Merge remote-tracking branch 'torvalds/master' into perf-tools

To pick up changes in other trees that may affect perf, such as libbpf
and in general the header files that perf has copies of, so that

Merge remote-tracking branch 'torvalds/master' into perf-tools

To pick up changes in other trees that may affect perf, such as libbpf
and in general the header files that perf has copies of, so that we can
do the sync with the kernel sources.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver s

Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.

Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:

- lots and lots of new IIO drivers and updates to existing ones

- interconnect subsystem updates and new drivers

- nvmem subsystem updates and new drivers

- mhi driver updates

- power supply subsystem updates

- kobj_type const work for many different small subsystems

- comedi driver fix

- coresight subsystem and driver updates

- fpga subsystem improvements

- slimbus fixups

- binder new feature addition for "frozen" notifications

- lots and lots of other small driver updates and cleanups

All of these have been in linux-next for a long time with no reported
problems"

* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...

show more ...

Merge tag 'iio-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, features and cleanup for 6.12

Merge tag 'iio-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, features and cleanup for 6.12

Includes a merge of spi-mos-config branch from spi.git that brings
support needed for the AD4000 driver.

Lots of new device support this time including 9 new drivers and substantial
changes to add new support to several more.

New device support
------------------

Given we have a lot of new support, I've subcategorized them:

Substantial changes, or new driver
**********************************

adi,ad4000
- New driver for this high speed ADC.
adi,ad4695
- New driver supporting AD4690, AD4696, AD4697 and AD4698 ADCs.
- Follow up series added triggered buffer support.
adi,ad7380
- Add support for single ended parts, AD7386, ADC7387, AD7388 and -4 variants.
(driver previously only support differential parts).
These variants have an additional front end MUX so only half the channels
can be sampled efficiently.
adi,ad9467
- Refactor and extend driver to support ad9643, ad9449 and ad9652 high speed
ADCs.
adi,adxl380
- New driver for this low power accelerometer.
adi,ltc2664
- New driver supporting LTC2664 and LTC2672 DACs.
microchip,pac1921
- New driver for this power/current monitor chip.
rohm,bh1745
- New driver for this RGBC colour sensor.
rohm,bu27034anuc
- The original bu27034 was canceled before mass production, so the
driver is modified to support the BU27034ANUC which had some significant
differences. DT compatible changed to avoid chance of old driver ever
binding to real hardware.
sciosense,ens210
- New driver for ens210, ens210a, ens211, ens212, ens213a, and ens215
temperature and humidity sensors (all register compatible up to some
conversion time differences)
sensiron,sdp500
- New driver for this differential pressure sensor.
tyhx,hx9023s
- New driver to support this capacitive proximity sensor.

Minor changes to support new devices
************************************

adi,adf4377
- Add support for the single output adf4378.
kionix,kxcjk-1013
- Add support for KX022-1020 accelerometer (binding and ID table only)
liteon,ltrf216a
- Add support for ltr-308. A few minor differences in features set
rockchip,saradc
- Add ID for rk3576-saradc
sensortek,stk3310
- Add ID for stk3013 proximity sensor which (despite documentation) has
an ambient light sensor and is compatible with existing parts.

Documentation updates
---------------------

Generalize ABI docs for shunt resistor attribute
Improve calibscale and calibbias related documentation. A couple of follow
up patches to resolve duplicate documentation that resulted.

New core features
-----------------

backend
- Add option for debugfs - useful for test pattern control
- Use this for both adi-axi-adc and adi-axi-dac
trigger suspend
- Add functions to allow triggers to be suspended. This avoids problems
when a device enters suspend to idle with a sysfs trigger. Use it for now
in the bmi323 only.

New driver features
-------------------

adi,ad7192
- Add option to be a clock provider (+ additional clock config options)
adi,ad7380
- Add documentation for this fairly new driver.
adi,ad9461
- Provide control of test modes and backend validation blocks used
to identify problems (via debugfs)
adi,ad9739
- Add backend debugfs and docs for what is provided via adi-axi-dac
avago,apds9960
- Add proximity and gesture calibration offset control
bosch,bmp280
- Triggered buffer support including adding raw+scale output for sysfs.
liteon,ltr390
- Add configuration of integration time and scale.
stm,dfsdm
- Convert this SD modulator driver to backend framework and add support
for channel scaling + modern channel bindings.

Treewide cleanup
----------------

iio_dev->masklength: Making it private.
- Provide access function to read the core compute channel mask length
and a macro to iterate over elements in the active_scan_mask.
- Enables marking masklength __private preventing drivers from
writing it without triggering a build warning whilst minimizing overhead
in what are typically hot paths.
- Convert all drivers and finally mark it private.
Merge conflicts resolved in drivers applied after this point.
Constify regmap_bus
- These are never modified, so mark them const.

Core cleanup
------------

backend
- A few late breaking bits of feedback (unused variable, error messages)
dma-buffer
- Namespace exports.
core
- Drop unused assignment.

Driver cleanup
--------------

adi,ad4695
- Fixing binding to reflect that common-mode-channel is a scalar.
adi,ad7280a
- Use __free(kfree) to simplify freeing of receive buffer.
adi,ad7606
- Various dt-binding cleanup and improvements.
- Fix oversampling related gpio handling.
- Make polarity of standby gpio match documentation.
- use guard() to simplify lock handling.
adi,ad7768
- Use device_for_each_child_node_scoped() instead of fwnode equivalent.
adi,ad7124
- Reduce SPI transfers by avoiding separate writes to different fields
in the same register.
- Start the ADC in idle mode.
adi,adis
- Drop ifdefs in favor of IS_ENABLED.
adi,admv8818
- Fix wrong ABI docs.
asahi-kasei,ak8975
- Drop a prefix free compatible accidentally added recently.
aspeed,adc
- Use of_property_present() instead of of_find_property() to see if the
property is there or not.
atmel,at91,
- Use __free(kfree) to simplify freeing of channel related array.
bosch,bma400
- Use __free(kfree) to simplify freeing a locally allocated string.
bosch,bmc150
- Add missing mount-matrix binding docs.
bosch,bme680
- Fix read/write to ensure multiple necessary sequential reads without
device configuration change.
- Drop unnecessary type casts and use more appropriate data types.
- Drop some left over ACPI code as ACPI support was removed due to invalid
IDs (and no known users).
- Sort headers consistently.
- Avoid unnecessary duplicate read and redundant read of gas config.
- Use bulk reads to get calibration data.
- Reorder allocation of IIO device to be prior to device init.
- Add remaining read/write buffers to the union used already for all others.
- Tidy up error checks for consistency of style, including dev_err_probe()
- Bring the device startup procedure inline with the vendor code.
- Reorder code so mode forcing is more obvious occurring where needed.
- Tidy up data locality in reading functions so no magic data is stored
in state structures just to get it across function calls.
- Make a local lookup table static to avoid placing it on the stack.
bosch,bmp280
- Fix BME280 regmap to not include registers it doesn't have.
- Wait a little longer after config to allow for maximum possible necessary
wait.
- Reorganize headers.
- Make conversion_time_max array static to avoid placing it on the stack.
maxim,max1363
- Use __free(kfree) to simplify freeing transmission buffer.
microchip,mcp3964
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp3911
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp4728
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp4922
- Use devm_regulator_get_enable_read_voltage() and devm_* to allow
dropping of explicit remove() callback.
onnn,noa1305
- Various tidy up.
- Provide available scale values.
- Make integration time configurable.
- Fix up integration time look up (/2 error)
ti,dac7311
- Check if spi_setup() succeeded.
ti,tsc2046
- Use __free(kfree) to simplify freeing rx and tx buffers.
- Use devm_regulator_get_enable_read_voltage()

Various minor fixes not called out explicitly.

* tag 'iio-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (250 commits)
drivers:iio:Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
iio: sgp40: retain documentation in driver
iio: ABI: remove duplicate in_resistance_calibbias
dt-bindings: iio: st,stm32-adc: add top-level constraints
iio: ABI: add missing calibbias attributes
iio: ABI: add missing calibscale attributes
iio: ABI: sort calibscale attributes
iio: ABI: document calibscale_available attributes
iio: light: ltr390: Calculate 'counts_per_uvi' dynamically
iio: light: ltr390: Add ALS channel and support for gain and resolution
doc: iio: ad4695: document buffered read
iio: adc: ad4695: implement triggered buffer
iio: proximity: hx9023s: Fix error code in hx9023s_property_get()
iio: light: noa1305: Fix up integration time look up
iio: humidity: Add support for ENS210
dt-bindings: iio: humidity: add ENS210 sensor family
iio: imu: adis16460: drop ifdef around CONFIG_DEBUG_FS
iio: imu: adis16400: drop ifdef around CONFIG_DEBUG_FS
iio: imu: adis16480: drop ifdef around CONFIG_DEBUG_FS
iio: imu: adis16475: drop ifdef around CONFIG_DEBUG_FS
...

show more ...

iio: imu: adis16480: drop ifdef around CONFIG_DEBUG_FS

Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop a

iio: imu: adis16480: drop ifdef around CONFIG_DEBUG_FS

Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop any
unused code. Therefore no need to wrap the code with #ifdef.

While at it make adis16480_debugfs_init() void as the return code is
ignored.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-2-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: imu: adis16480: make use of iio_for_each_active_channel()

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when ther

iio: imu: adis16480: make use of iio_for_each_active_channel()

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com>
Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-20-98193bf536a6@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and othe

Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:

- IIO api updates and new drivers added

- wait_interruptable_timeout() api cleanups for some drivers

- MODULE_DESCRIPTION() additions for loads of drivers

- parport out-of-bounds fix

- interconnect driver updates and additions

- mhi driver updates and additions

- w1 driver fixes

- binder speedups and fixes

- eeprom driver updates

- coresight driver updates

- counter driver update

- new misc driver additions

- other minor api updates

All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"

* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of new device support, features and cleanup for 6.11

The

Merge tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of new device support, features and cleanup for 6.11

The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.

Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.

One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.

New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.

Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.

Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.

* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...

show more ...

iio: imu: adis16480: make use of the new lock helpers

Use the new auto cleanup based locks so error paths are simpler.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/202

iio: imu: adis16480: make use of the new lock helpers

Use the new auto cleanup based locks so error paths are simpler.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-7-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge tag 'iio-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, cleanups etc for 6.11

Lots of

Merge tag 'iio-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, cleanups etc for 6.11

Lots of new device support and 3 entirely new drivers.

Early pull request this cycle to allow for clean picking up of fixes
that are dependencies for some queued patch sets.

Device support
==============

adi,ad3552r
- Add AD3541R and AD3551R - single output variants of already supported
DACs.

adi,ad7192
- Add support for ad7194 24-bit ADC with integrated PGA.

adi,ad7380
- New ADC driver built up in a number of steps. Supports
- 2 channel differential ADCs: AD7380, AD7381
- 4 channel differential ADCs: AD7380-4, AD7381-4
- 2 channel pseudo-differential ADCs: AD7383, AD7384
- 4 channel pseudo-differential ADCs: AD7383-4, AD7384-4

adi,adis16475
- Support ADS16501 variant - ID and some different scale factors from
parts already supported.
- Driver refactoring then enables support for 6 more IMUs:
- ADIS16575-[2,3]
- ADIS16576-[2,3]
- ADIS16577-[2,3]

adi,adsi16480
- Driver refactoring and feature additions leading to support for 6 more
IMUs - with new delta angle and delta velocity feature:
- ADIS16545-[1,2,3]
- ADIS16547-[1,2,3]

bosch,bmi160
- Support for the bmi120 IMU: ID only. Also relax ID checking to warn
only on mismatch allowing use of fallback compatibles for new devices.

sciosense,ens160
- New driver for this metal oxide multi-gas sensor for indoor
air quality monitoring.

sensortek,stk3110
- Support for stk3311a and stk3311s34 light sensor variants. Relax ID
checking to warn only on a mismatch allowing use of fallback compatibles
for new devices.

vishay,veml6040
- New driver for this RGBW light sensor. Note that whilst the register
interface is very different, the dt-binding similar enough that it is
shared with the existing vishay,veml6075 binding

x-powers,axp20x
- Add support for axp192, very similar to another supported PMIC ADC variant
but with a few more GPIO channels.

Dt-binding only
===============

ti,ads1015
- Add binding (no driver support yet) for ti,tla2021

New features
============
core
- Variable scan type support. We have papered over this for a long time
so good to finally resolve it.
Some devices will change their data output format (typically resolution)
dependent on settings such as oversampling. A new callback is added
to enable this. First used in the ad7380 driver.
- Harden the core against missing callback functions.

dt-binding:
- Add a single-channel property that can be used in per channel nodes
instead of reg to indicate which device channel. This is important
in devices with a mixture of differential and single ended channels
as reg already just acted as an index for the differential channels
making things inconsistent if it had more meaning for single ended
channels.

adi,ad7380
- Use spi_optimize_message() to reduce reading message setup overhead.
- Add oversampling support using the new core functionality to allow
a device support multiple scan types.

invense,icm42600
- Support for low-power accelerometer modes. When a given sampling
frequency is only supported at one power mode, use that. Otherwise
default to low power at the cost of some noise unless overridden
via a new sysfs attribute.

silicon-labs,si70720
- Add control of the heater.

Cleanups and minor fixes
========================

core
- Cleanup use of sizeof(struct xxxx) in favor of sizeof(*variable)

Makefile
- Resort the iio/adc/Makefile which has drifted away from alphabetical
order.

gts library
- Fix sorting of lists with a zero in the middle. Doesn't happen with
upstream drivers, but good to harden this code. Add a related unit test.

multiple drivers
- Add missing MODULE_DESCRIPTION()
- Drop some unused structure fields.
- Drop some entirely unused structure definitions.
- Stop pointless initialization of i2c_device_id::driver_data to 0 in drivers
where it isn't used.
- Use spi_get_device_match_data() to replace open-coded equivalent.

adi,ad3552r
- Fix dt gain parameter names to reflect what the driver does. Note
discussion in patch to justify fixing it in the binding not the
driver.
- Tidy up some naming.

adi,ad7192
- Use read_avail() callback to handle the low pass filter.
- Add an aincom supply for pseudo differential operation.

adi,ad7606
- Use iio_device_claim_direct_scoped() to simplify error paths.

adi,ad7944
- Drop an unused function parameter.

adi,adrf6780
- Drop unused header.

adi,ad9467
- Use a DMA safe buffer for SPI transfers.
- Stop using tabs to pad structure field names. It was creating a lot
of noise.

adi,axi-adc
- Prevent races between enable and disable calls.
- Ensure the DRP (dynamic reconfiguration port) is locked. Not used
in most real designs, but better safe than sorry.
- Limit build to COMPILE_TEST or platforms for which the IP exists.

adi,axi-dac
- Limit build to COMPILE_TEST or platforms for which the IP exists.

ams,iaq
- Use __packed instead of ___attribute__((__packed__))

bosch,bmp280
- White space cleanup.
- Use BME280 prefix for registers that do not exist on the BMP280.
- Add parameter names to callback function definitions.
- Rename measure function to better reflect what it does which is wait
for a measurement to happen.
- Drop a redundant error check.
- Improve error messages
- Make error checks consistent as if (ret)
- Use unsigned types for inherently unsigned data.
- Refactor reading functions to not rely on a hidden t_fine variable.
- Make use of cleanup.h

freescale,mma7660
- Add mount matrix support.

invense,icm42600
- Enable the regmap cache to reduce bus accesses.

amlogic,meson-saradc
- Add dt-binding support for power-domains.

ti,adc161s626
- Use iio_device_claim_direct_scoped() to simplify error handling.

* tag 'iio-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: imu: inv_icm42600: add support of accel low-power mode
iio: document inv_icm42600 driver private sysfs attributes
MAINTAINERS: Add ScioSense ENS160
iio: chemical: ens160: add power management support
iio: chemical: ens160: add triggered buffer support
iio: chemical: add driver for ENS160 sensor
dt-bindings: iio: chemical: add ENS160 sensor
dt-bindings: vendor-prefixes: add ScioSense
iio: temperature: mcp9600: add threshold events support
dt-bindings: iio: light: add VEML6040 RGBW-LS
iio: light: driver for Vishay VEML6040
dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
iio: dac: adi-axi-dac: add platform dependencies
iio: adc: adi-axi-adc: add platform dependencies
iio: imu: inv_icm42600: add register caching in the regmap
iio: adc: mcp3564: drop redundant open-coded spi_get_device_match_data()
iio: dac: max5522: simplify with spi_get_device_match_data()
iio: addac: ad74413r: simplify with spi_get_device_match_data()
iio: adc: ti-tsc2046: simplify with spi_get_device_match_data()
iio: adc: ti-ads131e08: simplify with spi_get_device_match_data()
...

show more ...

iio: adis16480: add support for adis16545/7 families

The ADIS16545 and ADIS16547 are a complete inertial system that
includes a triaxis gyroscope and a triaxis accelerometer.
The serial peripheral i

iio: adis16480: add support for adis16545/7 families

The ADIS16545 and ADIS16547 are a complete inertial system that
includes a triaxis gyroscope and a triaxis accelerometer.
The serial peripheral interface (SPI) and register structure provide a
simple interface for data collection and configuration control.

These devices are similar to the ones already supported in the driver,
with changes in the scales, timings and the max spi speed in burst
mode.
Also, they support delta angle and delta velocity readings in burst
mode, for which support was added in the trigger handler.

Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240528142409.239187-5-ramona.gradinariu@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...