Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.17-rc1. Begins a new release
cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge commit '6e64f4580381e32c06ee146ca807c555b8f73e24' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Merge tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- updates to several drivers consuming GPIO APIs to use setters

Merge tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- updates to several drivers consuming GPIO APIs to use setters
returning error codes

- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver

- an update to AT/PS2 keyboard driver to map F13-F24 by default

- Samsung keypad driver got a facelift

- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info

- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver

- support for polling mode in Goodix touchscreen driver

- support for support for FocalTech FT8716 in edt-ft5x06 driver

- support for MT6359 in mtk-pmic-keys driver

- removal of pcf50633-input driver since platform it was used on is
gone

- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers

- a new definition for "performance" key

* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Input: touch-overlay - add touchscreen overlay handling

Some touch devices provide mechanical overlays with different objects
like buttons or clipped touchscreen surfaces.

In order to support these

Input: touch-overlay - add touchscreen overlay handling

Some touch devices provide mechanical overlays with different objects
like buttons or clipped touchscreen surfaces.

In order to support these objects, add a series of helper functions
to the input subsystem to transform them into overlay objects via
device tree nodes.

These overlay objects consume the raw touch events and report the
expected input events depending on the object properties.

Note that the current implementation allows for multiple definitions
of touchscreen areas (regions that report touch events), but only the
first one will be used for the touchscreen device that the consumers
typically provide.
Should the need for multiple touchscreen areas arise, additional
touchscreen devices would be required at the consumer side.
There is no limitation in the number of touch areas defined as buttons.

Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-2-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.14-rc1' into perf-tools-next

To get the various fixes in the current master.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge drm/drm-next into drm-xe-next

Sync to fix conlicts between drm-xe-next and drm-intel-next.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Merge drm/drm-next into drm-misc-next

Bring rc1 to start the new release dev.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync with v6.14-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'for-6.15/amd_sfh' into for-linus

From: Mario Limonciello <mario.limonciello@amd.com>

Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detecte

Merge branch 'for-6.15/amd_sfh' into for-linus

From: Mario Limonciello <mario.limonciello@amd.com>

Some platforms include a human presence detection (HPD) sensor. When
enabled and a user is detected a wake event will be emitted from the
sensor fusion hub that software can react to.

Example use cases are "wake from suspend on approach" or to "lock
when leaving".

This is currently enabled by default on supported systems, but users
can't control it. This essentially means that wake on approach is
enabled which is a really surprising behavior to users that don't
expect it.

Instead of defaulting to enabled add a sysfs knob that users can
use to enable the feature if desirable and set it to disabled by
default.

show more ...

Merge tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- more conversions to the guard notation in the input core

-

Merge tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- more conversions to the guard notation in the input core

- a fix for NXP BBNSM power key driver to clean up wake IRQ after
unbinding

- several new vendor/device ID pairs added to xpad game controller
driver

- several drivers switched to using str_enable_disable and similar
helpers instead of open-coding

- add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut
works out of the box (if userspace is ready to handle it)

- evbug input handler has been removed (debugging through evdev is
strongly preferred to dumping all events into the kernel log).

* tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits)
Input: synaptics - fix crash when enabling pass-through port
Input: atkbd - map F23 key to support default copilot shortcut
Input: xpad - add support for Nacon Evol-X Xbox One Controller
Input: xpad - add unofficial Xbox 360 wireless receiver clone
Input: xpad - add support for wooting two he (arm)
Input: xpad - improve name of 8BitDo controller 2dc8:3106
Input: xpad - add QH Electronics VID/PID
Input: joystick - use str_off_on() helper in sw_connect()
Input: Use str_enable_disable-like helpers
Input: use guard notation in input core
Input: poller - convert locking to guard notation
Input: mt - make use of __free() cleanup facility
Input: mt - convert locking to guard notation
Input: ff-memless - make use of __free() cleanup facility
Input: ff-memless - convert locking to guard notation
Input: ff-core - make use of __free() cleanup facility
Input: ff-core - convert locking to guard notation
Input: remove evbug driver
Input: mma8450 - add chip ID check in probe
Input: bbnsm_pwrkey - add remove hook
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Input: remove evbug driver

I've never heard of anyone having used this driver for debugging at least
in over past decade or so. Since we have tools like evtest, this driver
seems to be rather superf

Input: remove evbug driver

I've never heard of anyone having used this driver for debugging at least
in over past decade or so. Since we have tools like evtest, this driver
seems to be rather superficial.

Also, it apparently causes confusion among people who accidentaly enable
CONFIG_INPUT_EVBUG and are annoyed/confused by their kernel log being
spammed by a lot of useless data.

Let's just remove it.

Signed-off-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/8n377s5p-3r9n-ro38-3r2o-p536745552qo@xreary.bet
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

show more ...

Merge branch 'for-6.5/apple' into for-linus

- improved support for Keychron K8 keyboard (Lasse Brun)

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'input-for-v6.4-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- a new driver for Novatek touch controllers

- a new driver fo

Merge tag 'input-for-v6.4-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- a new driver for Novatek touch controllers

- a new driver for power button for NXP BBNSM

- a skeleton KUnit tests for the input core

- improvements to Xpad game controller driver to support more devices

- improvements to edt-ft5x06, hideep and other drivers

* tag 'input-for-v6.4-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits)
Revert "Input: xpad - fix support for some third-party controllers"
dt-bindings: input: pwm-beeper: convert to dt schema
Input: xpad - fix PowerA EnWired Controller guide button
Input: xpad - add constants for GIP interface numbers
Input: synaptics-rmi4 - fix function name in kerneldoc
Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe
Input: edt-ft5x06 - select REGMAP_I2C
Input: melfas_mip4 - report palm touches
Input: cma3000_d0x - remove unneeded code
Input: edt-ft5x06 - calculate points data length only once
Input: edt-ft5x06 - unify the crc check
Input: edt-ft5x06 - convert to use regmap API
Input: edt-ft5x06 - don't print error messages with dev_dbg()
Input: edt-ft5x06 - remove code duplication
Input: edt-ft5x06 - don't recalculate the CRC
Input: edt-ft5x06 - add spaces to ensure format specification
Input: edt-ft5x06 - remove unnecessary blank lines
Input: edt-ft5x06 - fix indentation
Input: tsc2007 - enable cansleep pendown GPIO
Input: Add KUnit tests for some of the input core helper functions
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.