Merge drm-intel-next-queued into gvt-next

Backmerge to pull in
https://patchwork.freedesktop.org/patch/353621/?series=73544&rev=1

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'v5.5-rc4' into locking/kcsan, to resolve conflicts

Conflicts:
init/main.c
lib/Kconfig.debug

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 5.6 merge window.

Merge tag 'v5.5-rc5' into next

Sync up with mainline to get SPI "delay" API changes.

Merge drm/drm-next into drm-misc-next

Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kern

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge tag 'v5.5-rc1' into core/kprobes, to resolve conflicts

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into sched/urgent, to pick up the latest before merging new patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johans

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / iio updates from Greg KH:
"Here is the big staging and iio set of patches for the 5.5-rc1

Merge tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / iio updates from Greg KH:
"Here is the big staging and iio set of patches for the 5.5-rc1
release.

It's the usual huge collection of cleanup patches all over the
drivers/staging/ area, along with a new staging driver, and a bunch of
new IIO drivers as well.

Full details are in the shortlog, but all of these have been in
linux-next for a long time with no reported issues"

* tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits)
staging: vchiq: Have vchiq_dump_* functions return an error code
staging: vchiq: Refactor indentation in vchiq_dump_* functions
staging: fwserial: Fix Kconfig indentation (seven spaces)
staging: vchiq_dump: Replace min with min_t
staging: vchiq: Fix block comment format in vchiq_dump()
staging: octeon: indent with tabs instead of spaces
staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error
staging: most: core: remove sysfs attr remove_link
staging: vc04: Fix Kconfig indentation
staging: pi433: Fix Kconfig indentation
staging: nvec: Fix Kconfig indentation
staging: most: Fix Kconfig indentation
staging: fwserial: Fix Kconfig indentation
staging: fbtft: Fix Kconfig indentation
fbtft: Drop OF dependency
fbtft: Make use of device property API
fbtft: Drop useless #ifdef CONFIG_OF and dead code
fbtft: Describe function parameters in kernel-doc
fbtft: Make sure string is NULL terminated
staging: rtl8723bs: remove set but not used variable 'change', 'pos'
...

show more ...

Merge tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of IIO new device support, cleanups and features for the 5.5

Merge tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of IIO new device support, cleanups and features for the 5.5 cycle

Third version with the adis rework set dropped as better to just have
a fresh version of that at some future date.

The usual mixed backs of new device support being added to drivers,
long term reworks continuing and little per driver cleanups and
features.

Also a few trivial counter subsystem tidy ups on behalf of William.

Core new feature
* Device label support. A long requested feature no one got around to
implementing before. Allows DT based provision of a 'label' that
identifies a device uniquely within a system. This differs from existing
'name' which is meant to be the part number.
New device support
* ingenic-adc
- Support for the JZ4770 SoC ADC including bindings.
* inv_mpu6050
- Add support for magnetometer in MPU925x parts.
Fiddly to do as this is actually a separate device sitting inside the
package, but with the master device being able to schedule reads etc.
Will only run if the auxiliary bus is not in use for any other devices.

Features
* ad7192
- Userspace calibration controls to do zero and full scale.
* st_lsm6dsx
- Enable latched interrupts by default for sensors events with related clear.
- Motion events and related wakeup source. This needed quite a bit of
refactoring as well.

Cleanups and minor features
* ad7192
- sysfs ABI docs
* ad7949
- Remove code to readback configuration word as driver never actually enabled
it.
- Fix incorrect xfer length. Not actually known to cause problems other
than wasted bus usage.
* adis16080
- Replace core mlock usage with local lock with more appropriate scope.
* adis16130
- Remove pointless mlock usage.
* adis16240
- Remove include of gpio.h as no gpio usage.
* atlas-ph-sensor
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* bh1750
- Fix up a static compiler warning and make the code more readable.
- yaml conversion of binding + MAINTAINERS entry.
* bmp280
- Drop a stray newline.
* cm36651
- Drop a redundant assignment
* itg3200
- Alignment cleanup.
* max31856
- Add missing of_node and parent references, useful to identify the device.
* sc27xx_adc
- Use devm_hwspin_lock_request_specific rather than local rolled version.
* stm32-lptimer counter
- kernel-doc warning.
* stm32-timer counter
- kernel-doc warning.
- Alignment cleanup.
* sx9500
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* tcs3414
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.

* tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (41 commits)
iio: pressure: bmp280: remove stray newline
iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code
iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
iio: gyro: clean up indentation issue
counter: stm32: clean up indentation issue
iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
iio: core: Add optional symbolic label to device attributes
dt-binding: iio: Add optional label property
iio: gyro: adis16080: replace mlock with own lock
counter: stm32-lptimer-cnt: fix a kernel-doc warning
counter: stm32-timer-cnt: fix a kernel-doc warning
iio: gyro: adis16130: remove mlock usage
MAINTAINERS: add entry for ROHM BH1750 driver
dt-bindings: iio: light: bh1750: convert bindings to yaml
iio: imu: st_lsm6dsx: add motion report function and call from interrupt
iio: imu: st_lsm6dsx: always enter interrupt thread
iio: imu: st_lsm6dsx: add wakeup-source option
iio: imu: st_lsm6dsx: add motion events
iio: imu: st_lsm6dsx: move interrupt thread to core
iio: imu: inv_mpu6050: add fifo support for magnetometer data
...

show more ...

iio: imu: inv_mpu6050: helpers for using i2c master on auxiliary bus

Add helper functions to use the i2c auxiliary bus with the MPU i2c
master block.

Support only register based chip, reading and 1

iio: imu: inv_mpu6050: helpers for using i2c master on auxiliary bus

Add helper functions to use the i2c auxiliary bus with the MPU i2c
master block.

Support only register based chip, reading and 1 byte writing. These
will be useful for initializing magnetometers inside MPU9x50 chips.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...