Input: pcap_keys - remove unused driver

Support for the ezx series of phones was removed in 2022, this
driver is just dead code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msg

Input: pcap_keys - remove unused driver

Support for the ezx series of phones was removed in 2022, this
driver is just dead code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260430164326.2766500-1-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: pf1550 - add onkey support

Add support for the onkey of the pf1550 PMIC.

Signed-off-by: Samuel Kayode <samuel.kayode@savoirfairelinux.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.co

Input: pf1550 - add onkey support

Add support for the onkey of the pf1550 PMIC.

Signed-off-by: Samuel Kayode <samuel.kayode@savoirfairelinux.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20251001-pf1550-v12-4-a3302aa41687@savoirfairelinux.com
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Input: aw86927 - add driver for Awinic AW86927

Add support for the I2C-connected Awinic AW86927 LRA haptic driver.

This driver includes a hardcoded sine waveform to be uploaded to the
AW86927's SRA

Input: aw86927 - add driver for Awinic AW86927

Add support for the I2C-connected Awinic AW86927 LRA haptic driver.

This driver includes a hardcoded sine waveform to be uploaded to the
AW86927's SRAM for haptic playback.
This driver does not currently support all the capabilities of the
AW86927, such as F0 calibration, RTP mode, and CONT mode.

Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
Link: https://lore.kernel.org/r/20250925-aw86927-v3-2-1fc6265b42de@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Merge tag 'ib-mfd-gpio-input-pinctrl-pwm-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Sync up with MFD tree to bring in support for MAX7360.

input: misc: Add support for MAX7360 rotary

Add driver for Maxim Integrated MAX7360 rotary encoder controller,
supporting a single rotary switch.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.co

input: misc: Add support for MAX7360 rotary

Add driver for Maxim Integrated MAX7360 rotary encoder controller,
supporting a single rotary switch.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-9-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

input: tps6594-pwrbutton: Add power button functionality

TPS6594 defines two interrupts for the power button one for push and
one for release.

This driver is very simple in that it maps the push in

input: tps6594-pwrbutton: Add power button functionality

TPS6594 defines two interrupts for the power button one for push and
one for release.

This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.

Signed-off-by: Job Sava <jsava@criticallink.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20250826134631.1499936-2-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Input: pcf50633-input - remove the driver

The pcf50633 was used as part of the OpenMoko devices but the support
for its main chip was recently removed in: commit 61b7f8920b17 ("ARM:
s3c: remove all

Input: pcf50633-input - remove the driver

The pcf50633 was used as part of the OpenMoko devices but the support
for its main chip was recently removed in: commit 61b7f8920b17 ("ARM:
s3c: remove all s3c24xx support")

Remove the input driver.

This was originally posted as a set of pcf50633 removals in March,
and is the only major component that hasn't been picked up.
https://lore.kernel.org/all/20250311014959.743322-1-linux@treblig.org/

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250629212820.319584-1-linux@treblig.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: max77693 - add max77705 haptic support

Add support for haptic controller on MAX77705 Multifunction
device.

This driver supports external pwm and LRA (Linear Resonant Actuator) motor.
User ca

Input: max77693 - add max77705 haptic support

Add support for haptic controller on MAX77705 Multifunction
device.

This driver supports external pwm and LRA (Linear Resonant Actuator) motor.
User can control the haptic device via force feedback framework.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-6-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Input: add driver for the input part of qnap-mcu devices

The MCU controls the power-button and beeper, so expose them as input
device. There is of course no interrupt line, so the status of the
powe

Input: add driver for the input part of qnap-mcu devices

The MCU controls the power-button and beeper, so expose them as input
device. There is of course no interrupt line, so the status of the
power-button needs to be polled. To generate an event the power-button
also needs to be held for 1-2 seconds, so the polling interval does
not need to be overly fast.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20241107114712.538976-7-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Merge branch 'ib-mfd-input-regulator-6.11' into ibs-for-mfd-merged

input: Add onkey driver for Marvell 88PM886 PMIC

Marvell 88PM886 PMIC provides onkey among other things. Add client
driver to handle it. The driver currently only provides a basic support
omitting a

input: Add onkey driver for Marvell 88PM886 PMIC

Marvell 88PM886 PMIC provides onkey among other things. Add client
driver to handle it. The driver currently only provides a basic support
omitting additional functions found in the vendor version, such as long
onkey and GPIO integration.

Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240531175109.15599-5-balejk@matfyz.cz
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Input: cs40l50 - Add support for the CS40L50 haptic driver

Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.

The i

Input: cs40l50 - Add support for the CS40L50 haptic driver

Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.

The input driver provides the interface for control of
haptic effects through the device.

Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240620161745.2312359-5-jogletre@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Merge tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- a new driver for Azoteq IQS7210A/7211A/E touch controllers

-

Merge tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- a new driver for Azoteq IQS7210A/7211A/E touch controllers

- support for Azoteq IQS7222D variant added to iqs7222 driver

- support for touch keys functionality added to Melfas MMS114 driver

- new hardware IDs added to exc3000 and Goodix drivers

- xpad driver gained support for GameSir T4 Kaleid Controller

- a fix for xpad driver to properly support some third-party
controllers that need a magic packet to start properly

- a fix for psmouse driver to more reliably switch to RMI4 mode on
devices that use native RMI4/SMbus protocol

- a quirk for i8042 for TUXEDO Gemini 17 Gen1/Clevo PD70PN laptops

- multiple drivers have been updated to make use of devm and other
newer APIs such as dev_err_probe(), devm_regulator_get_enable(), and
others.

* tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (83 commits)
Input: goodix - add support for ACPI ID GDX9110
Input: rpckbd - fix the return value handle for platform_get_irq()
Input: tca6416-keypad - switch to using input core's polling features
Input: tca6416-keypad - convert to use devm_* api
Input: tca6416-keypad - fix interrupt enable disbalance
Input: tca6416-keypad - rely on I2C core to set up suspend/resume
Input: tca6416-keypad - always expect proper IRQ number in i2c client
Input: lm8323 - convert to use devm_* api
Input: lm8323 - rely on device core to create kp_disable attribute
Input: qt2160 - convert to use devm_* api
Input: qt2160 - do not hard code interrupt trigger
Input: qt2160 - switch to using threaded interrupt handler
Input: qt2160 - tweak check for i2c adapter functionality
Input: psmouse - add delay when deactivating for SMBus mode
Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe()
Input: qt1070 - convert to use devm_* api
Input: mcs-touchkey - convert to use devm_* api
Input: amikbd - convert to use devm_* api
Input: lm8333 - convert to use devm_* api
Input: mms114 - add support for touch keys
...

show more ...

Input: iqs7222 - add support for Azoteq IQS7222D

The vendor has introduced a new variant of silicon which is highly
similar to the existing IQS7222A, but with its independent sliders
essentially rep

Input: iqs7222 - add support for Azoteq IQS7222D

The vendor has introduced a new variant of silicon which is highly
similar to the existing IQS7222A, but with its independent sliders
essentially replaced with a single-contact trackpad.

Update the common driver to support this new device's register map
and report trackpad events. As with the IQS7222A, the new IQS7222D
can report both raw coordinates as well as gestures.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZKrpRh6RT6+6KrMQ@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

mfd: rk808: Split into core and i2c

Split rk808 into a core and an i2c part in preparation for
SPI support.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik

mfd: rk808: Split into core and i2c

Split rk808 into a core and an i2c part in preparation for
SPI support.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B
Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>

show more ...

Input: bbnsm_pwrkey - add bbnsm power key support

The ON/OFF logic inside the BBNSM allows for connecting directly
into a PMIC or other voltage regulator device. The module has an
button input signa

Input: bbnsm_pwrkey - add bbnsm power key support

The ON/OFF logic inside the BBNSM allows for connecting directly
into a PMIC or other voltage regulator device. The module has an
button input signal and a wakeup request input signal. It also
has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an
active-low PMIC enable (pmic_en_b) output.

Add the power key support for the ON/OFF button function found in
BBNSM module.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230215024117.3357341-2-ping.bai@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Merge tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Ampere Computing SMpro
- Add support for TI

Merge tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC

New Functionality:
- Add support for multiple devices of the same type; rk808

Fix-ups:
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*

Bug Fixes:
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008"

* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
dt-bindings: mfd: da9062: Correct file name for watchdog
mfd: pm8008: Fix return value check in pm8008_probe()
mfd: rohm: Use dev_err_probe()
mfd: Drop obsolete dependencies on COMPILE_TEST
dt-bindings: mfd: da9062: Move IRQ to optional properties
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
mfd: rohm-bd9576: Convert to i2c's .probe_new()
mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
dt-bindings: Fix maintainer email for a few ROHM ICs
mfd: palmas: Use device_get_match_data() to simplify the code
Input: Add tps65219 interrupt driven powerbutton
mfd: tps65219: Add driver for TI TPS65219 PMIC
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: wcd934x: Convert irq chip to config regs
mfd: tps65090: Replace irqchip mask_invert with unmask_base
mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
mfd: stpmic1: Fix swapped mask/unmask in irq chip
mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
...

show more ...

Input: Add tps65219 interrupt driven powerbutton

TPS65219 has different interrupts compared to other TPS6521* chips.
TPS65219 defines two interrupts for the powerbutton one for push and one
for rele

Input: Add tps65219 interrupt driven powerbutton

TPS65219 has different interrupts compared to other TPS6521* chips.
TPS65219 defines two interrupts for the powerbutton one for push and one
for release.

This driver is very simple in that it maps the push interrupt to a key
input and the release interrupt to a key release.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221104152311.1098603-6-jneanne@baylibre.com

show more ...

mfd: Remove dm355evm_msp driver

The DaVinci DM355EVM platform is gone after the removal of all
unused board files, so the MTD device along with its sub-devices
can be removed as well.

Signed-off-by

mfd: Remove dm355evm_msp driver

The DaVinci DM355EVM platform is gone after the removal of all
unused board files, so the MTD device along with its sub-devices
can be removed as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221019152947.3857217-7-arnd@kernel.org

show more ...

Input: wistron_btns - disable on UML

The wistron_btns driver calls rtc_cmos_read(), which isn't
available with UML builds, so disable this driver on UML.

Prevents this build error:

ld: drivers/inp

Input: wistron_btns - disable on UML

The wistron_btns driver calls rtc_cmos_read(), which isn't
available with UML builds, so disable this driver on UML.

Prevents this build error:

ld: drivers/input/misc/wistron_btns.o: in function `poll_bios':
wistron_btns.c:(.text+0x4be): undefined reference to `rtc_cmos_read'

Fixes: 0bbadafdc49d ("um: allow disabling NO_IOMEM") # v5.14+
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20221130161604.1879-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: atmel_captouch - drop obsolete dependency on COMPILE_TEST

Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any

Input: atmel_captouch - drop obsolete dependency on COMPILE_TEST

Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.

It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.

As a matter of fact, dropping the alternative dependency on
COMPILE_TEST allows removing preprocessor directives, which will
speed up the build.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221004102606.5d49e5d7@endymion.delvare
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: rt5120 - add power key support

Add RT5120 PMIC power key support.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1660100142-32493-4-git-send-email-u00845

Input: rt5120 - add power key support

Add RT5120 PMIC power key support.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1660100142-32493-4-git-send-email-u0084500@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: Add IBM Operation Panel driver

Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bu

Input: Add IBM Operation Panel driver

Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bus, so the driver registers
as an I2C slave device.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C slave parts
Link: https://lore.kernel.org/r/20220809204147.238132-3-eajames@linux.ibm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: add support for Azoteq IQS7222A/B/C

This patch adds support for the Azoteq IQS7222A/B/C family of
capacitive touch controllers.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://l

Input: add support for Azoteq IQS7222A/B/C

This patch adds support for the Azoteq IQS7222A/B/C family of
capacitive touch controllers.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220403221659.865997-3-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Input: remove dead CSR Prima2 PWRC driver

Commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms") removes
the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig.

Hence, since then, the corr

Input: remove dead CSR Prima2 PWRC driver

Commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms") removes
the config ARCH_SIRF in ./arch/arm/mach-prima2/Kconfig.

Hence, since then, the corresponding CSR Prima2 PWRC Driver is dead code.
Remove this dead driver.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210817072842.8640-1-lukas.bulwahn@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...