drm/xlnx/zynqmp-dpsub: Fix dependencies for COMPILE_TEST

The zynqmp-dpsub driver does not have build time dependencies on the PHY
or DMA drivers. These are runtime hardware restrictions.

Make the t

drm/xlnx/zynqmp-dpsub: Fix dependencies for COMPILE_TEST

The zynqmp-dpsub driver does not have build time dependencies on the PHY
or DMA drivers. These are runtime hardware restrictions.

Make the two dependencies optional if COMPILE_TEST.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260505094716.1784225-1-wenst@chromium.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

show more ...

drm: xlnx: zynqmp_dpsub: fix Kconfig dependencies for ASoC

The new audio code fails to build when sounds support is in a loadable
module but the GPU driver is built-in:

x86_64-linux-ld: zynqmp_dp_a

drm: xlnx: zynqmp_dpsub: fix Kconfig dependencies for ASoC

The new audio code fails to build when sounds support is in a loadable
module but the GPU driver is built-in:

x86_64-linux-ld: zynqmp_dp_audio.c:(.text+0x6a8): undefined reference to `devm_snd_soc_register_card'
x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1bc): undefined reference to `snd_soc_info_volsw'
x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1f0): undefined reference to `snd_soc_get_volsw'
x86_64-linux-ld: drivers/gpu/drm/xlnx/zynqmp_dp_audio.o:(.rodata+0x1f4): undefined reference to `snd_soc_put_volsw'

Change the Kconfig dependency to disallow the sound support in this
configuration.

Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227132036.1136600-1-arnd@kernel.org

show more ...

drm: xlnx: zynqmp_dpsub: Add DP audio support

Add basic DisplayPort audio support.

Support non-live audio playback from two PCMs (DMA channels), and the
volume control in the audio mixer.

As older

drm: xlnx: zynqmp_dpsub: Add DP audio support

Add basic DisplayPort audio support.

Support non-live audio playback from two PCMs (DMA channels), and the
volume control in the audio mixer.

As older dtb files may not have the audio DMA channels defined, the
driver will just mark the audio support as disabled if the audio DMA is
missing, and will continue with only display support.

Note: Reset doesn't seem to work (ZYNQMP_DISP_AUD_SOFT_RESET). If we do
a reset, audio playback won't start again even if, afaics, we do set up
all the necessary registers. So, at the moment, resetting the audio
block in dp_dai_hw_free() is commented out.

Tested-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023-xilinx-dp-audio-v4-3-5128881457be@ideasonboard.com

show more ...

drm/xlnx: Run DRM default client setup

Call drm_client_setup_with_fourcc() to run the kernel's default client
setup for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start

drm/xlnx: Run DRM default client setup

Call drm_client_setup_with_fourcc() to run the kernel's default client
setup for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.

v5:
- select DRM_CLIENT_SELECTION
v2:
- use drm_client_setup_with_fourcc()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Michal Simek <michal.simek@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-48-tzimmermann@suse.de

show more ...

drm/bridge-connector: move to DRM_DISPLAY_HELPER module

drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the

drm/bridge-connector: move to DRM_DISPLAY_HELPER module

drm_bridge_connector is a "leaf" driver, belonging to the display
helper, rather than the "CRTC" drm_kms_helper module. Move the driver
to the drm/display and add necessary Kconfig selection clauses.

Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

show more ...

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be mor

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done

# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

show more ...

drm/display: Introduce a DRM display-helper module

Replace the DP-helper module with a display-helper module. The
support for DisplayPort becomes an internal option that drivers
have to select. Upda

drm/display: Introduce a DRM display-helper module

Replace the DP-helper module with a display-helper module. The
support for DisplayPort becomes an internal option that drivers
have to select. Update all related Kconfig and Makefile rules.

Besides the existing code for DisplayPort, the new module will
contain helpers for other video-output standards, such as HDMI.
Drivers will have to select their required video-output helpers.

Linking all display-related code into a single module avoids the
proliferation of small kernel modules.

The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz,
and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace
to drm_display_helper.

v2:
* mention module parameters in commit message (Javier)
* distiguish between display module and DP support in Kconfig
* update Makefile rules for DP helpers
* move Kconfig rules into separate file under display/

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-4-tzimmermann@suse.de

show more ...

drm/dp: Move DisplayPort helpers into separate helper module

Move DisplayPort functions into a separate module to reduce the size
of the KMS helpers. Select DRM_DP_HELPER for all users of the code.

drm/dp: Move DisplayPort helpers into separate helper module

Move DisplayPort functions into a separate module to reduce the size
of the KMS helpers. Select DRM_DP_HELPER for all users of the code. To
avoid naming conflicts, rename drm_dp_helper.c to drm_dp.c

This change can help to reduce the size of the kernel binary. Some
numbers from a x86-64 test build:

Before:
drm_kms_helper.ko: 447480 bytes

After:
drm_dp_helper.ko: 216632 bytes
drm_kms_helper.ko: 239424 bytes

For early-boot graphics, generic DRM drivers, such as simpledrm,
require DRM KMS helpers to be built into the kernel. Generic helper
functions for DisplayPort take up a significant portion of DRM KMS
helper library. These functions are not used by generic drivers and
can be loaded as a module.

v3:
* fix include statement in DRM selftests
v2:
* move DP helper code into dp/ (Jani)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-4-tzimmermann@suse.de

show more ...

drm: Remove CONFIG_DRM_KMS_CMA_HELPER option

Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER
has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting
KMS help

drm: Remove CONFIG_DRM_KMS_CMA_HELPER option

Link drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPER
has been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. Selecting
KMS helpers and CMA will now automatically enable CMA KMS helpers.

Some drivers' Kconfig files did not correctly select KMS or CMA helpers.
Fix this as part of the change.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de

show more ...

drm: xlnx: zynqmp_dpsub: Update dependencies for ZynqMP DP

ZynqMP DP requires the ZynqMP PHY and DPDMA to operate properly. So
depend on both the PHY and DPDMA.

Signed-off-by: Dylan Yip <dylan.yip@

drm: xlnx: zynqmp_dpsub: Update dependencies for ZynqMP DP

ZynqMP DP requires the ZynqMP PHY and DPDMA to operate properly. So
depend on both the PHY and DPDMA.

Signed-off-by: Dylan Yip <dylan.yip@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

show more ...

drm: xlnx: dpsub: Fix DMADEVICES Kconfig dependency

The dpsub driver uses the DMA engine API, and thus selects DMA_ENGINE to
provide that API. DMA_ENGINE depends on DMADEVICES, which can be
deselect

drm: xlnx: dpsub: Fix DMADEVICES Kconfig dependency

The dpsub driver uses the DMA engine API, and thus selects DMA_ENGINE to
provide that API. DMA_ENGINE depends on DMADEVICES, which can be
deselected by the user, creating a possibly unmet indirect dependency:

WARNING: unmet direct dependencies detected for DMA_ENGINE
Depends on [n]: DMADEVICES [=n]
Selected by [m]:
- DRM_ZYNQMP_DPSUB [=m] && HAS_IOMEM [=y] && (ARCH_ZYNQMP || COMPILE_TEST [=y]) && COMMON_CLK [=y] && DRM [=m] && OF [=y]

Add a dependency on DMADEVICES to fix this.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>

show more ...

drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem

The Xilinx ZynqMP SoC has a hardened display pipeline named DisplayPort
Subsystem. It includes a buffer manager, a video pipeline re

drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem

The Xilinx ZynqMP SoC has a hardened display pipeline named DisplayPort
Subsystem. It includes a buffer manager, a video pipeline renderer
(blender), an audio mixer and a DisplayPort source controller
(transmitter). The DMA engine the provide data to the buffer manager, as
well as the DisplayPort PHYs that drive the lanes, are external to the
subsystem and interfaced using the DMA engine and PHY APIs respectively.

This driver supports the DisplayPort Subsystem and implements

- Two planes, for graphics and video
- One CRTC that supports alpha blending
- One encoder for the DisplayPort transmitter
- One connector for an external monitor

It currently doesn't support

- Color keying
- Test pattern generation
- Audio
- Live input from the Programmable Logic (FPGA)
- Output to the Programmable Logic (FPGA)

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

show more ...