Merge drm/drm-fixes into drm-misc-fixes

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other

Merge tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other smaller driver subsystem updates
for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:

- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)

- lots of comedi driver updates and bugfixes

- coresight driver updates

- interconnect driver updates and additions

- mei driver updates

- binder (both rust and C versions) updates and fixes

- lots of other smaller driver subsystem updates and additions

All of these have been in linux-next for a while with no reported
issues"

* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
coresight: tpdm: fix invalid MMIO access issue
mei: me: add nova lake point H DID
mei: lb: add late binding version 2
mei: bus: add mei_cldev_uuid
w1: ds2490: drop redundant device reference
bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
mei: csc: wake device while reading firmware status
mei: csc: support controller with separate PCI device
mei: convert PCI error to common errno
mei: trace: print return value of pci_cfg_read
mei: me: move trace into firmware status read
mei: fix idle print specifiers
mei: me: use PCI_DEVICE_DATA macro
sonypi: Convert ACPI driver to a platform one
misc: apds990x: fix all kernel-doc warnings
most: usb: Use kzalloc_objs for endpoint address array
hpet: Convert ACPI driver to a platform one
misc: vmw_vmci: Fix spelling mistakes in comments
parport: Remove completed item from to-do list
char: remove unnecessary module_init/exit functions
...

show more ...

Merge tag 'iio-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New devices support, features and cleanup for 7.1

Includes merge

Merge tag 'iio-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New devices support, features and cleanup for 7.1

Includes merge of v7.0-rc4 to pull in a fix and a merge of
ib-iio-thermal-qcom-pmic5 immutable branch (provided from the IIO tree so
thermal could also pick this up and add thermal specific remainder
of the series on top.

New device support
------------------

adi,ad4030
- Add support for ADA4316 and ADAQ4224 ADCs with PGAs.
adi,ad4080
- Add support for AD4082, AD4085 and AD4088 ADCs.
adi,ad8366
- Add ADRF5702 and ADRF5703 digital step attenuators.
adi,adxl372
- Add support for the ADXL371 accelerometer after refactors to allow multiple
device variants to be supported by the driver. In particular a silicon
issue means the hardware FIFO doesn't work on the ADXL371
bosch,bma255/bmg160
- Add support for BMX055 gyroscope and magnetometer (effectively separate
devices from point of view of interface).
lltc,ltc2309
- Add support for LTC2305 2 channel 12-bit ADC.
lltc,ltc2532
- Add support for 4 variants of the LTC2654 quad DAC.
maxim,ds4424
- Add IDs for DS4402 and DS4404 parts. Initially patch is ID only but additional
features also added that are device dependent.
qcom,spmi-adc-gen3
- New driver supporting this generation of Qualcomm's SoC ADC.
st,vl53l1
- New driver for this Time Of Flight (TOF) sensor.
ti,ina2xx
- Support the INA236 digital power monitor.
vishay,vcnl4000
- Add support for CM36686 ambient light and proximity sensor.
- Add support for CM36672P proximity sensors.

ID only additions.
amlogic,meson-adc
- Support the Meson S4.

Features
--------

iio-backend framework
- Add capability discovery so front end drivers can know what features are
available from the backend and adjust how they operate.
adi,ad4030
- Add SPI offload support requiring a non trivial PWM setup.
adi,ad7380
- Add support for multiple SPI lanes to improve throughput.
adi,ad7768-1
- Support SPI offload and always use continuous mode, enabling more
filter options.
adi,ad8366
- Device tree bindings and support.
aspeed,adc
- Handle battery channel.
maxim,ds4424
- Add external resistor controlled scale and per-variant limits.
- Handle per variant range limits.
- Move it to regmap.
motorola,cpcap-adc
- Support for the ADC found on the Motorola Mot board. Effectively some board
specific configuration handled in the driver.
vishay,vcnl4000
- Support explicit power supply regulators.
tyhx,hx9023s
- Allow device tree specification of firmware file name.

Cleanup and minor fixes
-----------------------

treewide
- Remove a bunch of unused structure elements.
- Replaces standard fixed width integers with kernel types.
- Replace some other error values that were returned on allocation failure
with -ENOMEM
iio-core
- Replace a few custom devm implementations for devm_add_action_or_reset()
iio-trigger
- Use put_device() to cleanup on error.
iio-backend
- Use __free(fwmode_handle) to simplify some code.
hw-consumer
- Use separate allocation for scan mask bitmap to simplify code.
acpi-als
- Switch from ACPI driver to platform driver.
adi,ad4030
- Use BIT() to replace values that are always a power of 2 to slightly
improve readability.
adi,ad4062
- Add a missing check for error form iio_get_current_scan_type()
adi,ad5933
- Use div64_ul() rather than do_div() as remainder was not used.
adi,ad7191
- Documentation fixes related to clocks
adi,ad7816
- Use sysfs_emit()
adi,ad8366
- General driver modernization
adi,adf4350
- Change a TOOD to NOTE in a comment to avoid anyone from walking into
a tricky to improve corner case.
adi,admv1013
- Avoid a null pointer dereference if device_property_read_string() fails.
adi,admv4420
- Return error code rather than -1..
adi,adxl345
- Add separate scaling for events from that of raw channels.
amlogic,meson-adc
- Don't bother keeping nvmem cell access around when only used in probe.
atmel,at91-sama5d
- Don't bother keeping nvmem cell access around when only used in probe.
bosch,bmc150
- Use sysfs_emit() in a few places.
honeywell,hsc030pa
- Improve handling of return values from i2c_transfer.
liteon,ltr501
- Return error values rather than -1 replaced by -EINVAL at higher
levels of the callstack.
maxim,ds4424
- A bunch of general minor improvements prior to adding new features.
maxim,max11410
- Make some const string arrays static.
maxim,max5522
- Use devm_regulator_get_enable_read_voltage() at probe to cache the
voltage rather than keeping the regulator around to access and query
later.
vishay,vcnl4000
- Various code improvements.
sharp,gp2ap020a00f
- General driver modernization.
silabs,si7210
- Use devm_regulator_get_enable_read_voltage() at probe to cache the
voltage rather than keeping the regulator around to access and query
later.
st,lsm6dsx
- Add SMOCF00 ACPI ID seen on products by SHIFT.
st,st_sensors
- Fix up various kernel-doc issues.
- Avoid kmalloc of a single use buffer and instead reused existing
buffer_data.
taos,tsl2772
- Fix some kernel-doc warnings due to missing :
ti,ads7950
- Use iio_push_to_buffers_with_ts_unaligned() as first few elements of
array are not the data that is pushed.
- Move from array of chip_info structures to individual named ones. This
is part of slowly replacing use of a code pattern that we don't want
replicated in new drivers.
vti,sca3000
- General driver modernization included use of devm and guard().

Various other more minor stuff not called out explicitly.
Includes things like typo fixes, use of dev_err_probe() and local
variables to avoid repeated dereferencing of the same member as well as
increasing use of guard() to simplify release of locks.

Another slow improvement to code quality is both standardizing on
header order and ensure all appropriate headers are included.

* tag 'iio-for-7.1a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (217 commits)
Docs: iio: ad7191 Correct clock configuration
iio: amplifiers: ad8366: add support for adrf5702/3
dt-bindings: iio: amplifiers: ad8366: add adrf5702/3 support
iio: adc: meson-saradc: add support for Meson S4
dt-bindings: iio: adc: amlogic,meson-saradc: add S4 compatible
iio: imu: st_lsm6dsx: Add ACPI ID for SHIFT13mi gyroscope
iio: proximity: add driver for ST VL53L1X ToF sensor
dt-bindings: iio: proximity: add ST VL53L1X ToF sensor
iio: adc: max11410: make vref register name arrays static const
iio: accel: bmc150-accel-core: use sysfs_emit() in show functions
iio: frequency: adf4350: replace TODO with NOTE in adf4350_set_freq()
iio: adc: ltc2309: add support for ltc2305
iio: adc: ltc2309: explicitly assign hex values to channel enums
dt-bindings: adc: ltc2497: add support for ltc2305
iio: accel: adxl380: fix typo in PART_ID register macro
iio: dac: ds4424: add Rfs-based scale and per-variant limits
dt-bindings: iio: dac: maxim,ds4424: add maxim,rfs-ohms property
iio: dac: ds4424: convert to regmap
iio: dac: ds4424: support per-variant output range limits
iio: dac: ds4424: add DS4402/DS4404 device IDs
...

show more ...

iio: amplifiers: ad8366: add support for adrf5702/3

Add chip info structs and device table entries for ADRF5702 and ADRF5703
Digital Step Attenuators.

Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Sign

iio: amplifiers: ad8366: add support for adrf5702/3

Add chip info structs and device table entries for ADRF5702 and ADRF5703
Digital Step Attenuators.

Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: amplifiers: ad8366: update device support

Add support for the following digital step attenuators:
- HMC271A: 1dB LSB 5-Bit Digital Attenuator SMT, 0.7 - 3.7 GHz
- ADRF5720: 0.5 dB LSB, 6-Bit, D

iio: amplifiers: ad8366: update device support

Add support for the following digital step attenuators:
- HMC271A: 1dB LSB 5-Bit Digital Attenuator SMT, 0.7 - 3.7 GHz
- ADRF5720: 0.5 dB LSB, 6-Bit, Digital Attenuator, 9 kHz to 40 GHz
- ADRF5730: 0.5 dB LSB, 6-Bit, Digital Attenuator, 100 MHz to 40 GHz
- ADRF5731: 2 dB LSB, 4-Bit, Digital Attenuator, 100 MHz to 40 GHz
- HMC1018A: 1.0 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.1 - 30 GHz
- HMC1019A: 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.1 - 30 GHz

Additionally, copyright notice was updated with current year.

Co-developed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Co-developed-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device (Lucas Zampieri)

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf before 7.0-rc1

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other small

Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:

- Loads of iio driver changes and updates and additions

- gpib driver updates

- interconnect driver updates

- i3c driver updates

- hwtracing (coresight and intel) driver updates

- deletion of the obsolete mwave driver

- binder driver updates (rust and c versions)

- mhi driver updates (causing a merge conflict, see below)

- mei driver updates

- fsi driver updates

- eeprom driver updates

- lots of other small char and misc driver updates and cleanups

All of these have been in linux-next for a while, with no reported
issues"

* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...

show more ...

Merge tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features and cleanup for the 6.20/7.0 cycle.

Merge tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features and cleanup for the 6.20/7.0 cycle.

Slightly messier than normal unfortunately due to some conflicts
and build config bugs related to I3C drivers.

One last minute Kconfig fix right at the top after a linux-next report.
I've simplified the Kconfig and made it match other instances in the kernel
so that should be safe enough despite short soak time in front of build bots.

Merge of an immutable branch from I3C to get some stubs that were missing
and caused build issues with dual I2C / I3C drivers. This also brought in a
drop of some deprecated interfaces so there is also one patch to update a
new driver to not use those.

We are having another go at using cleanup.h magic with the IIO mode claim
functions after backing out last try at this. This time we have wrappers
around the new ACQUIRE() and ACQUIRE_ERR() macros.
Having been burnt once, we will be taking it a bit more slowly this time
wrt to wide adoption of these! Thanks in particular to Kurt for taking
on this core IIO work.

New Device Support
==================

adi,ad18113
- New driver to support the AD18113 amplifier - an interesting device due
to the external bypass paths where we need to describe what gain those
paths have in DT. Longer term it will be interesting to see if this
simplistic description is enough for real deployments.
adi,ad4062
- New driver for the AD4060 and AD4052 SAR ADCs including trigger, event
and GPIO controller support. Follow up patch replaced use of some
deprecated I3C interfaces prior to the I3C immutable branch merge as
that includes dropping them.
adi,ad4134
- New driver for the AD4134 24bit 4 channel simultaneous sampling ADC.
adi,ad7768-1,
- Add support for the ADAQ767-1, ADAQ7768-1 and ADAQ7769-1 ADCs after some
rework to enable the driver to support multiple device types.
adi,ad9467
- Add support for the similar ad9211 ADC to this existing driver.
- Make the selection of 2s comp mode explicit for normal operation and
switch to offset binary when entering calibration mode.
honeywell,abp2
- New driver to support this huge family (100+) of board mount pressure and
temperature sensors.
maxim,max22007
- New drier for this 4 channel DAC.
memsic,mmc5633
- New driver for this I2C/I3C magnetometer. Follow on patches fixed up
issues related to single driver supporting both bus types.
microchip,mcp747feb02
- New driver for the Microchip MCP47F(E/V)B(0/1/2)1,
MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8
buffered voltage output DACs.
nxp,sar-adc
- New driver support ADCs found on s32g2 and s32g3 platforms.
ti,ads1018
- New drier for the ADS1018 and ADS1118 SPI ADCs.
ti,ads131m02
- New driver supporting ADS131M(02/03/04/06/08)24-bit simultaneous sampling
ADCs.

Features
========

iio-core
- New IIO_DEV_ACQUIRE_DIRECT_MODE() / IIO_DEV_ACQUIRE_FAILED() +
equivalents for the much rarer case where the mode needs pinning
whether or not it is in direct mode. These use the ACQUIRE()
/ ACQUIRE_ERR() infrastructure underneath to provide both simple
checks on whether we got the requested mode and to provide scope
based release. Applied in a few initial drivers.
adi,ad9467
- Support calibbias control
adi,adf4377
- Add support to act as a clock provider.
adi,adxl380
- Support low power 1KHz sampling frequency mode. Required rework of
how events and filters were configured, plus applying of constraints
when in this mode.
rf-digital,rfd77402
- Add interrupt support as alternative to polling for completion.
st,lsm6dsx
- Tap event detection (after considerable driver rework)

Cleanup and Minor Fixes
=======================

More minor cleanup such as typos, white space etc not called out except
where they were applied to a lot of drivers.

Various drivers.
- Use of dev_err_probe() to cleanup error handling.
- Introduce local struct device and struct device_node variables to
reduce duplication of getting them from containing structs.
- Ensure uses of iio_trigger_generic_data_rdy_poll() set IRQF_NO_THREAD
as that function calls non threaded child interrupt handlers.
- Replace IRQF_ONESHOT in not thread interrupt handlers with
IRQF_NO_THREAD to ensure they run as intended. Drop one unnecessary case.
iio-sw-device/trigger.
- Constify configs_group_operations structures.
iio-buffer-dma / buffer-dma-engine
- Use lockdep_assert_held() to replace WARN_ON() to check lock is
correctly held.
- Make use of cleanup.h magic to simplify various code paths.
- Make iio_dma_buffer_init() return void rather than always success.

adi,ad7766
- Replace custom interrupt handler with iio_trigger_generic_data_rdy_poll()
adi,ad9832
- Drop legacy platform_data support.
adi,ade9000
- Add a maintainer entry.
adi,adt7316
- Move to EXPORT_GPL_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() so the compiler
can cleanly drop unused pm structures and callbacks.
adi,adxl345
- Relax build constraint vs the driver that is in input so both may be
built as modules and selection made at runtime.
adi,adxl380
- Make sure we don't read tail entries in the hardware fifo if a partial
new scan has been written.
- Move to a single larger regmap_noinc_read() to read the hardware fifo.
aspeed,ast2600
- Add missing interrupts property to DT binding.
bosch,bmi270_i2c
- Add missing MODULE_DEVICE_TABLE() macros so auto probing of modules can
work.
bosch,smi330
- Drop duplicate assignment of IIO_TYPE in smi330_read_avail()
- Use new common field_get() and field_prep() helpers to replace local
version.
honeywell,mprls0025pa
Fixes delayed to merge window as late in cycle and we didn't want to delay
the rest of the series.
- Allow Kconfig selection of specific bus sub-drivers rather than tying that
to the buses themselves being supported.
- Zero spi_transfer structure to avoid chance of unintentionally set fields
effecting transfer.
- Fix a potential timing violation wrt to the chip select to first clock
edge timing.
- As recent driver, take risk inherent in dropping interrupt direction from
driver as that should be set by firmware.
- Fix wrong reported number of data bits for channel.
- Fix a pressure channel calculation bug.
- Rework to allow embedding the tx buffer in the iio_priv() structure rather
than requiring separate allocation.
- Move the buffer clearing to the shared core bringing it into affect for
SPI as well as I2C.
- Stricter checks for status byte.
- Greatly simplify the measurement sequence.
- Add a copyright entry to reflect Petre's continued work on this driver.
intersil,isl29018
- Switch from spritnf to sysfs_emit_at() to make it clear overflow can't
occur.
invensense,icm42600
- Allow sysfs access to temperature when buffered capture in use as it
does not impact other sensor data paths.
invensense,itg3200
- Check unused return value in read_raw() callback.
men,z188
- Drop now duplicated module alias.
rf-digital,rfd77402
- Add DT binding doc and explicit of_device_id table.
- Poll for timeout with times as on datasheet, then replace opencoded
version with read_poll_timeout().
sensiron,scd4x
- Add missing timestamp channel. The code to push it to the buffer was there
but there was no way to turn it on.
vti,sca3000
- Fix resource leak if iio_device_register() fails.

* tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (144 commits)
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
iio: Replace IRQF_ONESHOT with IRQF_NO_THREAD
iio: Use IRQF_NO_THREAD
iio: dac: Add MAX22007 DAC driver support
dt-bindings: iio: dac: Add max22007
...

show more ...

iio: amplifiers: adl8113: add driver support

Add support for adl8113 10MHz to 12GHz Low Noise Amplifier with
10MHz to 14GHz bypass switches.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.c

iio: amplifiers: adl8113: add driver support

Add support for adl8113 10MHz to 12GHz Low Noise Amplifier with
10MHz to 14GHz bypass switches.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Merge pm/opp tree to get dev_pm_opp_get_bw()

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge drm/drm-next into drm-intel-next

Catching up with 6.13-rc2.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-xe-next

Backmerging to get up-to-date and to bring in a fix that was
merged through drm-misc-fixes.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge 6.12-rc4 into tty-next

We need the tty/serial fixes in here as well

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>