Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace

Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.

Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe

Full detail summary:

New driver:
- Arm Ethos-U65/U85 accel driver

Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client

Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects

gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)

atomic:
- cleanup and improve state handling interfaces

buddy:
- optimize block management

dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation

dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput

ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling

amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support

amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch

radeon:
- refactor CIK/SI enablement

xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35

i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD

panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0

bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support

nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification

nova-drm:
- select NOVA_CORE
- 64-bit only

nouveau:
- improve reclocking on tegra 186+
- add large page and compression support

msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported

tegra:
- NVJPG driver

panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling

panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job

mediatek:
- MT8195/88 HDMIv2/DDCv2 support

rockchip:
- dsi: add support for RK3368

amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support

imx:
- add driver for HDMI TX Parallel audio interface

ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics

tidss:
- convert to drm logging
- logging cleanup

ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model

atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler

solomon:
- use drm helper for get_modes and move_valid

sitronix:
- fix output position when clearing screens

qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support

sun4i:
- layer refactors to decouple plane from output
- improve DE33 support

vc4:
- switch to generic CEC helpers

komeda:
- use drm_ logging functions

vkms:
- configfs support for display configuration

vgem:
- fix fence timer deadlock

etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"

* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...

show more ...

Merge tag 'drm-rust-next-2025-11-18' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next

Cross-subsystem Changes:

Rust
- Make slice::as_flattened usable on all supported versions of r

Merge tag 'drm-rust-next-2025-11-18' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next

Cross-subsystem Changes:

Rust
- Make slice::as_flattened usable on all supported versions of rustc.
- Add FromBytes::from_bytes_prefix() method.

Core Changes:

- Update Tyr in MAINTAINERS file.
- Remove redundant device ptr from Rust GEM object.
- Change how AlwaysRefCounted is implemented for GEM objects.
- Add deferred vm_bo cleanup to GPUVM and use it in Panthor.

Driver Changes:

Nova Core
- Introduction of bitfield! macro, with support for different storage sizes
and custom visibility.
- Introduction of safe converters between integer types for which the
conversion is lossless.
- GSP initialized up to fully booted state on Ampere.
- Use more future-proof register for GPU identification.
- Various simplifications and optimizations.

Nova
- Select NOVA_CORE.
- Depend on CONFIG_64BIT.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/aRxtJC0D1pQUepF4@google.com

show more ...

gpu: nova-core: Implement the GSP sequencer

Implement the GSP sequencer which culminates in INIT_DONE message being
received from the GSP indicating that the GSP has successfully booted.

This is ju

gpu: nova-core: Implement the GSP sequencer

Implement the GSP sequencer which culminates in INIT_DONE message being
received from the GSP indicating that the GSP has successfully booted.

This is just initial sequencer support, the actual commands will be
added in the next patches.

Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
[acourbot@nvidia.com: move GspSequencerInfo definition before its impl
blocks and rename it to GspSequence, adapt imports in sequencer.rs to
new formatting rules, remove `timeout` argument to harmonize with other
commands.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251114195552.739371-8-joelagnelf@nvidia.com>

show more ...

gpu: nova-core: gsp: Add SetRegistry command

Add support for sending the SetRegistry command, which is critical to
GSP initialization.

The RM registry is serialized into a packed format and sent vi

gpu: nova-core: gsp: Add SetRegistry command

Add support for sending the SetRegistry command, which is critical to
GSP initialization.

The RM registry is serialized into a packed format and sent via the
command queue. For now only three parameters which are required to boot
GSP are hardcoded. In the future a kernel module parameter will be added
to enable other parameters to be added.

Signed-off-by: Alistair Popple <apopple@nvidia.com>
[acourbot@nvidia.com: split into its own patch.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-12-8ae4058e3c0e@nvidia.com>

show more ...

gpu: nova-core: gsp: Add GSP command queue bindings and handling

This commit introduces core infrastructure for handling GSP command and
message queues in the nova-core driver. The command queue sys

gpu: nova-core: gsp: Add GSP command queue bindings and handling

This commit introduces core infrastructure for handling GSP command and
message queues in the nova-core driver. The command queue system enables
bidirectional communication between the host driver and GSP firmware
through a remote message passing interface.

The interface is based on passing serialised data structures over a ring
buffer with separate transmit and receive queues. Commands are sent by
writing to the CPU transmit queue and waiting for completion via the
receive queue.

To ensure safety mutable or immutable (depending on whether it is a send
or receive operation) references are taken on the command queue when
allocating the message to write/read to. This ensures message memory
remains valid and the command queue can't be mutated whilst an operation
is in progress.

Currently this is only used by the probe() routine and therefore can
only used by a single thread of execution. Locking to enable safe access
from multiple threads will be introduced in a future series when that
becomes necessary.

Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-9-8ae4058e3c0e@nvidia.com>

show more ...

gpu: nova-core: Add a slice-buffer (sbuffer) datastructure

A data structure that can be used to write across multiple slices which
may be out of order in memory. This lets SBuffer user correctly and

gpu: nova-core: Add a slice-buffer (sbuffer) datastructure

A data structure that can be used to write across multiple slices which
may be out of order in memory. This lets SBuffer user correctly and
safely write out of memory order, without error-prone tracking of
pointers/offsets.

let mut buf1 = [0u8; 3];
let mut buf2 = [0u8; 5];
let mut sbuffer = SBuffer::new([&mut buf1[..], &mut buf2[..]]);

let data = b"hello";
let result = sbuffer.write(data);

Reviewed-by: Lyude Paul <lyude@redhat.com>
Co-developed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251110-gsp_boot-v9-6-8ae4058e3c0e@nvidia.com>

show more ...