Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and othe

Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:

- IIO api updates and new drivers added

- wait_interruptable_timeout() api cleanups for some drivers

- MODULE_DESCRIPTION() additions for loads of drivers

- parport out-of-bounds fix

- interconnect driver updates and additions

- mhi driver updates and additions

- w1 driver fixes

- binder speedups and fixes

- eeprom driver updates

- coresight driver updates

- counter driver update

- new misc driver additions

- other minor api updates

All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"

* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'iio-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, cleanups etc for 6.11

Lots of

Merge tag 'iio-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, cleanups etc for 6.11

Lots of new device support and 3 entirely new drivers.

Early pull request this cycle to allow for clean picking up of fixes
that are dependencies for some queued patch sets.

Device support
==============

adi,ad3552r
- Add AD3541R and AD3551R - single output variants of already supported
DACs.

adi,ad7192
- Add support for ad7194 24-bit ADC with integrated PGA.

adi,ad7380
- New ADC driver built up in a number of steps. Supports
- 2 channel differential ADCs: AD7380, AD7381
- 4 channel differential ADCs: AD7380-4, AD7381-4
- 2 channel pseudo-differential ADCs: AD7383, AD7384
- 4 channel pseudo-differential ADCs: AD7383-4, AD7384-4

adi,adis16475
- Support ADS16501 variant - ID and some different scale factors from
parts already supported.
- Driver refactoring then enables support for 6 more IMUs:
- ADIS16575-[2,3]
- ADIS16576-[2,3]
- ADIS16577-[2,3]

adi,adsi16480
- Driver refactoring and feature additions leading to support for 6 more
IMUs - with new delta angle and delta velocity feature:
- ADIS16545-[1,2,3]
- ADIS16547-[1,2,3]

bosch,bmi160
- Support for the bmi120 IMU: ID only. Also relax ID checking to warn
only on mismatch allowing use of fallback compatibles for new devices.

sciosense,ens160
- New driver for this metal oxide multi-gas sensor for indoor
air quality monitoring.

sensortek,stk3110
- Support for stk3311a and stk3311s34 light sensor variants. Relax ID
checking to warn only on a mismatch allowing use of fallback compatibles
for new devices.

vishay,veml6040
- New driver for this RGBW light sensor. Note that whilst the register
interface is very different, the dt-binding similar enough that it is
shared with the existing vishay,veml6075 binding

x-powers,axp20x
- Add support for axp192, very similar to another supported PMIC ADC variant
but with a few more GPIO channels.

Dt-binding only
===============

ti,ads1015
- Add binding (no driver support yet) for ti,tla2021

New features
============
core
- Variable scan type support. We have papered over this for a long time
so good to finally resolve it.
Some devices will change their data output format (typically resolution)
dependent on settings such as oversampling. A new callback is added
to enable this. First used in the ad7380 driver.
- Harden the core against missing callback functions.

dt-binding:
- Add a single-channel property that can be used in per channel nodes
instead of reg to indicate which device channel. This is important
in devices with a mixture of differential and single ended channels
as reg already just acted as an index for the differential channels
making things inconsistent if it had more meaning for single ended
channels.

adi,ad7380
- Use spi_optimize_message() to reduce reading message setup overhead.
- Add oversampling support using the new core functionality to allow
a device support multiple scan types.

invense,icm42600
- Support for low-power accelerometer modes. When a given sampling
frequency is only supported at one power mode, use that. Otherwise
default to low power at the cost of some noise unless overridden
via a new sysfs attribute.

silicon-labs,si70720
- Add control of the heater.

Cleanups and minor fixes
========================

core
- Cleanup use of sizeof(struct xxxx) in favor of sizeof(*variable)

Makefile
- Resort the iio/adc/Makefile which has drifted away from alphabetical
order.

gts library
- Fix sorting of lists with a zero in the middle. Doesn't happen with
upstream drivers, but good to harden this code. Add a related unit test.

multiple drivers
- Add missing MODULE_DESCRIPTION()
- Drop some unused structure fields.
- Drop some entirely unused structure definitions.
- Stop pointless initialization of i2c_device_id::driver_data to 0 in drivers
where it isn't used.
- Use spi_get_device_match_data() to replace open-coded equivalent.

adi,ad3552r
- Fix dt gain parameter names to reflect what the driver does. Note
discussion in patch to justify fixing it in the binding not the
driver.
- Tidy up some naming.

adi,ad7192
- Use read_avail() callback to handle the low pass filter.
- Add an aincom supply for pseudo differential operation.

adi,ad7606
- Use iio_device_claim_direct_scoped() to simplify error paths.

adi,ad7944
- Drop an unused function parameter.

adi,adrf6780
- Drop unused header.

adi,ad9467
- Use a DMA safe buffer for SPI transfers.
- Stop using tabs to pad structure field names. It was creating a lot
of noise.

adi,axi-adc
- Prevent races between enable and disable calls.
- Ensure the DRP (dynamic reconfiguration port) is locked. Not used
in most real designs, but better safe than sorry.
- Limit build to COMPILE_TEST or platforms for which the IP exists.

adi,axi-dac
- Limit build to COMPILE_TEST or platforms for which the IP exists.

ams,iaq
- Use __packed instead of ___attribute__((__packed__))

bosch,bmp280
- White space cleanup.
- Use BME280 prefix for registers that do not exist on the BMP280.
- Add parameter names to callback function definitions.
- Rename measure function to better reflect what it does which is wait
for a measurement to happen.
- Drop a redundant error check.
- Improve error messages
- Make error checks consistent as if (ret)
- Use unsigned types for inherently unsigned data.
- Refactor reading functions to not rely on a hidden t_fine variable.
- Make use of cleanup.h

freescale,mma7660
- Add mount matrix support.

invense,icm42600
- Enable the regmap cache to reduce bus accesses.

amlogic,meson-saradc
- Add dt-binding support for power-domains.

ti,adc161s626
- Use iio_device_claim_direct_scoped() to simplify error handling.

* tag 'iio-for-6.11a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: imu: inv_icm42600: add support of accel low-power mode
iio: document inv_icm42600 driver private sysfs attributes
MAINTAINERS: Add ScioSense ENS160
iio: chemical: ens160: add power management support
iio: chemical: ens160: add triggered buffer support
iio: chemical: add driver for ENS160 sensor
dt-bindings: iio: chemical: add ENS160 sensor
dt-bindings: vendor-prefixes: add ScioSense
iio: temperature: mcp9600: add threshold events support
dt-bindings: iio: light: add VEML6040 RGBW-LS
iio: light: driver for Vishay VEML6040
dt-bindings: iio: adc: amlogic,meson-saradc: add optional power-domains
iio: dac: adi-axi-dac: add platform dependencies
iio: adc: adi-axi-adc: add platform dependencies
iio: imu: inv_icm42600: add register caching in the regmap
iio: adc: mcp3564: drop redundant open-coded spi_get_device_match_data()
iio: dac: max5522: simplify with spi_get_device_match_data()
iio: addac: ad74413r: simplify with spi_get_device_match_data()
iio: adc: ti-tsc2046: simplify with spi_get_device_match_data()
iio: adc: ti-ads131e08: simplify with spi_get_device_match_data()
...

show more ...

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

iio: Drop explicit initialization of struct i2c_device_id::driver_data to 0

These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.

This

iio: Drop explicit initialization of struct i2c_device_id::driver_data to 0

These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.

This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.

While add it, also remove commas after the sentinel entries.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240508072928.2135858-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.6-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.6-rc2' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.6-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver

Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.

Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:

- new IIO drivers and updates

- Interconnect driver updates

- fpga driver updates and additions

- fsi driver updates

- mei driver updates

- coresight driver updates

- nvmem driver updates

- counter driver updates

- lots of smaller misc and char driver updates and additions

All of these have been in linux-next for a long time with no reported
problems"

* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...

show more ...

Merge tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 6.6

New devic

Merge tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 6.6

New device support
* adi,ad8366
- Add support for the HMC792 digital attenuator (mostly chip specific data)
* alwinner,sun20i-gpadc
- New driver for the integrated ADC on a number of allwinner SoCs
including dt-binding documentation.
* microchip,mcp4728
- New driver for this quad channel DAC. Includes dt-bindings.
* miramems, da280
- Add ID for DA217 accelerometer which is compatible with the da280.
* murata,irs-d200
- New driver for this passive infrared sensor typically used for human
detection. Includes bindings and a few pieces of new ABI to
cover a case of needing to count a number of repeats of an event
before reporting it.
* rohm,bu27008
- Add initial support for the BU27010 RGB + flickering sensor to this
driver. Substantial refactoring was needed to enable this.

Features
* adi,admv8818
- Add mode that bypasses the input and output filters.
* amlogic,meson
- Support control of the MUX on channel 7, exposed as multiple channels.
- Support channel labels.
* sensirion,scd4x
- Add pressure compensation. Controlled via an 'output' pressure channel.
* ti,lmp92040
- Add IIO buffered supported (read via chrdev).
* vishay,vcnl4000
- Add proximity interrupt support for vcnl4200.
- Add proximity integration time control for vcnl4200.
- Add illuminance integration time control for vcnl4040 and vcnl4200.
- Add calibration bias, proximity and illuminance event period, and
oversampling ratio control for vcnl4040 and vncl4200.

Cleanup and minor fixes
* core
- Tidy up handling of set_trigger_state() callback return values
to consistently assume no positive return values.
- Use min() rather than min_t() in a case where types were clearly
the same.
- Drop some else statements that follow continue with a loop or
a returns.
- White space and comment format cleanup.
- Use sysfs_match_string() helper to improve readability.
- Use krealloc_array() to make it explicit a krealloc is for an array
of structures, not just one.
* tools
- Tidy up potential overflow in array index.
* tree wide
- Fix up includes for DT related headers.
- Drop some error prints in places where as similar error message
is printed by the function being called.
- Tidy up handling of return value from platform_get_irq() to no longer
take into account 0 as a value that might be returned. Similar for
fwnode_irq_get().
* adi,ad7192
- Add missing error check and improved debug logging.
- Use sysfs_emit_at() rather than open coded variant.
* adi,adis16475
- Drop unused scan element enum entries.
- Specify that a few more devices support burst32 mode.
* adi,admv1013
- Enable all required regulators and document as required in the
dt-binding.
* adi,admv1014
- Make all regulators required in the dt-binding as the device needs
them all enabled.
* adi,adxl313
- Fix wrong enum values being used in the i2c_device_id table.
- Use i2c_get_match_data() to reduce open coded handling of the
various id tables.
* allwinner,gpadc
- Make the kconfig text more specific to make space for separate drivers
for other Allwinner devices.
* amlogic,meson
- Drop unused timestamp channels as no buffer support.
- Various minor reorganizations to enable addition of support channel 7
MUX.
- Initialize some default values to account for potential previous user
since reboot.
* qcom,spmi-adc5
- Add ADC5_GPIO2_100K_PU support to driver to line up with bindings.
* qcom,spmi-adc7
- Use predefined channel ID definitions rather than values.
* invensense, common
- Factor out the timestamp handling to a module used by both mpu6050 and
icm42600.
* invensense,mpu6050
- Read as many FIFO elements as possible in one bus access.
* men,s188
- Drop redundant initialization of driver owner field.
* microchip,mcp4018 and mcp4531
- Use i2c_get_match_data() instead of open coding. Includes making the
data format the same for the i2c_device_id and firmware match
tables.
* semtech,sx9310
- dt-bindings: Add reference to IIO schema to provide the label property.
* semtech,sx9324
- dt-bindings: Add reference to IIO schema to provide the label property.
* st,stm32-adc
- Use devm_platform_get_and_ioremap_resource() instead of open coded
version.
* st,stm-lptimer-trigger
- Drop setting platform drvdata as it wasn't then used.
* ti,ads1015
- Fix wrong dt binding description of ti,datarate for some devices.
* vishay,vcnl4200
- Move to switch statements for channel type checking to make later
additions simpler.

* tag 'iio-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (73 commits)
Documentation: ABI: testing: admv8818: add bypass
drivers: iio: filter: admv8818: add bypass mode
iio: light: bd27008: Support BD27010 RGB
iio: light: bu27008: add chip info
dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor
iio: add MCP4728 I2C DAC driver
dt-bindings: iio: dac: add mcp4728.yaml
drivers: iio: admv1013: add vcc regulators
dt-bindings: iio: admv1013: add vcc regulators
iio: trigger: stm32-lptimer-trigger: remove unneeded platform_set_drvdata()
iio: adc: men_z188_adc: Remove redundant initialization owner in men_z188_driver
dt-bindings: iio: admv1014: make all regs required
iio: cdc: ad7150: relax return value check for IRQ get
iio: mb1232: relax return value check for IRQ get
iio: adc: fix the return value handle for platform_get_irq()
tools: iio: iio_generic_buffer: Fix some integer type and calculation
iio: potentiometer: mcp4531: Use i2c_get_match_data()
iio: potentiometer: mcp4018: Use i2c_get_match_data()
iio: core: Fix issues and style of the comments
iio: core: Switch to krealloc_array()
...

show more ...

iio: add MCP4728 I2C DAC driver

MCP4728 is a 12-bit quad channel DAC with I2C interface.

support for:
* per-channel gain
* per-channel power state
* per-channel power down mode control
* per-ch

iio: add MCP4728 I2C DAC driver

MCP4728 is a 12-bit quad channel DAC with I2C interface.

support for:
* per-channel gain
* per-channel power state
* per-channel power down mode control
* per-channel vref selection internal/vdd
* store current state to on-chip EEPROM

Signed-off-by: Andrea Collamati <andrea.collamati@gmail.com>
Link: https://lore.kernel.org/r/a0933003ed3c855f9d80d6ce0a40add2b6f0ba36.1691066050.git.andrea.collamati@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...