Merge drm/drm-next into drm-xe-next

Sync some i915/display changes

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get drm-misc-next to v7.2-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>> without that bound. Resolve by adding 'static
as a supertrait to DriverObject and DeviceContext, which does not
restrict any current use cases since DriverObject is always implemented
on owned, refcounted types and DeviceContext is a sealed marker trait
with only unit-type implementors.

If DriverObject (or DeviceContext) ever becomes lifetime-parameterized
(e.g. via a GAT for TTM backed objects), the 'static supertrait can be
relaxed at that point.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

show more ...

Merge tag 'hid-for-linus-2026081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:
"Core:
- fix long-standing force-feedback initialization race acr

Merge tag 'hid-for-linus-2026081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:
"Core:
- fix long-standing force-feedback initialization race across the
subsystem (Dmitry Torokhov)
- switch to system_dfl_wq (Marco Crivellari)

AMD-SFH:
- support for tablet-mode switch for AMD SFH-based systems (Basavaraj
Natikar)

HyperX:
- support for HyperX QuadCast 2 (Benjamin Blume)

I2C-HID:
- support for devices that provide HID descriptor solely through
the ACPI _DSM method (XIE Zhibang)

Intel-THC-HID:
- support for full I2C bus config parameters (Even Xu)

Logitech:
- HID++ 2.0 repogrammable button support (Elliot Douglas)
- Bolt receiver support for HID++ devices (Erik Håkansson)

MSI:
- support for MSI Claw (Derek J. Clark)

Steam:
- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)

And many, many other fixes for various long standing issues that were
found by new modern tools, and quite a few device ID additions"

* tag 'hid-for-linus-2026081901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (146 commits)
HID: tmff: Use 64-bit arithmetic for force feedback scaling
HID: multitouch: reclassify HTIX5288 to WIN_8_FORCE_MULTI_INPUT_NSMU
HID: sensor: custom: Fix field sysfs group cleanup on failure
HID: sensor: custom: Fix use-after-free in enable_sensor
HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer
HID: haptic: don't write an uninitialized value to unhandled usages
HID: intel-thc-hid: intel-quickspi: fix autosuspend cleanup during teardown
HID: intel-thc-hid: intel-quicki2c: fix autosuspend cleanup during teardown
HID: steam: Zero out inputs when disabling gamepad mode
HID: steam: Clean up locking
HID: steam: Don't set feature reports when disconnecting
HID: steam: Fix wording of connect/disconnect logs
HID: steam: Initial 2026 Steam Controller support
HID: steam: Refactor registration
HID: logitech: add Bolt receiver support for Logitech HID++ devices
HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature
HID: universal-pidff: stop the device when force-feedback init fails
HID: haptic: move FF initialization into .input_configured()
HID: logitech-hidpp: move FF initialization to .input_configured()
HID: megaworld: move FF initialization to .input_configured()
...

show more ...

Merge branch 'for-7.3/hyperx' into for-linus

- support for HyperX QuadCast 2 (Benjamin Blume)

Merge branch 'for-7.3/msi' into for-linus

- support for MSI Claw (Derek J. Clark)

Merge branch 'for-7.3/roccat' into for-linus

- memory management fix on device cleanup path (Xu Rao)
- profile index handling fix (Michael Bommarito)

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
dro

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
drop the unused initializer in the platform_device_id table for
sh_mtu2 (Uwe Kleine-König)

- Remove redundant dev_err()/dev_err_probe() messages when
devm_request_*_irq() fails, as the helper already logs an error
message (Pan Chuang)

- Fix a boot hang on Allwinner D1 when a forced minimum delta is used
with the sun4i timer (Felix Yan)

- Fix an IRQ leak in the cpuhp_setup_state() error path by freeing the
IRQ on failure in the NXP PIT driver (WenTao Liang)

- Fix incorrect unmapping of shared MMIO between the clocksource and
clockevent drivers. If one of them fails to initialize, the error
path unmaps the shared MMIO region, leaving the other driver with an
invalid mapping on clps711x (Guangshuo Li)

- Make the samsung_pwm driver compatible with PREEMPT_RT by replacing
regular spinlocks with raw_spinlock_t in atomic contexts (Marek
Szyprowski)

- Use __raw_readl() and __raw_writel() instead of ioread32() and
iowrite32() to support SWAP_IO_SPACE in the rtl-otto driver (Rustam
Adilov)

- Fix a missing clk_disable_unprepare() call in the timer
initialization error path of the Armada driver (Yuho Choi)

Link: https://lore.kernel.org/lkml/75feea31-683d-45a1-87f4-ab045e0152ae@oss.qualcomm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.3 merge window.

HID: hid-msi: Add MSI Claw configuration driver

Adds configuration HID driver for the MSI Claw series of handheld PC's.
In this initial patch add the initial driver outline and attributes for
changi

HID: hid-msi: Add MSI Claw configuration driver

Adds configuration HID driver for the MSI Claw series of handheld PC's.
In this initial patch add the initial driver outline and attributes for
changing the gamepad mode, M-key behavior, and add a WO reset function.

Sending the SWITCH_MODE and RESET commands causes a USB disconnect in
the device. The completion will therefore never get hit and would trigger
an -EIO. To avoid showing the user an error for every write to these
attrs a bypass for the completion handling is introduced when timeout ==
0.

The initial version of this patch was written by Denis Benato, which
contained the initial reverse-engineering and implementation for the
gamepad mode switching. This work was later expanded by Zhouwang Huang
to include more gamepad modes. Finally, I refactored the drivers data
in/out flow and overall format to conform to kernel driver best
practices and style guides. Claude was used as an initial reviewer of
this patch.

Assisted-by: Claude:claude-sonnet-4-6
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Co-developed-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

show more ...

HID: hyperx: add driver for the HyperX QuadCast 2 mute button

The tap-to-mute button of the HyperX QuadCast 2 (03f0:07b4) is handled
entirely in the device firmware. The firmware gates the audio in

HID: hyperx: add driver for the HyperX QuadCast 2 mute button

The tap-to-mute button of the HyperX QuadCast 2 (03f0:07b4) is handled
entirely in the device firmware. The firmware gates the audio internally
but never sends the Telephony "Phone Mute" usage (0x2f) that its own report
descriptor advertises, and it does not touch the UAC feature unit either.
Consequently neither an evdev key event nor an ALSA mixer change is ever
generated, and userspace has no way to learn that the microphone was muted:
desktops keep showing the microphone as live, and conferencing applications
keep displaying an unmuted microphone while transmitting silence.

The mute state is reported through a vendor-defined collection instead:

06 c0 ff Usage Page (Vendor-Defined 0xFFC0)
a1 01 Collection (Application)
06 c1 ff Usage Page (Vendor-Defined 0xFFC1)
85 77 Report ID (0x77)
09 f0 Usage (0xF0)
75 08 95 3f Report Size (8), Report Count (63)
81 02 Input (Data,Var,Abs)

Pressing the button emits a 64-byte report on that collection:

77 06 00 00 ... microphone unmuted
77 06 01 00 ... microphone muted

where byte 1 identifies the mute event and byte 2 carries the resulting
state. As the payload is an opaque vendor blob carrying no HID usages,
hid-input cannot map it and a hwdb entry cannot express it either.

Add a driver that decodes the report and emits KEY_MICMUTE, which makes the
button behave like any other microphone mute key.

Note that the device reports the resulting absolute state, whereas
KEY_MICMUTE is a momentary key that userspace acts on as a toggle, so the
driver emits one keypress per state change.

Tested on a HyperX QuadCast 2 (03f0:07b4).

Signed-off-by: Benjamin Blume <benjaminblume@posteo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

show more ...

HID: hyperv: add KUnit coverage for device info bounds

Add KUnit coverage for Hyper-V synthetic HID initial device-info parsing.
The tests cover zero bLength, a valid descriptor plus report descript

HID: hyperv: add KUnit coverage for device info bounds

Add KUnit coverage for Hyper-V synthetic HID initial device-info parsing.
The tests cover zero bLength, a valid descriptor plus report descriptor,
and a malformed report descriptor length that exceeds the received
message.

The same-translation-unit test uses a KUnit-only ACK bypass so parser
coverage does not require a live VMBus channel.

Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

show more ...

HID: rapoo: fix missing hid_is_usb() check

to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actual

HID: rapoo: fix missing hid_is_usb() check

to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.

Add a dependency on USB_HID for hid_is_usb(), as other HID drivers do; the
alternative would be to provide a simple stub implementation on !USB_HID
builds.

I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue.

Fixes: b3b1c68fb726 ("HID: rapoo: Add support for side buttons on RAPOO 0x2015 mouse")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

show more ...

Merge tag 'v7.2-rc3' into next

Sync up with mainline to pull in stable fixes to avoid merge conflicts.

HID: roccat: add KUnit test for kone profile-index bounds

Drive kone_keep_values_up_to_date() with a crafted switch-profile event;
an out-of-range value reads past profiles[] (KASAN slab-out-of-boun

HID: roccat: add KUnit test for kone profile-index bounds

Drive kone_keep_values_up_to_date() with a crafted switch-profile event;
an out-of-range value reads past profiles[] (KASAN slab-out-of-bounds on
an unpatched tree). A benign control with an in-range value exercises the
same path. The test object is sized to end at profiles[] so the over-read
lands in the KASAN redzone.

Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Pull in tag v7.2-rc1 so that drm-misc-fixes becomes useful again,
and drm-misc-next-fixes can be closed.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

Merge branch 'next' into for-linus

Prepare input updates for 7.2 merge window.

Merge commit '6beaec3aee9852438b89e4d7891caf5e84d45851' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current

This pulls in the merge commit for MFD updates for v7.2.

Merge commit '6beaec3aee9852438b89e4d7891caf5e84d45851' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current

This pulls in the merge commit for MFD updates for v7.2. The PR contains
a build-time dependency of one of the GPIO commits that will follow.

show more ...

Merge tag 'hid-for-linus-2026061601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:
"Core:
- semantic cleanup fixes for 'hid_device_id::driver_data'

Merge tag 'hid-for-linus-2026061601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:
"Core:
- semantic cleanup fixes for 'hid_device_id::driver_data' (Pawel
Zalewski)

Multitouch:
- UX improvement fixes for Yoga Book 9 (Dave Carey)

Logitech:
- fix for high resolution scrolling for Logitech HID++ 2.0 devices
(Lauri Saurus)

CP2112:
- fix for cp2112 firmware-based speed configuration, if available
(Danny Kaehn)

Wacom:
- memory corruption and scheduling while atomic and error fixes and
error handling fixes (Jinmo Yang, Myeonghun Pak)

New device support:
- OneXPlayer (Derek J. Clark)
- HORI Wireless Switch Pad (Hector Zelaya)
- Rakk Dasig X (Karl Cayme)

And other assorted small fixes and device ID additions"

* tag 'hid-for-linus-2026061601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (39 commits)
HID: hidpp: fix potential UAF in hidpp_connect_event()
HID: logitech-hidpp: sync wheel multiplier on wheel mode changes
HID: intel-thc-hid: intel-quickspi: reset touch IC on system resume
HID: uhid: convert to hid_safe_input_report()
HID: hid-goodix-spi: validate report size to prevent stack buffer overflow
HID: nintendo: add support for HORI Wireless Switch Pad
HID: multitouch: Honor ContactCount for Yoga Book 9 to suppress ghost contacts
HID: pidff: Use correct effect type in effect update
HID: wacom: stop hardware after post-start probe failures
HID: core: demote warning to debug level
HID: lenovo: Use KEY_PERFORMANCE capability for ThinkPad X12 Tab Gen 2
HID: lenovo: Add support for ThinkPad X13 Folio keyboard
HID: cp2112: Configure I2C bus speed from firmware
HID: cp2112: Add fwnode support
HID: hid-lenovo-go: cancel cfg_setup work in hid_go_cfg_remove()
HID: Input: Add battery list cleanup with devm action
HID: logitech-hidpp: remove excess kernel-doc member in hidpp_scroll_counter
HID: wacom: use cleanup.h for wacom_wac_queue_flush() buffer management
HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush()
HID: wacom: fix slab-out-of-bounds write in wacom_wac_queue_insert
...

show more ...

Merge branch 'for-7.2/oxp' into for-linus

- suport for OneXPlayer (Derek J. Clark)

Merge branch 'for-7.2/rakk' into for-linus

- support for Rakk Dasig X (Karl Cayme)

Merge tag 'v7.1-rc6' into next

Sync up with mainline to pull in a fix to IMS PCU driver and other
enhancements.

Merge branch 'arena_direct_access' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next into for-7.2

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required fo

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required for the next UBWC
patches.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...