Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'hid-for-linus-2026081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:
"Core:
- fix long-standing force-feedback initialization race acr

Merge tag 'hid-for-linus-2026081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:
"Core:
- fix long-standing force-feedback initialization race across the
subsystem (Dmitry Torokhov)
- switch to system_dfl_wq (Marco Crivellari)

AMD-SFH:
- support for tablet-mode switch for AMD SFH-based systems (Basavaraj
Natikar)

HyperX:
- support for HyperX QuadCast 2 (Benjamin Blume)

I2C-HID:
- support for devices that provide HID descriptor solely through
the ACPI _DSM method (XIE Zhibang)

Intel-THC-HID:
- support for full I2C bus config parameters (Even Xu)

Logitech:
- HID++ 2.0 repogrammable button support (Elliot Douglas)
- Bolt receiver support for HID++ devices (Erik Håkansson)

MSI:
- support for MSI Claw (Derek J. Clark)

Steam:
- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)

And many, many other fixes for various long standing issues that were
found by new modern tools, and quite a few device ID additions"

* tag 'hid-for-linus-2026081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (146 commits)
HID: tmff: Use 64-bit arithmetic for force feedback scaling
HID: multitouch: reclassify HTIX5288 to WIN_8_FORCE_MULTI_INPUT_NSMU
HID: sensor: custom: Fix field sysfs group cleanup on failure
HID: sensor: custom: Fix use-after-free in enable_sensor
HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer
HID: haptic: don't write an uninitialized value to unhandled usages
HID: intel-thc-hid: intel-quickspi: fix autosuspend cleanup during teardown
HID: intel-thc-hid: intel-quicki2c: fix autosuspend cleanup during teardown
HID: steam: Zero out inputs when disabling gamepad mode
HID: steam: Clean up locking
HID: steam: Don't set feature reports when disconnecting
HID: steam: Fix wording of connect/disconnect logs
HID: steam: Initial 2026 Steam Controller support
HID: steam: Refactor registration
HID: logitech: add Bolt receiver support for Logitech HID++ devices
HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature
HID: universal-pidff: stop the device when force-feedback init fails
HID: haptic: move FF initialization into .input_configured()
HID: logitech-hidpp: move FF initialization to .input_configured()
HID: megaworld: move FF initialization to .input_configured()
...

show more ...

Merge branch 'for-7.3/i2c-hid' into for-linus

- add support for devices that provide HID descriptor solely through ACPI _DSM
method (XIE Zhibang)

HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver

Move the _DSM call that gets the HID descriptor address from
i2c-hid-acpi.c into i2c-hid-acpi.h as a static inline so both the

HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver

Move the _DSM call that gets the HID descriptor address from
i2c-hid-acpi.c into i2c-hid-acpi.h as a static inline so both the ACPI
and the new PRP0001 driver can use it. While refactoring, move the
blacklist check and the _DSM call to the top of probe() to avoid a
pointless alloc when the device is blacklisted or does not implement the
_DSM.

Some devices, for example the Lenovo KaiTian N60d and Inspur CP300L3,
are declared with _HID "PRP0001" and _DSD compatible "hid-over-i2c" but
lack "hid-descr-addr" from the _DSD and provide the HID descriptor
address only through an ACPI _DSM. The OF driver fails to probe them
because it requires hid-descr-addr. Add a new driver that handles these
devices by calling the shared _DSM helper.

Link: https://lore.kernel.org/tencent_F6FC553D1BB737FC00062AD0FEF43C580F0A@qq.com
Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules")
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 6.1 merge window.

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'for-6.1/nvdimm' into libnvdimm-for-next

Add v6.1 content on top of some straggling updates that missed v6.0.

Merge branch 'mlx5-vfio' into mlx5-next

Merge net/mlx5 dependencies for device DMA logging.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

Merge branch 'for-6.0/dax' into libnvdimm-fixes

Pick up another "Soft Reservation" fix for v6.0-final on top of some
straggling nvdimm fixes that missed v5.19.

Merge tag 'v6.0-rc6' into locking/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-misc-next

We need 6.0-rc1 to merge the backlight rework PR.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'am5748-fix' into fixes

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
q

Merge branch 'linus' into x86/mm, to refresh the branch

This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
queueing up new commits.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'sched/warnings' into sched/core, to pick up WARN_ON_ONCE() conversion commit

Merge in the BUG_ON() => WARN_ON_ONCE() conversion commit.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.

Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove
runtime info pri

Merge drm/drm-next into drm-intel-next

Sync drm-intel-next with v6.0-rc as well as recent drm-intel-gt-next.

Since drm-next does not have commit f0c70d41e4e8 ("drm/i915/guc: remove
runtime info printing from time stamp logging") yet, only
drm-intel-gt-next, will need to do that as part of the merge here to
build.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus

Merge branch 'i2c/make_remove_callback_void-immutable' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next

Sync up with the latest I2C code base to get updated prototype of I2C
bus remove() method.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging for v6.0-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:

- support for AMD SOCs using SFH1.1 memory access (Basavaraj Natikar)

Merge tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:

- support for AMD SOCs using SFH1.1 memory access (Basavaraj Natikar)

- XP-PEN Deco L support (José Expósito)

- support for Elan eKTH6915 touchscreens (Douglas Anderson)

- other small assorted fixes and device ID additions

* tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (39 commits)
HID: amd_sfh: Handle condition of "no sensors"
HID: amd_sfh: Fix implicit declaration error on i386
HID: apple: Add "GANSS" to the non-Apple list
HID: alps: Declare U1_UNICORN_LEGACY support
HID: wacom: Force pen out of prox if no events have been received in a while
HID: nintendo: Add missing array termination
HID: lg-g15: Fix comment typo
HID: amd_sfh: Implement SFH1.1 functionality
HID: amd_sfh: Move interrupt handling to common interface
HID: amd_sfh: Move amd_sfh_work to common interface
HID: amd_sfh: Move global functions to static
HID: amd_sfh: Add remove operation in amd_mp2_ops
HID: amd_sfh: Add PM operations in amd_mp2_ops
HID: amd_sfh: Add descriptor operations in amd_mp2_ops
HID: amd_sfh: Move request_list variable to client data
HID: amd_sfh: Move request_list struct to header file
HID: amd_sfh: Move common macros and structures
HID: amd_sfh: Add NULL check for hid device
HID: core: remove unneeded assignment in hid_process_report()
ID: intel-ish-hid: hid-client: drop unexpected word "the" in the comments
...

show more ...

Merge branch 'for-5.20/elan' into for-linus

- support for Elan eKTH6915 touchscreens (Douglas Anderson)

HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens

Like many i2c-hid touchscreen controllers, the Elan eKTH6915 has a
reset GPIO hooked up to it. According to the datasheet, the

HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens

Like many i2c-hid touchscreen controllers, the Elan eKTH6915 has a
reset GPIO hooked up to it. According to the datasheet, the way we're
supposed to turn the touchscreen on is:

1. Turn on the 3.3V supply.
2. Turn on the IO supply. It's OK if this is hardwired to the 3.3V
supply, but if it's not then it must be turned on _after_ the 3.3V
supply.
3. Wait >= 1 ms.
4. Deassert the reset GPIO (reset GPIO is active low, so there would
be a leakage path if this was deasserted _before_ the IO supply).
5. Wait 300 ms.

Much of the above can be handled by the generic i2c-hid-of driver, but
the "reset" GPIO is not supported by that driver. Thus we'll do the
same as we did for Goodix and add a new tiny driver that uses the
i2c-hid core.

NOTE: support for this new touchscreen could theorically fit into the
Goodix driver. I've made it a separate driver because the Elan driver
supports _two_ regulators and it's unclear exactly how that would fit
in with commit 18eeef46d359 ("HID: i2c-hid: goodix: Tie the reset line
to true state of the regulator").

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.13 merge window.

Merge tag 'v5.12-rc7' into ecryptfs/next

Required to pick up idmapped mount changes which changed some function
parameters.

Merge tag 'v5.12-rc4' into next

Sync up with the mainline to bring in newest APIs.