iio: light: veml3328: add support for new device

Add support for the Vishay VEML3328 RGB/IR light sensor communicating
via I2C (SMBus compatible).

Also add a new entry for said driver into Kconfig

iio: light: veml3328: add support for new device

Add support for the Vishay VEML3328 RGB/IR light sensor communicating
via I2C (SMBus compatible).

Also add a new entry for said driver into Kconfig and Makefile.

Assisted-by: Gemini:3.1-Pro
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: light: add support for APDS9999 sensor

Add IIO driver for Broadcom APDS9999 ambient light sensor.

The APDS9999 is a digital proximity and RGB sensor with ALS
capability. The driver implements

iio: light: add support for APDS9999 sensor

Add IIO driver for Broadcom APDS9999 ambient light sensor.

The APDS9999 is a digital proximity and RGB sensor with ALS
capability. The driver implements the ALS/Lux functionality
using the green channel, which uses optical coating technology
to approximate the human eye spectral response.

Raw IIO_INTENSITY channels are exposed for red, green, blue,
and IR so userspace can compute its own weighted lux.
Proximity (PS) support is not yet implemented.

Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: light: add support for veml6046x00 RGBIR color sensor

Add Vishay VEML6046X00 high accuracy RGBIR color sensor.

This sensor provides three colour (red, green and blue) as well as one
infrared (

iio: light: add support for veml6046x00 RGBIR color sensor

Add Vishay VEML6046X00 high accuracy RGBIR color sensor.

This sensor provides three colour (red, green and blue) as well as one
infrared (IR) channel through I2C.

Support direct and buffered mode.

An optional interrupt for signaling green colour threshold underflow or
overflow is not supported so far.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Link: https://patch.msgid.link/20250728075447.338725-3-ak@it-klinger.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: Add support for AL3000a illuminance sensor

AL3000a is a simple I2C-based ambient light sensor, which is
closely related to AL3010 and AL3320a, but has significantly
different way of proc

iio: light: Add support for AL3000a illuminance sensor

AL3000a is a simple I2C-based ambient light sensor, which is
closely related to AL3010 and AL3320a, but has significantly
different way of processing data generated by the sensor.

Tested-by: Robert Eckelmann <longnoserob@gmail.com>
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250217140336.107476-3-clamor95@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: Add APDS9160 ALS & Proximity sensor driver

APDS9160 is a combination of ALS and proximity sensors.

This patch add supports for:
- Intensity clear data and illuminance data
- Pro

iio: light: Add APDS9160 ALS & Proximity sensor driver

APDS9160 is a combination of ALS and proximity sensors.

This patch add supports for:
- Intensity clear data and illuminance data
- Proximity data
- Gain control, rate control
- Event thresholds

Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com>
Link: https://patch.msgid.link/20250122-apds9160-driver-v5-2-5393be10279a@dimonoff.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: Add support for TI OPT4060 color sensor

Add support for Texas Instruments OPT4060 RGBW Color sensor.

Signed-off-by: Per-Daniel Olsson <perdaniel.olsson@axis.com>
Link: https://patch.msg

iio: light: Add support for TI OPT4060 color sensor

Add support for Texas Instruments OPT4060 RGBW Color sensor.

Signed-off-by: Per-Daniel Olsson <perdaniel.olsson@axis.com>
Link: https://patch.msgid.link/20241218104836.2784523-3-perdaniel.olsson@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: Drop BU27008 and BU27010

The ROHM BU27008 and BU27010 RGB sensors got cancelled. I was informed
they never reached mass production stage.

Keeping the drivers around is waste of maintena

iio: light: Drop BU27008 and BU27010

The ROHM BU27008 and BU27010 RGB sensors got cancelled. I was informed
they never reached mass production stage.

Keeping the drivers around is waste of maintenance resources. Drop the
drivers.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/f4d0aa31f29f160a06cba4856a034fa5636d3372.1732819203.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: add support for veml3235

The Vishay veml3235 is a low-power ambient light sensor with I2C
interface. It provides a minimum detectable intensity of
0.0021 lx/cnt, configurable integration

iio: light: add support for veml3235

The Vishay veml3235 is a low-power ambient light sensor with I2C
interface. It provides a minimum detectable intensity of
0.0021 lx/cnt, configurable integration time and gain, and an additional
white channel to distinguish between different light sources.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241023-veml3235-v3-2-8490f2622f9a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: ROHM BH1745 colour sensor

Add support for BH1745, which is an I2C colour sensor with red, green,
blue and clear channels. It has a programmable active low interrupt
pin. Interrupt occurs

iio: light: ROHM BH1745 colour sensor

Add support for BH1745, which is an I2C colour sensor with red, green,
blue and clear channels. It has a programmable active low interrupt
pin. Interrupt occurs when the signal from the selected interrupt
source channel crosses set interrupt threshold high or low level.

Interrupt source for the device can be configured by enabling the
corresponding event. Interrupt latch is always enabled when setting
up interrupt.

Add myself as the maintainer for this driver in MAINTAINERS.

Signed-off-by: Mudit Sharma <muditsharma.info@gmail.com>
Reviewed-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240718220208.331942-2-muditsharma.info@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: driver for Vishay VEML6040

Implements driver for the Vishay VEML6040 rgbw light sensor.

Included functionality: setting the integration time and reading the raw
values for the four chan

iio: light: driver for Vishay VEML6040

Implements driver for the Vishay VEML6040 rgbw light sensor.

Included functionality: setting the integration time and reading the raw
values for the four channels

Not yet implemented: setting the measurements to 'Manual Force Mode' (Auto
measurements off, and adding a measurement trigger)

Datasheet: https://www.vishay.com/docs/84276/veml6040.pdf
Signed-off-by: Arthur Becker <arthur.becker@sentec.com>
Link: https://lore.kernel.org/r/20240604-veml6040-v4-1-5a4d59597874@sentec.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: Add support for APDS9306 Light Sensor

Driver support for Avago (Broadcom) APDS9306 Ambient Light Sensor.
It has two channels - ALS and CLEAR. The ALS (Ambient Light Sensor)
channel appro

iio: light: Add support for APDS9306 Light Sensor

Driver support for Avago (Broadcom) APDS9306 Ambient Light Sensor.
It has two channels - ALS and CLEAR. The ALS (Ambient Light Sensor)
channel approximates the response of the human-eye providing direct
read out where the output count is proportional to ambient light levels.
It is internally temperature compensated and rejects 50Hz and 60Hz flicker
caused by artificial light sources. Hardware interrupt configuration is
optional. It is a low power device with 20 bit resolution and has
configurable adaptive interrupt mode and interrupt persistence mode.
The device also features inbuilt hardware gain, multiple integration time
selection options and sampling frequency selection options.

This driver also uses the IIO GTS (Gain Time Scale) Helpers Namespace for
Scales, Gains and Integration time implementation.

Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-6-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: driver for Lite-On ltr390

Implements driver for the Ambient/UV Light sensor LTR390.
The driver exposes two ways of getting sensor readings:
1. Raw UV Counts directly from the sensor

iio: light: driver for Lite-On ltr390

Implements driver for the Ambient/UV Light sensor LTR390.
The driver exposes two ways of getting sensor readings:
1. Raw UV Counts directly from the sensor
2. The computed UV Index value with a percision of 2 decimal places

[NOTE] Ambient light sensing has not been implemented yet.

Driver tested on RPi Zero 2W

Datasheet: https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20231208102211.413019-2-anshulusr@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: isl76682: Add ISL76682 driver

The ISL76682 is very basic ALS which only supports ALS or IR mode
in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any
other fancy functionalit

iio: light: isl76682: Add ISL76682 driver

The ISL76682 is very basic ALS which only supports ALS or IR mode
in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any
other fancy functionality.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231127212726.77707-2-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: add VEML6075 UVA and UVB light sensor driver

The Vishay VEMl6075 is a low power, 16-bit resolution UVA and UVB
light sensor with I2C interface and noise compensation (visible and
infrarr

iio: light: add VEML6075 UVA and UVB light sensor driver

The Vishay VEMl6075 is a low power, 16-bit resolution UVA and UVB
light sensor with I2C interface and noise compensation (visible and
infrarred).

Every UV channel generates an output signal measured in counts per
integration period, where the integration time is configurable.

This driver adds support for both UV channels and the ultraviolet
index (UVI) inferred from them according to the device application note
with open-air (no teflon) coefficients.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231110-veml6075-v3-3-6ee46775b422@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: ROHM BU27008 color sensor

The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
and IR) with four configurable channels. Red and green being always
available and two o

iio: light: ROHM BU27008 color sensor

The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
and IR) with four configurable channels. Red and green being always
available and two out of the rest three (blue, clear, IR) can be
selected to be simultaneously measured. Typical application is adjusting
LCD backlight of TVs, mobile phones and tablet PCs.

Add initial support for the ROHM BU27008 color sensor.
- raw_read() of RGB and clear channels
- triggered buffer w/ DRDY interrtupt

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/2594162f0e44148cffb1fb05f1d6edfde6bd11bc.1683541225.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: Add support for TI OPT4001 light sensor

This driver uses the continuous mode of the chip and integration
time can be configured through sysfs.
The constants for calculating lux value dif

iio: light: Add support for TI OPT4001 light sensor

This driver uses the continuous mode of the chip and integration
time can be configured through sysfs.
The constants for calculating lux value differs between packaging
so it uses different compatible string for the two versions
"ti,opt4001-picostar" and "ti,opt4001-sot-5x3" since the device id
is the same.

Datasheet: https://www.ti.com/lit/gpn/opt4001
Signed-off-by: Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
Link: https://lore.kernel.org/r/20230323-add-opt4001-driver-v3-2-62e121dab294@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: ROHM BU27034 Ambient Light Sensor

ROHM BU27034 is an ambient light sensor with 3 channels and 3 photo diodes
capable of detecting a very wide range of illuminance. Typical application
is

iio: light: ROHM BU27034 Ambient Light Sensor

ROHM BU27034 is an ambient light sensor with 3 channels and 3 photo diodes
capable of detecting a very wide range of illuminance. Typical application
is adjusting LCD and backlight power of TVs and mobile phones.

Add initial support for the ROHM BU27034 ambient light sensor.

NOTE:
- Driver exposes 4 channels. One IIO_LIGHT channel providing the
calculated lux values based on measured data from diodes #0 and
#1. In addition, 3 IIO_INTENSITY channels are emitting the raw
register data from all diodes for more intense user-space
computations.
- Sensor has GAIN values that can be adjusted from 1x to 4096x.
- Sensor has adjustible measurement times of 5, 55, 100, 200 and
400 mS. Driver does not support 5 mS which has special
limitations.
- Driver exposes standard 'scale' adjustment which is
implemented by:
1) Trying to adjust only the GAIN
2) If GAIN adjustment alone can't provide requested
scale, adjusting both the time and the gain is
attempted.
- Driver exposes writable INT_TIME property that can be used
for adjusting the measurement time. Time adjustment will also
cause the driver to try to adjust the GAIN so that the
overall scale is kept as close to the original as possible.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/2a7efb6f335da5526fbe34b95137c5e45db5c5d3.1680263956.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: tsl2563: Keep Makefile sorted by module name

The Makefile is sorted by a module name, keep it that way.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Fer

iio: light: tsl2563: Keep Makefile sorted by module name

The Makefile is sorted by a module name, keep it that way.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221207190348.9347-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: Add support for ltrf216a sensor

Add initial support for ltrf216a ambient light sensor.

Datasheet: https://gitlab.collabora.com/shreeya/iio/-/blob/master/LTRF216A.pdf
Reviewed-by: Andy S

iio: light: Add support for ltrf216a sensor

Add initial support for ltrf216a ambient light sensor.

Datasheet: https://gitlab.collabora.com/shreeya/iio/-/blob/master/LTRF216A.pdf
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Co-developed-by: Zhigang Shi <Zhigang.Shi@liteon.com>
Signed-off-by: Zhigang Shi <Zhigang.Shi@liteon.com>
Co-developed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Link: https://lore.kernel.org/r/20220725104050.491396-3-shreeya.patel@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: Added AMS tsl2591 driver implementation

Driver implementation for AMS/TAOS tsl2591 ambient light sensor.

This driver supports configuration via device tree and sysfs.
Supported channels

iio: light: Added AMS tsl2591 driver implementation

Driver implementation for AMS/TAOS tsl2591 ambient light sensor.

This driver supports configuration via device tree and sysfs.
Supported channels for raw infrared light intensity,
raw combined light intensity and illuminance in lux.
The driver additionally supports iio events on lower and
upper thresholds.

This is a very-high sensitivity light-to-digital converter that
transforms light intensity into a digital signal.

Datasheet: https://ams.com/tsl25911#tab/documents
Signed-off-by: Joe Sandom <joe.g.sandom@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210421221330.17007-1-joe.g.sandom@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: as73211: New driver

Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.

This driver has no built-in trigger. In order for making triggered
measurements, an external (software) trigg

iio: light: as73211: New driver

Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.

This driver has no built-in trigger. In order for making triggered
measurements, an external (software) trigger driver like
iio-trig-hrtimer or iio-trig-sysfs is required.

The sensor supports single and continuous measurement modes. The latter
is not used by design as this would require tight timing synchronization
between hardware and driver without much benefit.

Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull mfd updates from Lee Jones:
"New Drivers:
- Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors

Merge tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull mfd updates from Lee Jones:
"New Drivers:
- Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors

New Device Support:
- Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
- Add support for Comet Lake to Intel LPSS

New Functionality:
- Add support for Charger Detection to Spreadtrum SC27xx PMICs
- Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
- Add ACPI enumeration support to Diolan DLN2 USB Adaptor

Fix-ups:
- Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
- I2C registration; rn5t618
- Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
- Use flexible-array members; omap-usb-tll, qcom-pm8xxx
- Remove unnecessary casts; omap-usb-host, omap-usb-tll
- Power (suspend/resume/poweroff) enhancements; rk808
- Improve error/sanity checking; dln2
- Use snprintf(); aat2870-core

Bug Fixes:
- Fix PCI IDs in intel-lpss-pci"

* tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits)
mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock
mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow
mfd: dln2: Allow to be enumerated via ACPI
mfd: da9062: Add support for interrupt polarity defined in device tree
dt-bindings: bd718x7: Yamlify and add BD71850
mfd: dln2: Fix sanity checking for endpoints
mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs
mfd: sc27xx: Add USB charger type detection support
dt-bindings: mfd: Document STM32 low power timer bindings
mfd: rk808: Convert RK805 to shutdown/suspend hooks
mfd: rk808: Reduce shutdown duplication
mfd: rk808: Stop using syscore ops
mfd: rk808: Ensure suspend/resume hooks always work
mfd: rk808: Always use poweroff when requested
mfd: omap: Remove useless cast for driver.name
mfd: Kconfig: Fix some misspelling of the word functionality
mfd: pm8xxx: Replace zero-length array with flexible-array member
mfd: omap-usb-tll: Replace zero-length array with flexible-array member
mfd: cpcap: Fix compile if MFD_CORE is not selected
mfd: cros_ec: Check DT node for usbpd-notify add
...

show more ...

iio: light: Add support for Azoteq IQS621/622 ambient light sensors

This patch adds support for the Azoteq IQS621 and IQS622 ambient light
sensors, both of which can report a four-bit representation

iio: light: Add support for Azoteq IQS621/622 ambient light sensors

This patch adds support for the Azoteq IQS621 and IQS622 ambient light
sensors, both of which can report a four-bit representation of ambient
light intensity.

The IQS621 can additionally report illuminace directly in units of lux,
while the IQS622 can report a four-bit representation of infrared light
intensity. Furthermore, the IQS622 can report a unitless measurement of
a target's proximity to the device.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

show more ...

iio: light: add Dyna-Image AL3010 driver

Based on:
- 3320A in-kernel driver
- https://www.spinics.net/lists/linux-iio/msg25145.html
- https://lore.kernel.org/patchwork/patch/684179/

I decided to ke

iio: light: add Dyna-Image AL3010 driver

Based on:
- 3320A in-kernel driver
- https://www.spinics.net/lists/linux-iio/msg25145.html
- https://lore.kernel.org/patchwork/patch/684179/

I decided to keep it aside of AL3320A due to different approach and much
simpler design of 3010.

Tested on Nexus 7 2012 (grouper/tilapia).

Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: light: Add a driver for Sharp GP2AP002x00F

This driver handles two different Sharp sensors that have been
proposed for merging to the mainline kernel over the years, and
already has a limited p

iio: light: Add a driver for Sharp GP2AP002x00F

This driver handles two different Sharp sensors that have been
proposed for merging to the mainline kernel over the years, and
already has a limited proximity-only driver in the input
subsystem.

These components are completely different from the confusingly
similarly named Sharp GP2AP020A00F, for which we have a driver
in drivers/iio/light/gp2ap020a00f.c

The two components GP2AP002A00F and GP2AP002S00F are
distinctively different but similar: they share the same set of
registers but differ slightly in the I2C protocol.

Instead of the approach by the previous input driver, we create
a combined IIO proximity and light sensor driver.

The plan is to merge this driver and delete the input driver.

The pieces for the driver are picked all over the place after
researching and grepping through a few different vendor trees
and driver submissions.

We merge it under the light sensors because:

- It has similarities with the Capella CM3605 light sensor and
proximity driver which is there.

- It is related to the GP2AP020A00F driver which is also there.

This driver was tested with the Samsung GT-S7710 mobile phone
which has the GP2AP002S00F proximity sensor mounted.

The suspend/resume cycle will disable the interrupt from the
sensor. If someone would desire to use this interrupt for
wakeup, the driver will need modifications.

Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Jonathan Bakker <xc-racer2@live.ca>
Cc: Oskar Andero <oskar.andero@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...