Merge tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small

Merge tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.

Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:

- IIO driver updates and additions

- GPIB driver bugfixes and cleanups

- Android binder driver updates (rust and C version)

- counter driver updates

- MHI driver updates

- mei driver updates

- w1 driver updates

- interconnect driver updates

- Comedi driver fixes and updates

- some obsolete char drivers removed (applicom and dtlk)

- hwtracing driver updates

- other tiny driver updates

All of these have been in linux-next for a while with no reported
issues"

* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...

show more ...

Merge tag 'iio-for-7.2a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-testing

IIO: New device support, features and cleanup for the 7.2 cycle.

Like many areas of the ke

Merge tag 'iio-for-7.2a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-testing

IIO: New device support, features and cleanup for the 7.2 cycle.

Like many areas of the kernel IIO has seen a lot of new contributors
though in this case that is not all AI driven, but also reflects and annual
surge of student contributions from usp.br. We also have several new
regular reviewers who are helping with the surge (thanks to all our
active reviewers!)

Given there was a lot of cases of similar improvements applied to
different drivers, I have grouped those into a special section (various
drivers) to avoid mass duplication.

New device support
------------------

adi,ad4130
- Add support for AD4129-4, AD4129-8, AD4130-4, AD4131-4 and AD4131-8
after reworking the driver to be suitable for multiple device support.
adi,ad4080
- Support the AD4880 and AD4884 dual-channel parts. Interesting parts
as have two separate data pipelines (including SPI buses interfaces),
but the only current backend IP combines the two so they cannot be
treated as independent devices.
adi,ad5706r
- New driver for this 4 channel current output DAC.
adi,ad4691
- New driver supporting this family of ADCs. Support for AD4691, AD4692,
AD4693 and AD4694 which support either 8 or 16 channels with different
max sampling rates. Feature rich driver including SPI offload support.
adi,ltc2983
- Add support for the ADT7604 in which the same sensor die as the
LTC2984 is used for leak detection (liquid coverage of a sense area).
allwinner,adc
- Support for A523 SoCs. Similar to existing parts but with an additional
clock. Includes adding support for non contiguous channel lookup
for in kernel use (fwnode_xlate callback).
broadcomm,apds9999
- New driver for the APDS9999 Ambient Light, RGB and proximity sensor.
memsic,mmc5983
- New driver for this 3-axis magnetometer.
taos,tsl2772
- Add support for the AVAGO APDS9900 and APDS9901 Ambient Light and
Proximity sensors. which are very similar to existing part with slightly
different integration time choices. Includes removal of driver for these
parts from drivers/misc.
vishay,veml3328
- New driver for this RGB+IR light sensor.

Features
--------

IIO Core
- Support for IEEE 754 floating point values in buffer scan elements.
- Support quaternion axis representation (missing the scaler part)
microchip,mcp4821
- Add configurable gain control
qcom,pm8xxx-xoadc
- Add per channel labels.
st,lsm6dsx
- Support for rotation sensing on the LSM6DSV and LSM6DSV16X using
both floating point and new quaterionaxis rotation modifier.

MAINTAINERS update
------------------

IIO top level entry
- Include Documentation/driver-api/iio/
adi,*
- Top level ADI entry maintainer switch from Lars-Peter Clausen to Nuno Sá
reflecting what has been the reality for some time. Thanks to Lars-Peter
who was very active for many years, but has moved on to other things.
Also add the linux@analog.com email list to ensure we don't get a gap
in future.
- Maintainer updates to reflect Cosmin Tanislav having moved on - thanks
to Marcelo Schmitt for taking these over.
sensiron,scd30
- Replace maintainer (Tomasz Duszynski) with Maxwell Doose.

Cleanups, minor fixes and hardening.
------------------------------------

Documentation
- Add missing powerdown modes to ABI docs.
- Use modern helpers for buffer definition in the examples.
core
- Rework of the handling of timestamps so that the offset is cached at
buffer resize time (during enabling) rather than based on assumption
that relied in the timestamp being last and the largest element and
so always 8 bytes before end of the scan. Underlying problem was
triggered by scans with repeated type elements such as quaternions
with each element more than 2 bytes - Giving a 16 byte+ aligned channel
with result that a following timestamp may be 16 bytes from end of scan,
rather than 8. Note that for the bosch,bno55 a compatibility hack means
that it will duplicate the timestamp putting a second copy at previously
incorrect location.
- Tidy up use of kernel types in buffer code to not use int64_t given all
calls use s64.
various drivers
- Drop unused driver_data in device id tables - includes cleanup of various
drivers that had only one choice where it can be hard coded elsewhere.
- Move to named initializers for many i2c_device_id and platform_device_id
tables (I have no idea how we go into habit of using named initializers
for only a subset of the table types - e.g. of_device_id).
- Make IIO_CHAN_SOFT_TIMESTAMP() macro a compound literal allowing simple
use in various drivers that do dynamic channel definitions. Use it in
all such cases.
- Use dev_err_probe() and local dev variables to tidy up older drivers.
- Switch more drivers to devm_mutex_init() to provide minor debug benefits.
- Reorder code to put MODULE_DEVICE_TABLE() next to the tables.
- Lots of use of cleanup.h magic to improve code flow, often including
related refactors such as introducing helpers.
- Replacement of usleep_range() with fsleep()
- Reduce logging noise where functions either provide their own extensive
reports on error, or where a clear error code is returned to userspace.
- Minor spelling and style fixes (improving bracket usage, not using
__packed etc)
hid-sensors-*
- Drop helpers for setting channel bit masks in favor of a compound
literal at the call site. Also general cleanup of surrounding code.
hid-sensors-magn
- Use u32 rather than bare unsigned for types.
hid-sensors-rotation
- Make sue of ext_scan_type handling for static case rather than duplicate
chan_info structures.
adi,ad3552r
- Use field_get() to replace open coded equivalent.
adi,ad4170
- Switch from switch to table lookup for GPIO modes.
adi,ad5686
- Apply IWYU principal to included a consistent set of headers.
- Deduplicate regmaps for AD5684 and AD5693 as identical.
- Switch from an enum value in driver data and array look up to pointers
to separate structures, improving readabilty and avoiding issues with
0 value when using helpers to deal with different firmware types.
- Add of_match_id table to SPI driver rather than relying on fallback to
spi_device_id table.
- Introduce some helpers for powerdown mask control.
- Add helpers for control sync simplifying a couple of corner cases.
- Docs fixes.
- Add an ops structure to simplify future addition of operations beyond
read and write.
adi,ad7191
- Switch to best practice of using device_property_present() to detect
if an optional property is there rather than error values on querying
the property.
adi,ad7280a
- Use local variables to improve readability of breaking up chan-address.
adi,ad7825
- Cleanup a type mismatch in clamp() call.
adi,ad799x
- Include improvements
- Local dev variable to shorten code lines.
- Cache regulator voltage at probe (these never change in practice)
- Convert to devm for all unwind handling.
adi,ad9832
- Improve include relevance including replacing kernel.h with more specific
headers.
- Simplify some maths.
adi,ad9834
- Improve include relevance including replacing kernel.h with more specific
headers.
adi,adt7316
- Add a comment to avoid future 'fixes' for error handling during the
odd sequence used to flip from I2C mode to SPI mode.
adi,adxl*
- Documentation consistency improvements.
asahi-kasei,ak8975
- Fix missing runtime pm calls for buffered capture.
- Fix missing pm_runtime_put_autosuspend() in an error path that would leave
the device stuck on.
- Close a potential uninitialized kernel stack leak.
- Extensive driver modernization including: header relevance, fsleep()
various minor bugs, dropping duplicate error messages and avoiding
magic lengths for buffers.
- Replace opencoded polling with iopoll().
- Add error checking to gpio reads.
avia,hx711
- Move scale computation from global data to per device avoiding problems
if multiple devices present.
- General binding text cleanup.
bosch,bmg160
- Add missing mount-matrix entry to binding.
bosch,bno55
- Terminate error strings with newlines.
devantech,srf08
- Replace sprintf() with sysfs_emit() and sysfs_emit_at() to make intent
clearer.
freescale,mma8452
- Add missing return value check.
- Fix potential probe ordering issue by switching to non devm irq request.
linear,ltc2309
- Add chip specific read delays.
- Improve chip_info structure, adding __counted_by_ptr marking and
reorganizing to improve packing.
linear,ltc2983
- Fix a firmware combination where default n_wires of 2 bypasses exclusion
of adi,current-rotate whereas explicitly setting it to 2 does not.
- Fix potential race with completion reinit.
- Improve error message wording consistency.
- Use fwnode_property_present() to detect optional properties rather
than fragile return value checking.
microchip,mcp3422
- Use of GENMASK(), FIELD_GET(), FIELD_PREP() to improve readability and
generally modernize driver.
microchip,mcp47feb02
- Fix binding example to use a possible I2C address.
- Fix binding bounds on channel number.
- Standardize binding example indentation
nxp,saradc
- Increase chances of recovering from a failure in the interrupt handler
by notifying the trigger that it can reenable even when the read failed.
- Use field_get() to replace opencoded equivalent.
qualcomm,*
- Standardize on Qualcomm company naming in Kconfig.
richtek,rtq6056
- Add i2c_device_id table for legacy instantiation.
samsung,ssp
- Replace custom timestamp channel macro with main one.
sciosense,ens210
- Now scoped_guard() has been reworked, no need for a return
that can never be reached.
sensiron,scd30
- Constify command lookup table.
- Sanity check for NULL buffer of non zero size being provided to
sc30_i2c_command()
sensortek,stk3310
- Include more appropriate headers.
- Ensure interrupt in appropriate mode after resume.
- Structure definition improvements.
- Use size_of() to replace opencoded sizes.
siliconimage,si1133
- Resolve counter related issues on timeout error paths.
- Unused macro removal, improved macro definitions,.
- Include relevance improvements.
st,lsm6dsx
- Fix an issue with applying invalid data check to wrong type of sample.
taos,tcs3472
- Try to powerdown chip on probe failure.
- Devm usage and dropping of remove() callback.
- Various other minor cleanup.
taos,tsl2591
- Dead code removal.
- Simplify tsl2591_persist functions using a look up table.
ti,ads1298
- Fix wrong comment on timeout (and minor code improvement)
- Drop unnecessary CONFIG2 write during init.
ti,ads7950
- Check ret rather that ret < 0 for spi_setup() call.
- Use fully devm managed resources including moving to
devm_regulator_get_enable_read_voltage() at probe time rather than
querying evey time.
- Using spi_optimize_message() to reduce CPU usage.
ti,ads8688
- User read_avail() callback rather than open coding handling of
available attributes.
ti,opt3001
- Header relevance improvements
- Use GENMASK for field definitions to improve readability.
vishay,vcnl4000
- Switch from enum in device_data to individual names structures
impmroving code readabililty.
- Move to devm handling for remainder of probe.
vishay,veml6030
- Drop pointless read of current Iteration Time index as it is not used.
xilinx,ams
- Fix potential out of bound channel lookup.
- Replace some large switch statements with table lookups.
yamaha,yas530
- Put label in chip info structure to avoid look up in i2c_device_id table.

Drop
----

iio-trig-interrupt.
- Not used for some time and no support for modern firmware bindings or
in kernel users. So drop it.

* tag 'iio-for-7.2a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (266 commits)
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
docs: iio: adc: ad4691: add driver documentation
iio: adc: ad4691: add oversampling support
iio: adc: ad4691: add SPI offload support
iio: adc: ad4691: add triggered buffer support
iio: adc: ad4691: add initial driver for AD4691 family
dt-bindings: iio: adc: add AD4691 family
...

show more ...

iio: Initialize i2c_device_id arrays using member names

While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without hav

iio: Initialize i2c_device_id arrays using member names

While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.

The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.

This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.

Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Siratul Islam <email@sirat.me>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required fo

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required for the next UBWC
patches.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'timers-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Added the DT bindings for the compatible string 'fsl,imx25-epit'
(Fr

Merge tag 'timers-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Added the DT bindings for the compatible string 'fsl,imx25-epit'
(Frank Li)

- Made the rttm_cs variable static for the rtl otto timer driver
(Krzysztof Kozlowski)

- Fixed error return code handling in the sun5i timer driver (Chen Ni)

- Made the timer-of and the mmio code compatible with modules (Daniel
Lezcano)

Link: https://lore.kernel.org/151feae1-39ba-4abd-a9f9-9bff377a2cd8@oss.qualcomm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device (Lucas Zampieri)

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf before 7.0-rc1

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other small

Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:

- Loads of iio driver changes and updates and additions

- gpib driver updates

- interconnect driver updates

- i3c driver updates

- hwtracing (coresight and intel) driver updates

- deletion of the obsolete mwave driver

- binder driver updates (rust and c versions)

- mhi driver updates (causing a merge conflict, see below)

- mei driver updates

- fsi driver updates

- eeprom driver updates

- lots of other small char and misc driver updates and cleanups

All of these have been in linux-next for a while, with no reported
issues"

* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...

show more ...

Merge tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features and cleanup for the 6.20/7.0 cycle.

Merge tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features and cleanup for the 6.20/7.0 cycle.

Slightly messier than normal unfortunately due to some conflicts
and build config bugs related to I3C drivers.

One last minute Kconfig fix right at the top after a linux-next report.
I've simplified the Kconfig and made it match other instances in the kernel
so that should be safe enough despite short soak time in front of build bots.

Merge of an immutable branch from I3C to get some stubs that were missing
and caused build issues with dual I2C / I3C drivers. This also brought in a
drop of some deprecated interfaces so there is also one patch to update a
new driver to not use those.

We are having another go at using cleanup.h magic with the IIO mode claim
functions after backing out last try at this. This time we have wrappers
around the new ACQUIRE() and ACQUIRE_ERR() macros.
Having been burnt once, we will be taking it a bit more slowly this time
wrt to wide adoption of these! Thanks in particular to Kurt for taking
on this core IIO work.

New Device Support
==================

adi,ad18113
- New driver to support the AD18113 amplifier - an interesting device due
to the external bypass paths where we need to describe what gain those
paths have in DT. Longer term it will be interesting to see if this
simplistic description is enough for real deployments.
adi,ad4062
- New driver for the AD4060 and AD4052 SAR ADCs including trigger, event
and GPIO controller support. Follow up patch replaced use of some
deprecated I3C interfaces prior to the I3C immutable branch merge as
that includes dropping them.
adi,ad4134
- New driver for the AD4134 24bit 4 channel simultaneous sampling ADC.
adi,ad7768-1,
- Add support for the ADAQ767-1, ADAQ7768-1 and ADAQ7769-1 ADCs after some
rework to enable the driver to support multiple device types.
adi,ad9467
- Add support for the similar ad9211 ADC to this existing driver.
- Make the selection of 2s comp mode explicit for normal operation and
switch to offset binary when entering calibration mode.
honeywell,abp2
- New driver to support this huge family (100+) of board mount pressure and
temperature sensors.
maxim,max22007
- New drier for this 4 channel DAC.
memsic,mmc5633
- New driver for this I2C/I3C magnetometer. Follow on patches fixed up
issues related to single driver supporting both bus types.
microchip,mcp747feb02
- New driver for the Microchip MCP47F(E/V)B(0/1/2)1,
MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8
buffered voltage output DACs.
nxp,sar-adc
- New driver support ADCs found on s32g2 and s32g3 platforms.
ti,ads1018
- New drier for the ADS1018 and ADS1118 SPI ADCs.
ti,ads131m02
- New driver supporting ADS131M(02/03/04/06/08)24-bit simultaneous sampling
ADCs.

Features
========

iio-core
- New IIO_DEV_ACQUIRE_DIRECT_MODE() / IIO_DEV_ACQUIRE_FAILED() +
equivalents for the much rarer case where the mode needs pinning
whether or not it is in direct mode. These use the ACQUIRE()
/ ACQUIRE_ERR() infrastructure underneath to provide both simple
checks on whether we got the requested mode and to provide scope
based release. Applied in a few initial drivers.
adi,ad9467
- Support calibbias control
adi,adf4377
- Add support to act as a clock provider.
adi,adxl380
- Support low power 1KHz sampling frequency mode. Required rework of
how events and filters were configured, plus applying of constraints
when in this mode.
rf-digital,rfd77402
- Add interrupt support as alternative to polling for completion.
st,lsm6dsx
- Tap event detection (after considerable driver rework)

Cleanup and Minor Fixes
=======================

More minor cleanup such as typos, white space etc not called out except
where they were applied to a lot of drivers.

Various drivers.
- Use of dev_err_probe() to cleanup error handling.
- Introduce local struct device and struct device_node variables to
reduce duplication of getting them from containing structs.
- Ensure uses of iio_trigger_generic_data_rdy_poll() set IRQF_NO_THREAD
as that function calls non threaded child interrupt handlers.
- Replace IRQF_ONESHOT in not thread interrupt handlers with
IRQF_NO_THREAD to ensure they run as intended. Drop one unnecessary case.
iio-sw-device/trigger.
- Constify configs_group_operations structures.
iio-buffer-dma / buffer-dma-engine
- Use lockdep_assert_held() to replace WARN_ON() to check lock is
correctly held.
- Make use of cleanup.h magic to simplify various code paths.
- Make iio_dma_buffer_init() return void rather than always success.

adi,ad7766
- Replace custom interrupt handler with iio_trigger_generic_data_rdy_poll()
adi,ad9832
- Drop legacy platform_data support.
adi,ade9000
- Add a maintainer entry.
adi,adt7316
- Move to EXPORT_GPL_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() so the compiler
can cleanly drop unused pm structures and callbacks.
adi,adxl345
- Relax build constraint vs the driver that is in input so both may be
built as modules and selection made at runtime.
adi,adxl380
- Make sure we don't read tail entries in the hardware fifo if a partial
new scan has been written.
- Move to a single larger regmap_noinc_read() to read the hardware fifo.
aspeed,ast2600
- Add missing interrupts property to DT binding.
bosch,bmi270_i2c
- Add missing MODULE_DEVICE_TABLE() macros so auto probing of modules can
work.
bosch,smi330
- Drop duplicate assignment of IIO_TYPE in smi330_read_avail()
- Use new common field_get() and field_prep() helpers to replace local
version.
honeywell,mprls0025pa
Fixes delayed to merge window as late in cycle and we didn't want to delay
the rest of the series.
- Allow Kconfig selection of specific bus sub-drivers rather than tying that
to the buses themselves being supported.
- Zero spi_transfer structure to avoid chance of unintentionally set fields
effecting transfer.
- Fix a potential timing violation wrt to the chip select to first clock
edge timing.
- As recent driver, take risk inherent in dropping interrupt direction from
driver as that should be set by firmware.
- Fix wrong reported number of data bits for channel.
- Fix a pressure channel calculation bug.
- Rework to allow embedding the tx buffer in the iio_priv() structure rather
than requiring separate allocation.
- Move the buffer clearing to the shared core bringing it into affect for
SPI as well as I2C.
- Stricter checks for status byte.
- Greatly simplify the measurement sequence.
- Add a copyright entry to reflect Petre's continued work on this driver.
intersil,isl29018
- Switch from spritnf to sysfs_emit_at() to make it clear overflow can't
occur.
invensense,icm42600
- Allow sysfs access to temperature when buffered capture in use as it
does not impact other sensor data paths.
invensense,itg3200
- Check unused return value in read_raw() callback.
men,z188
- Drop now duplicated module alias.
rf-digital,rfd77402
- Add DT binding doc and explicit of_device_id table.
- Poll for timeout with times as on datasheet, then replace opencoded
version with read_poll_timeout().
sensiron,scd4x
- Add missing timestamp channel. The code to push it to the buffer was there
but there was no way to turn it on.
vti,sca3000
- Fix resource leak if iio_device_register() fails.

* tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (144 commits)
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
iio: Replace IRQF_ONESHOT with IRQF_NO_THREAD
iio: Use IRQF_NO_THREAD
iio: dac: Add MAX22007 DAC driver support
dt-bindings: iio: dac: Add max22007
...

show more ...

iio: light: opt4060: Use IIO cleanup helpers

Use IIO_DEV_GUARD_CURRENT_MODE() cleanup helper to simplify and drop
busy-waiting code in opt4060_set_driver_state().

Reviewed-by: David Lechner <dlechn

iio: light: opt4060: Use IIO cleanup helpers

Use IIO_DEV_GUARD_CURRENT_MODE() cleanup helper to simplify and drop
busy-waiting code in opt4060_set_driver_state().

Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: core: Match iio_device_claim_*() semantics and implementation

Implement iio_device_claim_buffer_mode() fully inline with the use of
__iio_dev_mode_lock(), which takes care of sparse annotations

iio: core: Match iio_device_claim_*() semantics and implementation

Implement iio_device_claim_buffer_mode() fully inline with the use of
__iio_dev_mode_lock(), which takes care of sparse annotations.

To completely match iio_device_claim_direct() semantics, we need to
also change iio_device_claim_buffer_mode() return semantics to usual
true/false conditional lock semantics.

Additionally, to avoid silently breaking out-of-tree drivers, rename
iio_device_claim_buffer_mode() to iio_device_claim_try_buffer_mode().

Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge branch 'for-6.19/nintendo' into for-linus

- switch to WQ_PERCPU workaueues (Marco Crivellari)
- reduce potential initialization blocking time of hid-nintendo (Willy Huang)

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>