: Add power button functionality

TPS6594 defines two interrupts for the power button one for push and
one for release.

This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.

Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250826134631.1499936-2-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Input: pcf50633-input - remove the driver

The pcf50633 was used as part of the OpenMoko devices but the support
for its main chip was recently removed in: commit 61b7f8920b17 ("ARM:
s3c: remove all

Input: pcf50633-input - remove the driver

The pcf50633 was used as part of the OpenMoko devices but the support
for its main chip was recently removed in: commit 61b7f8920b17 ("ARM:
s3c: remove all s3c24xx support")

Remove the input driver.

This was originally posted as a set of pcf50633 removals in March,
and is the only major component that hasn't been picked up.
https://lore.kernel.org/all/20250311014959.743322-1-linux@treblig.org/

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250629212820.319584-1-linux@treblig.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: add driver for the input part of qnap-mcu devices

The MCU controls the power-button and beeper, so expose them as input
device. There is of course no interrupt line, so the status of the
powe

Input: add driver for the input part of qnap-mcu devices

The MCU controls the power-button and beeper, so expose them as input
device. There is of course no interrupt line, so the status of the
power-button needs to be polled. To generate an event the power-button
also needs to be held for 1-2 seconds, so the polling interval does
not need to be overly fast.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20241107114712.538976-7-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Merge branch 'ib-mfd-input-regulator-6.11' into ibs-for-mfd-merged

input: Add onkey driver for Marvell 88PM886 PMIC

Marvell 88PM886 PMIC provides onkey among other things. Add client
driver to handle it. The driver currently only provides a basic support
omitting a

input: Add onkey driver for Marvell 88PM886 PMIC

Marvell 88PM886 PMIC provides onkey among other things. Add client
driver to handle it. The driver currently only provides a basic support
omitting additional functions found in the vendor version, such as long
onkey and GPIO integration.

Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240531175109.15599-5-balejk@matfyz.cz
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Input: cs40l50 - Add support for the CS40L50 haptic driver

Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.

The i

Input: cs40l50 - Add support for the CS40L50 haptic driver

Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.

The input driver provides the interface for control of
haptic effects through the device.

Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240620161745.2312359-5-jogletre@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Input: bbnsm_pwrkey - add bbnsm power key support

The ON/OFF logic inside the BBNSM allows for connecting directly
into a PMIC or other voltage regulator device. The module has an
button input signa

Input: bbnsm_pwrkey - add bbnsm power key support

The ON/OFF logic inside the BBNSM allows for connecting directly
into a PMIC or other voltage regulator device. The module has an
button input signal and a wakeup request input signal. It also
has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an
active-low PMIC enable (pmic_en_b) output.

Add the power key support for the ON/OFF button function found in
BBNSM module.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230215024117.3357341-2-ping.bai@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: Add tps65219 interrupt driven powerbutton

TPS65219 has different interrupts compared to other TPS6521* chips.
TPS65219 defines two interrupts for the powerbutton one for push and one
for rele

Input: Add tps65219 interrupt driven powerbutton

TPS65219 has different interrupts compared to other TPS6521* chips.
TPS65219 defines two interrupts for the powerbutton one for push and one
for release.

This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221104152311.1098603-6-jneanne@baylibre.com

show more ...

mfd: Remove dm355evm_msp driver

The DaVinci DM355EVM platform is gone after the removal of all
unused board files, so the MTD device along with its sub-devices
can be removed as well.

Signed-off-by

mfd: Remove dm355evm_msp driver

The DaVinci DM355EVM platform is gone after the removal of all
unused board files, so the MTD device along with its sub-devices
can be removed as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019152947.3857217-7-arnd@kernel.org

show more ...

Input: rt5120 - add power key support

Add RT5120 PMIC power key support.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1660100142-32493-4-git-send-email-u00845

Input: rt5120 - add power key support

Add RT5120 PMIC power key support.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1660100142-32493-4-git-send-email-u0084500@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: Add IBM Operation Panel driver

Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bu

Input: Add IBM Operation Panel driver

Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bus, so the driver registers
as an I2C slave device.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C slave parts
Link: https://lore.kernel.org/r/20220809204147.238132-3-eajames@linux.ibm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: add support for Azoteq IQS7222A/B/C

This patch adds support for the Azoteq IQS7222A/B/C family of
capacitive touch controllers.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://l

Input: add support for Azoteq IQS7222A/B/C

This patch adds support for the Azoteq IQS7222A/B/C family of
capacitive touch controllers.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220403221659.865997-3-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: remove dead CSR Prima2 PWRC driver

Commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms") removes
the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig.

Hence, since then, the corr

Input: remove dead CSR Prima2 PWRC driver

Commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms") removes
the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig.

Hence, since then, the corresponding CSR Prima2 PWRC Driver is dead code.
Remove this dead driver.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210817072842.8640-1-lukas.bulwahn@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: ixp4xx-beeper - delete driver

The NSLU2 has been migrated to devicetree and there we use
the gpio-beeper.c driver instead, the boardfile will be deleted
for kernel v5.15 so drop this custom a

Input: ixp4xx-beeper - delete driver

The NSLU2 has been migrated to devicetree and there we use
the gpio-beeper.c driver instead, the boardfile will be deleted
for kernel v5.15 so drop this custom and now unneeded driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210714115028.916360-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series,

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- three new touchscreen drivers: Hycon HY46XX, ILITEK Lego Series,
and MStar MSG2638

- a new driver for Azoteq IQS626A proximity and touch controller

- addition of Amazon Game Controller to the list of devices handled
by the xpad driver

- Elan touchscreen driver will avoid binding to devices described as
I2CHID compatible in ACPI tables

- various driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (56 commits)
Input: xpad - add support for Amazon Game Controller
Input: ili210x - add missing negation for touch indication on ili210x
MAINTAINERS: repair reference in HYCON HY46XX TOUCHSCREEN SUPPORT
Input: add driver for the Hycon HY46XX touchpanel series
dt-bindings: touchscreen: Add HY46XX bindings
dt-bindings: Add Hycon Technology vendor prefix
Input: cyttsp - flag the device properly
Input: cyttsp - set abs params for ABS_MT_TOUCH_MAJOR
Input: cyttsp - drop the phys path
Input: cyttsp - reduce reset pulse timings
Input: cyttsp - error message on boot mode exit error
Input: apbps2 - remove useless variable
Input: mms114 - support MMS136
Input: mms114 - convert bindings to YAML and extend
Input: Add support for ILITEK Lego Series
dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings
Input: add MStar MSG2638 touchscreen driver
dt-bindings: input/touchscreen: add bindings for msg2638
Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state
Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices
...

show more ...

Input: Add support for Azoteq IQS626A

This patch adds support for the Azoteq IQS626A capacitive touch
controller.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/2021

Input: Add support for Azoteq IQS626A

This patch adds support for the Azoteq IQS626A capacitive touch
controller.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210301234928.4298-5-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

input: atc260x: Add onkey driver for ATC260x PMICs

The Actions Semi ATC260x PMICs are able to manage an onkey button.
This driver exposes the ATC260x onkey as an input device. It can also
be configu

input: atc260x: Add onkey driver for ATC260x PMICs

The Actions Semi ATC260x PMICs are able to manage an onkey button.
This driver exposes the ATC260x onkey as an input device. It can also
be configured to force a system reset on a long key-press with an
adjustable duration.

The currently supported chip variants are ATC2603C and ATC2609A.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

show more ...

Input: new da7280 haptic driver

Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with
multiple mode and integrated waveform memory and wideband support.
It communicates via an I2C bus to the

Input: new da7280 haptic driver

Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with
multiple mode and integrated waveform memory and wideband support.
It communicates via an I2C bus to the device.

Signed-off-by: Roy Im <roy.im.opensource@diasemi.com>
Reviewed-by: Jes Sorensen <Jes.Sorensen@gmail.com>.
Link: https://lore.kernel.org/r/1e293e8c4830b09255af3b7e1721b73afaefdfa3.1606320459.git.Roy.Im@diasemi.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: add driver for power button on Dell Wyse 3020

This adds support for the power button attached to the Embedded Controller
on a Dell Wyse 3020 "Ariel" board.

The Embedded Controller's SPI inte

Input: add driver for power button on Dell Wyse 3020

This adds support for the power button attached to the Embedded Controller
on a Dell Wyse 3020 "Ariel" board.

The Embedded Controller's SPI interface is actually capable sending and
receiving the PS/2 keyboard and mouse protocol data, which looks like
a good fit for a serio driver. Howerver, I don't know of any machines where
this is actually used.

My board only has a single power button and no way to connect an actual
keyboard or a mouse. Using the atkbd driver with serio would be an overkill
and would be inconvenient for the userspace. Therefore this driver
registers an input device that is only capable of reporting the power
button presses and releases.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20201201083533.1724287-3-lkundrak@v3.sk
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: add support for Azoteq IQS269A

This patch adds support for the Azoteq IQS269A capacitive touch
controller.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/1588

Input: add support for Azoteq IQS269A

This patch adds support for the Azoteq IQS269A capacitive touch
controller.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/1588352982-5117-2-git-send-email-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...