Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:

- fix DesignWare driver ENABLE-ABORT sequence, ensuring A

Merge tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:

- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed

- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate

- KEBA driver Kconfig dependency fix

- fix XIIC driver power suspend sequence

* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled

show more ...

Merge tag 'i2c-host-fixes-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

I2C host fixes for v6.12-rc1

The DesignWare driver now has the correct ENA

Merge tag 'i2c-host-fixes-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

I2C host fixes for v6.12-rc1

The DesignWare driver now has the correct ENABLE-ABORT sequence,
ensuring ABORT can always be sent when needed.

In the SynQuacer controller we now check for PCLK as an optional
clock, allowing ACPI to directly provide the clock rate.

The recent KEBA driver required a dependency fix in Kconfig.

The XIIC driver now has a corrected power suspend sequence.

show more ...

i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled

It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
a

i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled

It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.

Fixes: 36ecbcab84d0 ("i2c: xiic: Implement power management")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge tag 'i2c-for-6.11-final-but-missed-it' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"The Aspeed driver tracks the controller's state (stop, pen

Merge tag 'i2c-for-6.11-final-but-missed-it' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"The Aspeed driver tracks the controller's state (stop, pending, start,
etc.). Previously, when the stop command was sent, the state was not
updated. The fix ensures the driver's state is aligned with the device
status.

The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement was
missing the else, causing it to move forward instead of exiting the
function in case of an error.

The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the IRQ
setup to prevent unwanted interrupts during probe.

The Xilinx XPS controller fixes TX FIFO handling to avoid missed NAKs.
Another fix ensures the controller is reinitialized when the bus
appears busy"

* tag 'i2c-for-6.11-final-but-missed-it' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq()
i2c: isch: Add missed 'else'
i2c: xiic: Try re-initialization on bus busy timeout
i2c: xiic: Wait for TX empty to avoid missed TX NAKs
i2c: aspeed: Update the stop sw state when the bus recovery occurs

show more ...

Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

The Aspeed driver tracks the controller's state (stop, pending,
start, etc.

Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

The Aspeed driver tracks the controller's state (stop, pending,
start, etc.). Previously, when the stop command was sent, the
state was not updated. The fix in this pull request ensures the
driver's state is aligned with the device status.

The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement
was missing the else, causing it to move forward instead of
exiting the function in case of an error.

The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the
IRQ setup to prevent unwanted interrupts during probe.

The Xilinx XPS controller fixes TX FIFO handling to avoid missed
NAKs. Another fix ensures the controller is reinitialized when
the bus appears busy.

show more ...

i2c: xiic: Try re-initialization on bus busy timeout

In the event that the I2C bus was powered down when the I2C controller
driver loads, or some spurious pulses occur on the I2C bus, it's
possible

i2c: xiic: Try re-initialization on bus busy timeout

In the event that the I2C bus was powered down when the I2C controller
driver loads, or some spurious pulses occur on the I2C bus, it's
possible that the controller detects a spurious I2C "start" condition.
In this situation it may continue to report the bus is busy indefinitely
and block the controller from working.

The "single-master" DT flag can be specified to disable bus busy checks
entirely, but this may not be safe to use in situations where other I2C
masters may potentially exist.

In the event that the controller reports "bus busy" for too long when
starting a transaction, we can try reinitializing the controller to see
if the busy condition clears. This allows recovering from this scenario.

Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Cc: <stable@vger.kernel.org> # v2.6.34+
Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

show more ...

i2c: xiic: Wait for TX empty to avoid missed TX NAKs

Frequently an I2C write will be followed by a read, such as a register
address write followed by a read of the register value. In this driver,
wh

i2c: xiic: Wait for TX empty to avoid missed TX NAKs

Frequently an I2C write will be followed by a read, such as a register
address write followed by a read of the register value. In this driver,
when the TX FIFO half empty interrupt was raised and it was determined
that there was enough space in the TX FIFO to send the following read
command, it would do so without waiting for the TX FIFO to actually
empty.

Unfortunately it appears that in some cases this can result in a NAK
that was raised by the target device on the write, such as due to an
unsupported register address, being ignored and the subsequent read
being done anyway. This can potentially put the I2C bus into an
invalid state and/or result in invalid read data being processed.

To avoid this, once a message has been fully written to the TX FIFO,
wait for the TX FIFO empty interrupt before moving on to the next
message, to ensure NAKs are handled properly.

Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Cc: <stable@vger.kernel.org> # v2.6.34+
Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

show more ...

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"The I2C core gains documentation updates for the testunit, a cleanup

Merge tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"The I2C core gains documentation updates for the testunit, a cleanup
regarding unneeded 'driver_data' and more sanity checks in the char
device.

For the host drivers, this release includes significant updates, with
the primary change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.

New Support:

- Added support for Intel Arrow Lake-H
- Added I2C support in the Arioha SoC by linking the Mediatek I2C
controller

Cleanups:

- Added the MODULE_DESCRIPTION() macro, resolving a modpost warning
in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by removing
unnecessary semicolons after brackets.

General improvements:

- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during suspend()
before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for spurious
interrupts.

DTS Changes:

- Removed address-cell and size-cell from the Atmel at91sam, nVidia
Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with the
i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.

AT24 EEPROM driver changes:

- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)"

* tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (87 commits)
i2c: document new callbacks in i2c_algorithm
dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
dt-bindings: i2c: at91: Add sama7d65 compatible string
i2c: st: reword according to newest specification
i2c: cpm: reword according to newest specification
i2c: virtio: reword according to newest specification
i2c: nvidia-gpu: reword according to newest specification
i2c: viai2c: reword according to newest specification
i2c: viperboard: reword according to newest specification
i2c: uniphier: reword according to newest specification
i2c: uniphier-f: reword according to newest specification
i2c: tiny-usb: reword according to newest specification
i2c: thunderx-pcidrv: reword according to newest specification
i2c: tegra-bpmp: reword according to newest specification
i2c: taos-evm: reword according to newest specification
i2c: sun6i-p2wi: reword according to newest specification
i2c: stm32f4: reword according to newest specification
i2c: sprd: reword according to newest specification
i2c: sis5595: reword according to newest specification
i2c: rzv2m: reword according to newest specification
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'i2c-host-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

This release includes significant updates, with the primary
change being the rena

Merge tag 'i2c-host-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

This release includes significant updates, with the primary
change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.

New Support:

- Added support for Intel Arrow Lake-H.
- Added I2C support in the Arioha SoC by linking the Mediatek
I2C controller.

Cleanups:

- Added the MODULE_DESCRIPTION() macro, resolving a modpost
warning in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by
removing unnecessary semicolons after brackets.

General improvements:

- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during
suspend() before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for
spurious interrupts.

DTS Changes:

- Removed address-cell and size-cell from the Atmel at91sam,
nVidia Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with
the i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string
thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.

show more ...

i2c: xiic: improve error message when transfer fails to start

xiic_start_xfer can fail for different reasons:

- EBUSY: bus is busy or i2c messages still in tx_msg or rx_msg
- ETIMEDOUT: timed-out t

i2c: xiic: improve error message when transfer fails to start

xiic_start_xfer can fail for different reasons:

- EBUSY: bus is busy or i2c messages still in tx_msg or rx_msg
- ETIMEDOUT: timed-out trying to clear the RX fifo
- EINVAL: wrong clock settings

Both EINVAL and ETIMEDOUT will currently print a specific error
message followed by a generic one, for example:

Failed to clear rx fifo
Error xiic_start_xfer

however EBUSY will simply output the generic message:

Error xiic_start_xfer

which is not really helpful.

This commit adds a new error message when a busy condition is detected
and also removes the generic message since it does not provide any
relevant information to the user.

Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

show more ...