Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge

Backmerge of drm-next, mainly to pick up dt bindings docs updates to
avoid conflicts.

Signed-off-by: Rob Clark <robin.clark@oss.q

Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge

Backmerge of drm-next, mainly to pick up dt bindings docs updates to
avoid conflicts.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter,

Merge tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.

Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:

- Loads of IIO driver updates and additions

- binder driver updates (more on that below...)

- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall

- Removal of the obsolete ibmasm driver as it's not being used
anymore

- Coresight driver updates and additions

- Mei driver udpates

- Counter driver updates

- FPGA driver updates

- ICC driver updates

- lots and lots of other tiny driver updates to resolve reported
issues

All of these have been in linux-next for a while"

* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...

show more ...

Merge tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO new device support, features, cleanup for 7.3

Includes a merge of

Merge tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO new device support, features, cleanup for 7.3

Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.

New device support
------------------

adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.

dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.

Features
--------

buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.

Cleanups, minor fixes
---------------------

Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.

Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.

Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.

* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...

show more ...

Merge tag 'iio-fixes-for-7.2b-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of fixes for the 7.2 cycle.

Given timing thes

Merge tag 'iio-fixes-for-7.2b-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: 2nd set of fixes for the 7.2 cycle.

Given timing these are probably now merge window material.

Usual mixed bunch of ancient issues and newer ones.

core,buffer
- Fix a potential UAF in release on anonymous buffers.
- Make sure DMA fence lock lifetime matches that of the DMA fence.
- Make IIO DMA fence release RCU safe.
various
- Kconfig missing REGMAP* related selects.
- Unbalance of runtime pm or regulators in error paths.

adi,ad3552r-hs
- Fixing wrong buffers size for string printing.
adi,ad4080
- Fix 16-bit part support by adding path to tell the backend what
the data size is - avoiding corrupted data capture.
adi,ad5446
- Wrong MODULE_DEVICE_TABLE() type due to case error.
atlas,sensor
- Drop use of irq_work() in favour of iio_trigger_poll_nested() avoiding
a possible UAF.
hid-temperature
- Potential release ordering issue due to mixed devm and not that
can lead to long timeouts.
infineon,dps310
- Fix NULL dereference on ACPI platforms.
invense,mpu3050
- Fix sign of raw angular velocity readings.
mitsubishi,m62332
- Fix a regulator reference counting issue when switching channels.
sharp,gp2ap002
- Unbalanced runtime PM on repeated event writes.
- Reenable irq if runtime suspend fails.
ti,ads7138
- Disable statistics gathering whilst reading conversions results
to avoid data corruption.
ti,opt4001
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Fix use of wrong register.
- Pointer type mismatch to div_u64_rem()
- Fix reversed GENMASK() arguements.
ti,opt4060
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Pointer type mismatch to div_u64_rem()
- Wrong register name in an error print.
ti,pac1921
- Fix wrong channel used in the trigger handler for some combinations
of enabled channels.

* tag 'iio-fixes-for-7.2b-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (31 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...

show more ...

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch-specific tracepoints in KVM RISC-V
- Eager Page Splitting for KVM RISC-V
- Optimize hfence request handling for SMP Guests
- Improve dirty log clearing by skipping zero bits in mask
- Guard HFENCE range loops against overflow
- CPU PM notifiers in KVM RISC-V for non-retentive idle states
- Fix kernel-mode vector context save/restore for Guest

show more ...

iio: adc: ltc2378: Enable triggered buffer data capture

Enable users to run triggered data captures with LTC2378 and similar ADCs.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewe

iio: adc: ltc2378: Enable triggered buffer data capture

Enable users to run triggered data captures with LTC2378 and similar ADCs.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

show more ...

iio: adc: ltc2378: Enable high-speed data capture

Make use of SPI transfer offloading to speed up data capture, enabling data
acquisition at faster sample rates (up to 2 MSPS).

Reviewed-by: Andy Sh

iio: adc: ltc2378: Enable high-speed data capture

Make use of SPI transfer offloading to speed up data capture, enabling data
acquisition at faster sample rates (up to 2 MSPS).

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

show more ...

iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs

Support for LTC2378-20 and similar analog-to-digital converters.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-b

iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs

Support for LTC2378-20 and similar analog-to-digital converters.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

show more ...

iio: adc: ti-ads112c14: add support for I2C CRC8

Add support for I2C CRC8 to the TI ADS112C14 ADC driver. This verifies
data integrity of all I2C transactions with the device.

For now, it is always

iio: adc: ti-ads112c14: add support for I2C CRC8

Add support for I2C CRC8 to the TI ADS112C14 ADC driver. This verifies
data integrity of all I2C transactions with the device.

For now, it is always enabled, but it could be made optional in the
future if needed (e.g. for higher-speed data acquisition).

Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

show more ...

iio: adc: add ti-ads112c14 driver

Add a new driver for the TI ADS112C14/ADS122C14 ADC chips.

This first step is adding a very basic driver that only supports power
on/reset and reading the system m

iio: adc: add ti-ads112c14 driver

Add a new driver for the TI ADS112C14/ADS122C14 ADC chips.

This first step is adding a very basic driver that only supports power
on/reset and reading the system monitor channels.

ADS112C14_SYS_MON_CHANNEL_SHORT is the last channel rather than being in
logical order by address to keep the voltage channels together and in
case we find we need to add variants of this channel with different
voltage reference later.

Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

show more ...

Merge 7.2-rc3 into char-misc-next

Resolves the merge conflicts in:
drivers/android/binder/node.rs
drivers/android/binder/process.rs

As done by linux-next

Reported-by: Mark Brown <broonie@kernel.

Merge 7.2-rc3 into char-misc-next

Resolves the merge conflicts in:
drivers/android/binder/node.rs
drivers/android/binder/process.rs

As done by linux-next

Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge 7.2-rc3 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 7.2-rc3 into usb-next

We need the USB fixes in here as well to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 7.2-rc3 into staging-next

We need the staging fixes in here, and it resolves a merge conflict in:
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linu

Merge 7.2-rc3 into staging-next

We need the staging fixes in here, and it resolves a merge conflict in:
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

iio: adc: max14001: add missing 'select REGMAP' to Kconfig

The Kconfig entry for the MAX14001 is missing a 'select REGMAP',
causing build failures.

Fixes: 59795109fa67 ("iio: adc: max14001: New dri

iio: adc: max14001: add missing 'select REGMAP' to Kconfig

The Kconfig entry for the MAX14001 is missing a 'select REGMAP',
causing build failures.

Fixes: 59795109fa67 ("iio: adc: max14001: New driver")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

show more ...

iio: adc: max34408: add missing 'select REGMAP_I2C' to Kconfig

The Kconfig entry for the MAX34408 is missing a 'select REGMAP_I2C',
causing build failures.

Fixes: cf27775838c5 ("iio: adc: Add drive

iio: adc: max34408: add missing 'select REGMAP_I2C' to Kconfig

The Kconfig entry for the MAX34408 is missing a 'select REGMAP_I2C',
causing build failures.

Fixes: cf27775838c5 ("iio: adc: Add driver support for MAX34408/9")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

show more ...

iio: adc: versal-sysmon: add I2C driver

Add an I2C transport driver for the Versal SysMon block. The SysMon
provides an I2C slave interface that allows an external master to
read voltage and tempera

iio: adc: versal-sysmon: add I2C driver

Add an I2C transport driver for the Versal SysMon block. The SysMon
provides an I2C slave interface that allows an external master to
read voltage and temperature measurements through the same register
map used by the MMIO path.

The I2C command frame is an 8-byte structure containing a 4-byte data
payload, a 2-byte register offset, and a 1-byte instruction field.
Read operations send the frame with a read instruction, then receive
a 4-byte response containing the register value.

Events are not supported on the I2C path because there is no
interrupt line and the I2C regmap backend cannot be called from
atomic context.

Co-developed-by: Conall O'Griofa <conall.ogriofa@amd.com>
Signed-off-by: Conall O'Griofa <conall.ogriofa@amd.com>
Signed-off-by: Salih Erim <salih.erim@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: adc: add Versal SysMon driver

Add the core driver and MMIO platform driver for the AMD/Xilinx Versal
System Monitor (SysMon) block.

The SysMon block resides in the platform management controll

iio: adc: add Versal SysMon driver

Add the core driver and MMIO platform driver for the AMD/Xilinx Versal
System Monitor (SysMon) block.

The SysMon block resides in the platform management controller (PMC) and
provides on-chip voltage and temperature monitoring through a 10-bit,
200 kSPS ADC. It can monitor up to 160 voltage channels and 64
temperature satellites distributed across the SoC, with a consistent
sample rate of 8 kSPS per channel regardless of how many channels are
enabled.

The hardware also provides four aggregate temperature registers that
are always present regardless of the device tree configuration: the
current max and min across all active satellites, and the peak and
trough values recorded since the last hardware reset.

The driver is split into two compilation units:
- versal-sysmon-core: Channel parsing, IIO registration, read_raw
- versal-sysmon: MMIO platform driver with custom regmap accessors

Voltage results are stored in a 19-bit modified floating-point format
and converted to millivolts. Temperature results are stored in Q8.7
signed fixed-point Celsius format and converted to millicelsius.

The MMIO regmap backend uses a custom reg_write accessor that
automatically unlocks the NPI (NoC programming interface) lock
register before each write, as required by the hardware. The regmap
is configured with fast_io since the underlying MMIO accessors are
safe to call from atomic context.

Co-developed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Salih Erim <salih.erim@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: adc: mt6323-auxadc: add mt6323 PMIC AUXADC driver

The mt6323 AUXADC is a 15-bit ADC used for system monitoring. This driver
provides support for reading various channels including battery and
c

iio: adc: mt6323-auxadc: add mt6323 PMIC AUXADC driver

The mt6323 AUXADC is a 15-bit ADC used for system monitoring. This driver
provides support for reading various channels including battery and
charger voltages, battery and chip temperature, current sensing and
accessory detection.

Add a driver for the AUXADC found in the MediaTek mt6323 PMIC.

Tested-by: Ben Grisdale <bengris32@protonmail.ch> # Amazon Echo Dot (2nd Generation)
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: adc: ad_sigma_delta: allow COMPILE_TEST in isolation

AD_SIGMA_DELTA is a hidden tristate that can only be enabled by
selecting drivers (AD7124, AD7192, etc.), all of which require SPI.
This pre

iio: adc: ad_sigma_delta: allow COMPILE_TEST in isolation

AD_SIGMA_DELTA is a hidden tristate that can only be enabled by
selecting drivers (AD7124, AD7192, etc.), all of which require SPI.
This prevents compile-testing the library code directly with allmodconfig
or by manually enabling it with COMPILE_TEST.

Add a prompt string guarded by "if COMPILE_TEST" so the symbol becomes
directly selectable when COMPILE_TEST is set.

Also add an explicit "depends on SPI" since the ad_sigma_delta library
directly calls SPI core symbols such as spi_bus_lock(), spi_bus_unlock(),
and spi_sync_locked().

Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

Merge branch 'mm-stable-6d098029de09' of https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm into kho-scratch

Merge tag 'perf-tools-fixes-for-v7.2-1-2026-07-25' into perf-tools-next

perf tools fixes for v7.2.

- Update header copies of kernel headers, including const.h, fs.h,
perf_event.h, gfp_types.h, kv

Merge tag 'perf-tools-fixes-for-v7.2-1-2026-07-25' into perf-tools-next

perf tools fixes for v7.2.

- Update header copies of kernel headers, including const.h, fs.h,
perf_event.h, gfp_types.h, kvm.h, cpufeatures.h, rtnetlink.hp,
msr-index.h, drm.h and socket.h.

- Add some build files related to BPF skels to .gitignore.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

show more ...

BackMerge tag 'v7.2' into drm-next

Linux 7.2

There was a lot of conflicts this round between fixes and next,
and I'd like to get the merge resolutions that we have in drm-tip.

Signed-off-by: Dave

BackMerge tag 'v7.2' into drm-next

Linux 7.2

There was a lot of conflicts this round between fixes and next,
and I'd like to get the merge resolutions that we have in drm-tip.

Signed-off-by: Dave Airlie <airlied@redhat.com>

show more ...

mlx5: Deprecate latency-sensitive QPs feature

New HW no longer implements a separate class for latency-sensitive QPs
and advertises this by a new cap bit.

Signed-off-by: Leon Romanovsky <leon@kerne

mlx5: Deprecate latency-sensitive QPs feature

New HW no longer implements a separate class for latency-sensitive QPs
and advertises this by a new cap bit.

Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...