Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter,

Merge tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.

Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:

- Loads of IIO driver updates and additions

- binder driver updates (more on that below...)

- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall

- Removal of the obsolete ibmasm driver as it's not being used
anymore

- Coresight driver updates and additions

- Mei driver udpates

- Counter driver updates

- FPGA driver updates

- ICC driver updates

- lots and lots of other tiny driver updates to resolve reported
issues

All of these have been in linux-next for a while"

* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...

show more ...

Merge tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO new device support, features, cleanup for 7.3

Includes a merge of

Merge tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO new device support, features, cleanup for 7.3

Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.

New device support
------------------

adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.

dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.

Features
--------

buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.

Cleanups, minor fixes
---------------------

Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.

Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.

Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.

* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...

show more ...

iio: imu: inv_icm42607: Add inv_icm42607 Core Driver

Add the core component of a new inv_icm42607 driver. This includes
a few setup functions and the full register definition in the
header file, as

iio: imu: inv_icm42607: Add inv_icm42607 Core Driver

Add the core component of a new inv_icm42607 driver. This includes
a few setup functions and the full register definition in the
header file, as well as the bits necessary to compile and probe the
device when used on an i2c bus.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.19-rc1

Cross-merge BPF and other fixes after downstream PR.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync-up some display code needed for Async flips refactor.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.20 (7.0?) release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates

Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:

- lots of IIO driver updates, cleanups, and additions

- large interconnect driver changes as they get converted over to a
dynamic system of ids

- coresight driver updates

- mwave driver updates

- binder driver updates and changes

- comedi driver fixes now that the fuzzers are being set loose on
them

- nvmem driver updates

- new uio driver addition

- lots of other small char/misc driver updates, full details in the
shortlog

All of these have been in linux-next for a while now"

* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...

show more ...

Merge tag 'iio-for-6.19a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features and cleanup for 6.19

The usual bunc

Merge tag 'iio-for-6.19a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features and cleanup for 6.19

The usual bunch of new device support, but also quite a bit of cleanup
of the core and older drivers which is always good to see.

New device support
------------------

adi,ad4080
- Add support for AD4081, AD4083, AD4084, AD4086 and AD4087 ADCs with
slightly different features to existing supported parts (max CNV clock
count, resolution etc)
adi,adxl380
- Add support for ADXL318 and ADXL319 which have reduced functionality
compared to other supported parts, particularly around event detection.
aosong,adp810
- New driver for this differential pressure and temperature sensor.
aspeed,adc
- Add support for the AST2700 SoC ADCs which differ in small ways from
already supported parts.
bosch,sm330
- New driver for this IMU (accelerometer + gyroscop) with I2C and SPI bus
support.
invensense,icm45600
- New driver for this family of IMUs with sub drivers for accelerometer
and gyroscope elements. I2C, I3C and SPI busses all supported.
* Supports ICM45605, ICM45606, ICM45608, ICM45634, ICM45686, ICM45687,
ICM45688P, ICM45689.
* Support basic features and FIFO.
maxim,max14001
- New driver for the MAX14001 and MAX14002 ADCs.
renesas,rzt2h
- New driver supporting the RZ/T2H and RZ/N2H ADCs found in various SoCs.
renesas,rznl
- New driver supporting the RZ/NL ADC found in various SoCs.

Features
--------

adi,ad5446
- Add a DT binding doc for the 29 variants currently covered by the driver.
- Add adi,ad5542 which is compatiable with the adi,ad5542a which was
already supported.
bosch,bma220
- I2C support including an I2C bus watchdog.
- Power supply control
- Data ready trigger.
- Low pass filter control.
- Debugfs register access.
- Add Petre Rodan as a maintainer of this driver (thanks!)
bosch,bmi270
- Add support for motion events.
fsl,mpl3115
- Add a dataready trigger and related sampling frequency control.
- Add threshold events.
infineon,dps310
- Add a specific device tree binding.
maxim,max30100
- Allow control of LED pulse-width in dt-binding. Optimum value depends
on physical characteristics of the device which contains this sensor.
mediatek,mt2701
- Add dt compatible for the mt8189.
rockchip,saradc
- Add rk3506 compatible which is functionally the same as the already
supported rk3528 (which is therefore the fallback)
st,lsm6dsx
- Make sampling more flexible when both fifo and events are of interest
by decoupling the FIFO fill rate from actual sampling.

Cleanup and minor fixes
-----------------------

core
- Document and add might_sleep() to iio_push_to_buffers_with_ts_unaligned()
as it allocates a buffer, typically just on 1st call.
- Add documentation for iio_push_to_buffers_with_ts() which is being used
to replace iio_push_to_buffers_with_timestamp() in new code as it
validates the buffer size. Make the deprecation of the old function
clear.
- Document that the store_to() callback in struct iio_buffer_access_funcs
may be called from contexts that cannot sleep.
- Document that the cb() provided to a callback buffer may be called
from contexts that cannot sleep.
- Cleanup up industrialio-backend.c comments.
- Call mutex_destroy() in cleanup of buffers.
- Call device_initialize() later to avoid having to call device_put()
before configuration is otherwise complete.
- Use mutex_init_with_key() to replace opencoded version.
- Use dma_buf_unmap_attachment_unlocked() to replace opencoded version.
- Reorder Makefile for pressure sensors.
various
- Uses sysfs_emit() to replace sprintf() in read_label() and other
callbacks that typically are used to write data to sysfs buffers.
- Switch to REGCACHE_MAPLE in various drivers.
adi,docs
- Fix up formatting of cross references and other kernel-doc issues.
adi,ad4080
- Fix wrong masking of product IDs.
adi,ad5446
- Use DMA safe buffers as needed for SPI.
- Drop a duplicate device chip specific data structure where two parts
are functionally identical.
- Fail probe if reference is not available.
- Split up the massive array of chip type specific structures into
separate structures as this tends to be easier to read and maintain.
- Add explicit of_device_id entries for all supported parts.
- Split I2C and SPI parts away from core to avoid ifdef complexity.
- Switch to devm_mutex_init().
- Make use of guard() to simplify code.
- Applying IWYU principles and reorder headers.
- Various other minor cleanup.
adi,ad7124
- Add debugfs to support single cycle mode, typically only used for cases
such as validate performance of the ADC.
- Various other minor cleanup including removing some layers of indirection
that weren't necessary.
- Add extended attributes to the temperature channel which follows the same
signal path as other channels.
- Replace the setup register allocation strategy with a simpler more
predictable one (a fix for OOB from this code follows later in this pull
request).
adi,adxl345
- Ensure dt-binding allows for both interrupt wired at the same time.
arm,scmi
- Replace const_ilog2() with the resulting value which ends up simpler
to read.
bosch,bma220
- Add correct SPI mode specification to the device tree binding.
- Fix up interrupt type in dt binding example to match that the driver
expects.
- Relax hard constraint on matching chip ID with a message only so as to
enable fallback DT compatibles to work.
- Use local struct device *dev to replaces lots of indirect look ups.
- Improve includes on approximate IWYU basis.
- Explicit of_match_table.
- Reset some registers during probe.
- Move to regmap.
- Ensure a timestamp is available when filling the buffer by using a
locally acquired one rather than relying on trigger top half running.
- Add a utility function to search value pair tables for a match.
- Various other minor improvements.
- Move code to avoid a false dependency of the core code on the I2C module.
bosch,bma400
- Improve register and field naming + organization. Use with FIELD_GET()
and FIELD_PREP() to allow dropping of shift defines.
- Use macros to define event related fields.
- Switch to an address lookup based on an index variable to replace lots of
very similar register macros.
- Rename activity_event_en() to generic_event_en() to better reflect what
it does.
- Improve comments around interrupt register handling.
fsl,mpl3115
- Factor out code for triggered buffer data collection.
- Use more consistent register field naming style.
- Use get_unaligned_be24() to get the pressure.
invensense,mpu6050
- Drop false requirement in DT binding for the interrupt. The driver will
be able to do less if one is not provided, but some features are still
available.
invensense,icm45600_i3c
- Fix missing return on failure to match part.
linear,ltc2688
- Use devm_mutex_init() so mutex_destroy() is called in tear down path.
- Use guard() to simplify lock handling in error return paths.
qcom,vadc
- Fix up some kernel-doc related warnings.
rohm,bd79112 and bd79124
- Use regmap_reg_range() helper to set the ranges.
st,lsm6dsx
- Fix units of ODR in structure documentation.
ti,am335x
- Add range checks to avoid a compiler warning.
ti,pac1934
- Switch to system_percpu_wq.

Various other minor typo fixes etc.

* tag 'iio-for-6.19a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (150 commits)
staging: iio: adt7316: replace sprintf() with sysfs_emit()
iio: pressure: Arrange Makefile alphabetically
iio: ABI: document pressure event attributes
iio: mpl3115: add threshold events support
iio: mpl3115: use get_unaligned_be24() to retrieve pressure data
iio: buffer: use dma_buf_unmap_attachment_unlocked() helper
iio: core: Replace lockdep_set_class() + mutex_init() by combined call
iio: core: Clean up device correctly on iio_device_alloc() failure
iio: core: add missing mutex_destroy in iio_dev_release()
iio: accel: adxl380: add support for ADXL318 and ADXL319
dt-bindings: iio: accel: adxl380: add new supported parts
iio: imu: inv_icm45600: Initializes inv_icm45600_buffer_postdisable() sleep
iio: adc: pac1934: replace use of system_wq with system_percpu_wq
iio: dac: ad5446: Add AD5542 to the spi id table
iio: dac: ad5446: Fix coding style issues
iio: dac: ad5446: Refactor header inclusion
iio: dac: ad5446: Make use of the cleanup helpers
iio: dac: ad5446: Make use of devm_mutex_init()
iio: dac: ad5446: Separate I2C/SPI into different drivers
iio: dac: ad5456: Add missing DT compatibles
...

show more ...

iio: imu: smi330: Add driver

Add the iio driver for bosch imu smi330. The smi330 is a combined
three axis angular rate and three axis acceleration sensor.

Signed-off-by: Jianping Shen <Jianping.She

iio: imu: smi330: Add driver

Add the iio driver for bosch imu smi330. The smi330 is a combined
three axis angular rate and three axis acceleration sensor.

Signed-off-by: Jianping Shen <Jianping.Shen@de.bosch.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: imu: inv_icm45600: add new inv_icm45600 driver

Core component of a new driver for InvenSense ICM-45600 devices.
It includes registers definition, main probe/setup, and device
utility functions.

iio: imu: inv_icm45600: add new inv_icm45600 driver

Core component of a new driver for InvenSense ICM-45600 devices.
It includes registers definition, main probe/setup, and device
utility functions.

ICM-456xx devices are latest generation of 6-axis IMU,
gyroscope+accelerometer and temperature sensor. This device
includes a 8K FIFO, supports I2C/I3C/SPI, and provides
intelligent motion features like pedometer, tilt detection,
and tap detection.

Signed-off-by: Remi Buisson <remi.buisson@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to sync with v6.15-rc, xe, and specifically async flip changes
in drm-misc.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.16 merge window.

Merge tag 'v6.15-rc6' into next

Sync up with mainline to bring in xpad controller changes.

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signe

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerge to bring in linux 6.15-rc.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>