Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'hwmon-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
"New drivers:
- Kandou KB9002 retimer
- PolarFire SoC t

Merge tag 'hwmon-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
"New drivers:
- Kandou KB9002 retimer
- PolarFire SoC temp/voltage sensor
- Eswin EIC7700 PVT sensor
- PMBus:
- Analog Devices MAX16545/MAX16550 and Volterra VT7505
- Monolithic MPQ82D00 and MPQ8646
- Silergy SQ24860

Added support to existing drivers:
- asus-ec-sensors: Support for ROG STRIX Z390-E GAMING, ProArt
Z690-CREATOR WIFI, ROG STRIX X870E-E GAMING WIFI7 R2, ROG CROSSHAIR
X870E HERO, and ROG Maximus Z790 Hero
- asus_rog_ryujin: Siupport for ROG Ryujin III
- ina2xx: Support for INA232
- k10temp: Per-CCD temperature monitoring for Zen5 Turin
- nct6775: List NCT5585D as supported chip
- nzxt-kraken3: Support for NZXT Kraken 2024 Elite
- sht3x: Support for GXCAS GXHT30
- tmp102: Add device IDs for TMP110 and TMP113
- yogafan: Support for LOQ 15IAX9, XiaoXin Pro 13ARE 2020, IdeaPad 3
15ALC6, Legion Pro 7 16AFR10H, Yoga Pro 7 14IAH10, Yoga 7 16ARP8,
and Lenovo LOQ 15IAX9
- PMBus:
- max20830: Support for max20830c and max20840c
- max34440: Support for MAX34452, and support for newer version of
max34451
- adm1275: Support for ROHM BD12780 and BD12790

Other notable changes:
- Constify various device attributes
- Remove redundant dev_err() and dev_err_probe() from various drivers
- applesmc: Convert to hwmon_device_register_with_info
- adt7470: Add thermal zone sensor support
- coretemp: Fix core_data leak on CPUs without PTS
- emc1403: Drop hysteresis for low limit temperature
- max6621: Fix various over- and underflow problems
- PMBus:
- Introduce pmbus_read_smbus_i2c_block_data() and use it in
various drivers
- Export and use pmbus_check_and_notify_faults()
- Let PMBus drivers report the supported PMBus revision

Various other minor fixes and improvements"

* tag 'hwmon-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (110 commits)
hwmon: (emc1403) Drop hysteresis for low limit temperature
hwmon: (coretemp) Fix core_data leak on CPUs without PTS
hwmon: (max6621) fix negative temperature offset and crit readings
hwmon: (max6621) fix temperature clamp range
hwmon: (asus_rog_ryujin) Add ROG Ryujin III White Edition
hwmon: (asus_rog_ryujin) Add ROG Ryujin III support
hwmon: (asus_rog_ryujin) Add per-device configuration
hwmon: (k10temp) Add per-CCD temperature monitoring for Zen5 Turin
hwmon: (tmp102) Add TMP113 device ID
hwmon: (tmp102) Add TMP110 device ID
hwmon: (nct6775) Add NCT5585D to list of supported chips
Documentation: hwmon: (nct6775) Add missing NCT6797D and NCT6798D
hwmon: (emc1403) Add regulator support
hwmon: (emc1403) Convert to use OF bindings
dt-bindings: hwmon: Document SMSC EMC1402/1403/1404/1428
hwmon: (asus-ec-sensors) add ROG STRIX Z390-E GAMING
hwmon: (sysfs) Allow drivers to register const attributes
hwmon: (corsair-psu) Update documentation
hwmon: (core) Use const APIs for the dynamically allocated sysfs attributes
hwmon: (core) Constify device attributes
...

show more ...

hwmon: Driver for the temp/voltage sensor on PolarFire SoC

Add a driver for the temperature and voltage sensors on PolarFire SoC.
The temperature reports how hot the die is, and the voltages are the

hwmon: Driver for the temp/voltage sensor on PolarFire SoC

Add a driver for the temperature and voltage sensors on PolarFire SoC.
The temperature reports how hot the die is, and the voltages are the
SoC's 1.05, 1.8 and 2.5 volt rails respectively.

The hardware supports alarms in theory, but there is an erratum that
prevents clearing them once triggered, so no support is added for them.

The hardware measures voltage with 16 bits, of which 1 is a sign bit and
the remainder holds the voltage as a fixed point integer value. It's
improbable that the hardware will work if the voltages are negative, so
the driver ignores the sign bits.

There's no dt support etc here because this is the child of a simple-mfd
syscon.

Signed-off-by: Lars Randers <lranders@mail.dk>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260629-wriggle-headscarf-c85a4070dddb@spud
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

show more ...