Merge branch 'for-6.20/sony' into for-linus

- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.19-rc1

Cross-merge BPF and other fixes after downstream PR.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync-up some display code needed for Async flips refactor.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.20 (7.0?) release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates

Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:

- lots of IIO driver updates, cleanups, and additions

- large interconnect driver changes as they get converted over to a
dynamic system of ids

- coresight driver updates

- mwave driver updates

- binder driver updates and changes

- comedi driver fixes now that the fuzzers are being set loose on
them

- nvmem driver updates

- new uio driver addition

- lots of other small char/misc driver updates, full details in the
shortlog

All of these have been in linux-next for a while now"

* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...

show more ...

Merge tag 'iio-for-6.19a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features and cleanup for 6.19

The usual bunc

Merge tag 'iio-for-6.19a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features and cleanup for 6.19

The usual bunch of new device support, but also quite a bit of cleanup
of the core and older drivers which is always good to see.

New device support
------------------

adi,ad4080
- Add support for AD4081, AD4083, AD4084, AD4086 and AD4087 ADCs with
slightly different features to existing supported parts (max CNV clock
count, resolution etc)
adi,adxl380
- Add support for ADXL318 and ADXL319 which have reduced functionality
compared to other supported parts, particularly around event detection.
aosong,adp810
- New driver for this differential pressure and temperature sensor.
aspeed,adc
- Add support for the AST2700 SoC ADCs which differ in small ways from
already supported parts.
bosch,sm330
- New driver for this IMU (accelerometer + gyroscop) with I2C and SPI bus
support.
invensense,icm45600
- New driver for this family of IMUs with sub drivers for accelerometer
and gyroscope elements. I2C, I3C and SPI busses all supported.
* Supports ICM45605, ICM45606, ICM45608, ICM45634, ICM45686, ICM45687,
ICM45688P, ICM45689.
* Support basic features and FIFO.
maxim,max14001
- New driver for the MAX14001 and MAX14002 ADCs.
renesas,rzt2h
- New driver supporting the RZ/T2H and RZ/N2H ADCs found in various SoCs.
renesas,rznl
- New driver supporting the RZ/NL ADC found in various SoCs.

Features
--------

adi,ad5446
- Add a DT binding doc for the 29 variants currently covered by the driver.
- Add adi,ad5542 which is compatiable with the adi,ad5542a which was
already supported.
bosch,bma220
- I2C support including an I2C bus watchdog.
- Power supply control
- Data ready trigger.
- Low pass filter control.
- Debugfs register access.
- Add Petre Rodan as a maintainer of this driver (thanks!)
bosch,bmi270
- Add support for motion events.
fsl,mpl3115
- Add a dataready trigger and related sampling frequency control.
- Add threshold events.
infineon,dps310
- Add a specific device tree binding.
maxim,max30100
- Allow control of LED pulse-width in dt-binding. Optimum value depends
on physical characteristics of the device which contains this sensor.
mediatek,mt2701
- Add dt compatible for the mt8189.
rockchip,saradc
- Add rk3506 compatible which is functionally the same as the already
supported rk3528 (which is therefore the fallback)
st,lsm6dsx
- Make sampling more flexible when both fifo and events are of interest
by decoupling the FIFO fill rate from actual sampling.

Cleanup and minor fixes
-----------------------

core
- Document and add might_sleep() to iio_push_to_buffers_with_ts_unaligned()
as it allocates a buffer, typically just on 1st call.
- Add documentation for iio_push_to_buffers_with_ts() which is being used
to replace iio_push_to_buffers_with_timestamp() in new code as it
validates the buffer size. Make the deprecation of the old function
clear.
- Document that the store_to() callback in struct iio_buffer_access_funcs
may be called from contexts that cannot sleep.
- Document that the cb() provided to a callback buffer may be called
from contexts that cannot sleep.
- Cleanup up industrialio-backend.c comments.
- Call mutex_destroy() in cleanup of buffers.
- Call device_initialize() later to avoid having to call device_put()
before configuration is otherwise complete.
- Use mutex_init_with_key() to replace opencoded version.
- Use dma_buf_unmap_attachment_unlocked() to replace opencoded version.
- Reorder Makefile for pressure sensors.
various
- Uses sysfs_emit() to replace sprintf() in read_label() and other
callbacks that typically are used to write data to sysfs buffers.
- Switch to REGCACHE_MAPLE in various drivers.
adi,docs
- Fix up formatting of cross references and other kernel-doc issues.
adi,ad4080
- Fix wrong masking of product IDs.
adi,ad5446
- Use DMA safe buffers as needed for SPI.
- Drop a duplicate device chip specific data structure where two parts
are functionally identical.
- Fail probe if reference is not available.
- Split up the massive array of chip type specific structures into
separate structures as this tends to be easier to read and maintain.
- Add explicit of_device_id entries for all supported parts.
- Split I2C and SPI parts away from core to avoid ifdef complexity.
- Switch to devm_mutex_init().
- Make use of guard() to simplify code.
- Applying IWYU principles and reorder headers.
- Various other minor cleanup.
adi,ad7124
- Add debugfs to support single cycle mode, typically only used for cases
such as validate performance of the ADC.
- Various other minor cleanup including removing some layers of indirection
that weren't necessary.
- Add extended attributes to the temperature channel which follows the same
signal path as other channels.
- Replace the setup register allocation strategy with a simpler more
predictable one (a fix for OOB from this code follows later in this pull
request).
adi,adxl345
- Ensure dt-binding allows for both interrupt wired at the same time.
arm,scmi
- Replace const_ilog2() with the resulting value which ends up simpler
to read.
bosch,bma220
- Add correct SPI mode specification to the device tree binding.
- Fix up interrupt type in dt binding example to match that the driver
expects.
- Relax hard constraint on matching chip ID with a message only so as to
enable fallback DT compatibles to work.
- Use local struct device *dev to replaces lots of indirect look ups.
- Improve includes on approximate IWYU basis.
- Explicit of_match_table.
- Reset some registers during probe.
- Move to regmap.
- Ensure a timestamp is available when filling the buffer by using a
locally acquired one rather than relying on trigger top half running.
- Add a utility function to search value pair tables for a match.
- Various other minor improvements.
- Move code to avoid a false dependency of the core code on the I2C module.
bosch,bma400
- Improve register and field naming + organization. Use with FIELD_GET()
and FIELD_PREP() to allow dropping of shift defines.
- Use macros to define event related fields.
- Switch to an address lookup based on an index variable to replace lots of
very similar register macros.
- Rename activity_event_en() to generic_event_en() to better reflect what
it does.
- Improve comments around interrupt register handling.
fsl,mpl3115
- Factor out code for triggered buffer data collection.
- Use more consistent register field naming style.
- Use get_unaligned_be24() to get the pressure.
invensense,mpu6050
- Drop false requirement in DT binding for the interrupt. The driver will
be able to do less if one is not provided, but some features are still
available.
invensense,icm45600_i3c
- Fix missing return on failure to match part.
linear,ltc2688
- Use devm_mutex_init() so mutex_destroy() is called in tear down path.
- Use guard() to simplify lock handling in error return paths.
qcom,vadc
- Fix up some kernel-doc related warnings.
rohm,bd79112 and bd79124
- Use regmap_reg_range() helper to set the ranges.
st,lsm6dsx
- Fix units of ODR in structure documentation.
ti,am335x
- Add range checks to avoid a compiler warning.
ti,pac1934
- Switch to system_percpu_wq.

Various other minor typo fixes etc.

* tag 'iio-for-6.19a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (150 commits)
staging: iio: adt7316: replace sprintf() with sysfs_emit()
iio: pressure: Arrange Makefile alphabetically
iio: ABI: document pressure event attributes
iio: mpl3115: add threshold events support
iio: mpl3115: use get_unaligned_be24() to retrieve pressure data
iio: buffer: use dma_buf_unmap_attachment_unlocked() helper
iio: core: Replace lockdep_set_class() + mutex_init() by combined call
iio: core: Clean up device correctly on iio_device_alloc() failure
iio: core: add missing mutex_destroy in iio_dev_release()
iio: accel: adxl380: add support for ADXL318 and ADXL319
dt-bindings: iio: accel: adxl380: add new supported parts
iio: imu: inv_icm45600: Initializes inv_icm45600_buffer_postdisable() sleep
iio: adc: pac1934: replace use of system_wq with system_percpu_wq
iio: dac: ad5446: Add AD5542 to the spi id table
iio: dac: ad5446: Fix coding style issues
iio: dac: ad5446: Refactor header inclusion
iio: dac: ad5446: Make use of the cleanup helpers
iio: dac: ad5446: Make use of devm_mutex_init()
iio: dac: ad5446: Separate I2C/SPI into different drivers
iio: dac: ad5456: Add missing DT compatibles
...

show more ...

iio: accel: bma220: add i2c module

Add the bma220_i2c module.

Note that this kernel module transparently shifts all register addresses
1 bit to the left, so all functions will operate based on the

iio: accel: bma220: add i2c module

Add the bma220_i2c module.

Note that this kernel module transparently shifts all register addresses
1 bit to the left, so all functions will operate based on the SPI memory
map.

Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: accel: bma220: split original driver

In preparation for the i2c module, move the original code into multiple
source files without any other functional change.

Create the additional bma220_core

iio: accel: bma220: split original driver

In preparation for the i2c module, move the original code into multiple
source files without any other functional change.

Create the additional bma220_core module which currently is not
providing an abstracted bus type (this will change with the regmap
patch).
Fix a few includes in the context of this patch.

Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge tag 'v6.12-rc3' into perf-tools-next

To get the fixes in the current perf-tools tree.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge tag 'v6.12-rc1' into clk-meson-next

Linux 6.12-rc1

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to resolve a conflict with core locally.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to up v6.12-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync to v6.12-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'for-6.13/wacom' into for-linus

- Sanitization of BTN_TOOL_RUBBER handling (Jason Gerecke)

Merge remote-tracking branch 'torvalds/master' into perf-tools

To pick up changes in other trees that may affect perf, such as libbpf
and in general the header files that perf has copies of, so that

Merge remote-tracking branch 'torvalds/master' into perf-tools

To pick up changes in other trees that may affect perf, such as libbpf
and in general the header files that perf has copies of, so that we can
do the sync with the kernel sources.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...