#
58809f61 |
| 02-Oct-2025 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie: "cross-subsystem: - i2c-hid: Make elan touch controllers power on after panel is
Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie: "cross-subsystem: - i2c-hid: Make elan touch controllers power on after panel is enabled - dt bindings for STM32MP25 SoC - pci vgaarb: use screen_info helpers - rust pin-init updates - add MEI driver for late binding firmware update/load
uapi: - add ioctl for reassigning GEM handles - provide boot_display attribute on boot-up devices
core: - document DRM_MODE_PAGE_FLIP_EVENT - add vendor specific recovery method to drm device wedged uevent
gem: - Simplify gpuvm locking
ttm: - add interface to populate buffers
sched: - Fix race condition in trace code
atomic: - Reallow no-op async page flips
display: - dp: Fix command length
video: - Improve pixel-format handling for struct screen_info
rust: - drop Opaque<> from ioctl args - Alloc: - BorrowedPage type and AsPageIter traits - Implement Vmalloc::to_page() and VmallocPageIter - DMA/Scatterlist: - Add dma::DataDirection and type alias for dma_addr_t - Abstraction for struct scatterlist and sg_table - DRM: - simplify use of generics - add DriverFile type alias - drop Object::SIZE - Rust: - pin-init tree merge - Various methods for AsBytes and FromBytes traits
gpuvm: - Support madvice in Xe driver
gpusvm: - fix hmm_pfn_to_map_order usage in gpusvm
bridge: - Improve and fix ref counting on bridge management - cdns-dsi: Various improvements to mode setting - Support Solomon SSD2825 plus DT bindings - Support Waveshare DSI2DPI plus DT bindings - Support Content Protection property - display-connector: Improve DP display detection - Add support for Radxa Ra620 plus DT bindings - adv7511: Provide SPD and HDMI infoframes - it6505: Replace crypto_shash with sha() - synopsys: Add support for DW DPTX Controller plus DT bindings - adv7511: Write full Audio infoframe - ite6263: Support vendor-specific infoframes - simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel: - panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64; Support SHP LQ134Z1; Fixes - panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings - Support Samsung AMS561RA01 - Support Hydis HV101HD1 plus DT bindings - ilitek-ili9881c: Refactor mode setting; Add support for Bestar BSD1218-A101KL68 LCD plus DT bindings - lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings - edp: Add support for additonal mt8189 Chromebook panels - lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu: - add CRIU support for gem objects - RAS updates - VCN SRAM load fixes - EDID read fixes - eDP ALPM support - Documentation updates - Rework PTE flag generation - DCE6 fixes - VCN devcoredump cleanup - MMHUB client id fixes - VCN 5.0.1 RAS support - SMU 13.0.x updates - Expanded PCIe DPC support - Expanded VCN reset support - VPE per queue reset support - give kernel jobs unique id for tracing - pre-populate exported buffers - cyan skillfish updates - make vbios build number available in sysfs - userq updates - HDCP updates - support MMIO remap page as ttm pool - JPEG parser updates - DCE6 DC updates - use devm for i2c buses - GPUVM locking updates - Drop non-DC DCE11 code - improve fallback handling for pixel encoding
amdkfd: - SVM/page migration fixes - debugfs fixes - add CRIO support for gem objects - SVM updates
radeon: - use dev_warn_once in CS parsers
xe: - add madvise interface - add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count and memory attributes - drop L# bank mask reporting from media GT3 on Xe3+. - add SLPC power_profile sysfs interface - add configs attribs to add post/mid context-switch commands - handle firmware reported hardware errors notifying userspace with device wedged uevent - use same dir structure across sysfs/debugfs - cleanup and future proof vram region init - add G-states and PCI link states to debugfs - Add SRIOV support for CCS surfaces on Xe2+ - Enable SRIOV PF mode by default on supported platforms - move flush to common code - extended core workarounds for Xe2/3 - use DRM scheduler for delayed GT TLB invalidations - configs improvements and allow VF device enablement - prep work to expose mmio regions to userspace - VF migration support added - prepare GPU SVM for THP migration - start fixing XE_PAGE_SIZE vs PAGE_SIZE - add PSMI support for hw validation - resize VF bars to max possible size according to number of VFs - Ensure GT is in C0 during resume - pre-populate exported buffers - replace xe_hmm with gpusvm - add more SVM GT stats to debugfs - improve fake pci and WA kunnit handle for new platform testing - Test GuC to GuC comms to add debugging - use attribute groups to simplify sysfs registration - add Late Binding firmware code to interact with MEI
i915: - apply multiple JSL/EHL/Gen7/Gen6 workarounds properly - protect against overflow in active_engine() - Use try_cmpxchg64() in __active_lookup() - include GuC registers in error state - get rid of dev->struct_mutex - iopoll: generalize read_poll_timout - lots more display refactoring - Reject HBR3 in any eDP Panel - Prune modes for YUV420 - Display Wa fix, additions, and updates - DP: Fix 2.7 Gbps link training on g4x - DP: Adjust the idle pattern handling - DP: Shuffle the link training code a bit - Don't set/read the DSI C clock divider on GLK - Enable_psr kernel parameter changes - Type-C enabled/disconnected dp-alt sink - Wildcat Lake enabling - DP HDR updates - DRAM detection - wait PSR idle on dsb commit - Remove FBC modulo 4 restriction for ADL-P+ - panic: refactor framebuffer allocation
habanalabs: - debug/visibility improvements - vmalloc-backed coherent mmap support - HLDIO infrastructure
nova-core: - various register!() macro improvements - minor vbios/firmware fixes/refactoring - advance firmware boot stages; process Booter and patch signatures - process GSP and GSP bootloader - Add r570.144 firmware bindings and update to it - Move GSP boot code to own module - Use new pin-init features to store driver's private data in a single allocation - Update ARef import from sync::aref
nova-drm: - Update ARef import from sync::aref
tyr: - initial driver skeleton for a rust driver for ARM Mali GPUs - capable of powering up, query metadata and provide it to userspace.
msm: - GPU and Core: - in DT bindings describe clocks per GPU type - GMU bandwidth voting for x1-85 - a623/a663 speedbins - cleanup some remaining no-iommu leftovers after VM_BIND conversion - fix GEM obj 32b size truncation - add missing VM_BIND param validation - IFPC for x1-85 and a750 - register xml and gen_header.py sync from mesa - Display: - add missing bindings for display on SC8180X - added DisplayPort MST bindings - conversion from round_rate() to determine_rate()
amdxdna: - add IOCTL_AMDXDNA_GET_ARRAY - support user space allocated buffers - streamline PM interfaces - Refactoring wrt. hardware contexts - improve error reporting
nouveau: - use GSP firmware by default - improve error reporting - Pre-populate exported buffers
ast: - Clean up detection of DRAM config
exynos: - add DSIM bridge driver support for Exynos7870 - Document Exynos7870 DSIM compatible in dt-binding
panthor: - Print task/pid on errors - Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25 - Improve cache flushing - Fail VM bind if BO has offset
renesas: - convert to RUNTIME_PM_OPS
rcar-du: - Make number of lanes configurable - Use RUNTIME_PM_OPS - Add support for DSI commands
rocket: - Add driver for Rockchip NPU plus DT bindings - Use kfree() and sizeof() correctly - Test DMA status
rockchip: - dsi2: Add support for RK3576 plus DT bindings - Add support for RK3588 DPTX output
tidss: - Use crtc_ fields for programming display mode - Remove other drivers from aperture
pixpaper: - Add support for Mayqueen Pixpaper plus DT bindings
v3d: - Support querying nubmer of GPU resets for KHR_robustness
stm: - Clean up logging - ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix: - st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss: - Convert to kernel's FIELD_ macros
vesadrm: - Support 8-bit palette mode
imagination: - Improve power management - Add support for TH1520 GPU - Support Risc-V architectures
v3d: - Improve job management and locking
vkms: - Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x - Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits) drm/amd: Add name to modes from amdgpu_connector_add_common_modes() drm/amd: Drop some common modes from amdgpu_connector_add_common_modes() drm/amdgpu: update MODULE_PARM_DESC for freesync_video drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes() drm/amd/display: Share dce100_validate_global with DCE6-8 drm/amd/display: Share dce100_validate_bandwidth with DCE6-8 drm/amdgpu: Fix fence signaling race condition in userqueue amd/amdkfd: enhance kfd process check in switch partition amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw drm/amd/display: Reject modes with too high pixel clock on DCE6-10 drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes() drm/amd/display: Only enable common modes for eDP and LVDS drm/amdgpu: remove the redeclaration of variable i drm/amdgpu/userq: assign an error code for invalid userq va drm/amdgpu: revert "rework reserved VMID handling" v2 drm/amdgpu: remove leftover from enforcing isolation by VMID drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails accel/habanalabs: add Infineon version check accel/habanalabs/gaudi2: read preboot status after recovering from dirty state accel/habanalabs: add HL_GET_P_STATE passthrough type ...
show more ...
|
Revision tags: v6.17, v6.17-rc7 |
|
#
0faeb8cf |
| 21-Sep-2025 |
Dave Airlie <airlied@redhat.com> |
Merge tag 'drm-xe-next-2025-09-19' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes: - Drop L3 bank mask reporting from the media GT on Xe3 and later. Only do that for
Merge tag 'drm-xe-next-2025-09-19' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes: - Drop L3 bank mask reporting from the media GT on Xe3 and later. Only do that for the primary GT. No userspace needs or uses it for media and some platforms may report bogus values. - Add SLPC power_profile sysfs interface with support for base and power_saving modes (Vinay Belgaumkar, Rodrigo Vivi) - Add configfs attributes to add post/mid context-switch commands (Lucas De Marchi)
Cross-subsystem Changes: - Fix hmm_pfn_to_map_order() usage in gpusvm and refactor APIs to align with pieces previous handled by xe_hmm (Matthew Auld)
Core Changes: - Add MEI driver for Late Binding Firmware Update/Upload (Alexander Usyskin)
Driver Changes: - Fix GuC CT teardown wrt TLB invalidation (Satyanarayana) - Fix CCS save/restore on VF (Satyanarayana) - Increase default GuC crash buffer size (Zhanjun) - Allow to clear GT stats in debugfs to aid debugging (Matthew Brost) - Add more SVM GT stats to debugfs (Matthew Brost) - Fix error handling in VMA attr query (Himal) - Move sa_info in debugfs to be per tile (Michal Wajdeczko) - Limit number of retries upon receiving NO_RESPONSE_RETRY from GuC to avoid endless loop (Michal Wajdeczko) - Fix configfs handling for survivability_mode undoing user choice when unbinding the module (Michal Wajdeczko) - Refactor configfs attribute visibility to future-proof it and stop exposing survivability_mode if not applicable (Michal Wajdeczko) - Constify some functions (Harish Chegondi, Michal Wajdeczko) - Add/extend more HW workarounds for Xe2 and Xe3 (Harish Chegondi, Tangudu Tilak Tirumalesh) - Replace xe_hmm with gpusvm (Matthew Auld) - Improve fake pci and WA kunit handling for testing new platforms (Michal Wajdeczko) - Reduce unnecessary PTE writes when migrating (Sanjay Yadav) - Cleanup GuC interface definitions and log message (John Harrison) - Small improvements around VF CCS (Michal Wajdeczko) - Enable bus mastering for the I2C controller (Raag Jadav) - Prefer devm_mutex of hand rolling it (Christophe JAILLET) - Drop sysfs and debugfs attributes not available for VF (Michal Wajdeczko) - GuC CT devm actions improvements (Michal Wajdeczko) - Recommend new GuC versions for PTL and BMG (Julia Filipchuk) - Improveme driver handling for exhaustive eviction using new xe_validation wrapper around drm_exec (Thomas Hellström) - Add and use printk wrappers for tile and device (Michal Wajdeczko) - Better document workaround handling in Xe (Lucas De Marchi) - Improvements on ARRAY_SIZE and ERR_CAST usage (Lucas De Marchi, Fushuai Wang) - Align CSS firmware headers with the GuC APIs (John Harrison) - Test GuC to GuC (G2G) communication to aid debug in pre-production firmware (John Harrison) - Bail out driver probing if GuC fails to load (John Harrison) - Allow error injection in xe_pxp_exec_queue_add() (Daniele Ceraolo Spurio) - Minor refactors in xe_svm (Shuicheng Lin) - Fix madvise ioctl error handling (Shuicheng Lin) - Use attribute groups to simplify sysfs registration (Michal Wajdeczko) - Add Late Binding Firmware implementation in Xe to work together with the MEI component (Badal Nilawar, Daniele Ceraolo Spurio, Rodrigo Vivi) - Fix build with CONFIG_MODULES=n (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/c2et6dnkst2apsgt46dklej4nprqdukjosb55grpaknf3pvcxy@t7gtn3hqtp6n
show more ...
|
Revision tags: v6.17-rc6 |
|
#
c2ae94cf |
| 08-Sep-2025 |
Thomas Hellström <thomas.hellstrom@linux.intel.com> |
drm/xe: Convert the CPU fault handler for exhaustive eviction
The CPU fault handler may populate bos and migrate, and in doing so might interfere with other tasks validating.
Rework the CPU fault h
drm/xe: Convert the CPU fault handler for exhaustive eviction
The CPU fault handler may populate bos and migrate, and in doing so might interfere with other tasks validating.
Rework the CPU fault handler completely into a fastpath and a slowpath. The fastpath trylocks only the validation lock in read-mode. If that fails, there's a fallback to the slowpath, where we do a full validation transaction.
This mandates open-coding of bo locking, bo idling and bo populating, but we still call into TTM for fault finalizing.
v2: - Rework the CPU fault handler to actually take part in the exhaustive eviction scheme (Matthew Brost). v3: - Don't return anything but VM_FAULT_RETRY if we've dropped the mmap_lock. Not even if a signal is pending. - Rebase on gpu_madvise() and split out fault migration. - Wait for idle after migration. - Check whether the resource manager uses tts to determine whether to map the tt or iomem. - Add a number of asserts. - Allow passing a ttm_operation_ctx to xe_bo_migrate() so that it's possible to try non-blocking migration. - Don't fall through to TTM on migration / population error Instead remove the gfp_retry_mayfail in mode 2 where we must succeed. (Matthew Brost) v5: - Don't allow faulting in the imported bo case (Matthew Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthews Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250908101246.65025-7-thomas.hellstrom@linux.intel.com
show more ...
|
#
c460bc23 |
| 08-Sep-2025 |
Thomas Hellström <thomas.hellstrom@linux.intel.com> |
drm/xe: Introduce an xe_validation wrapper around drm_exec
Introduce a validation wrapper xe_validation_guard() as a helper intended to be used around drm_exec transactions what perform validations.
drm/xe: Introduce an xe_validation wrapper around drm_exec
Introduce a validation wrapper xe_validation_guard() as a helper intended to be used around drm_exec transactions what perform validations. Once TTM can handle exhaustive eviction we could remove this wrapper or make it mostly a NO-OP unless other functionality is added to it.
Currently the wrapper takes a read lock upon entry and if the transaction hits an OOM, all locks are released and the transaction is retried with a write-lock. If all other validations participate in this scheme, the transaction with the write lock will be the only transaction validating and should have access to all available non-pinned memory.
There is currently a problem in that TTM converts -EDEADLOCKS to -ENOMEM, and with ww_mutex slowpath error injections, we can hit -ENOMEMs without having actually ran out of memory. We abuse ww_mutex internals to detect such situations until TTM is fixes to not convert the error code. In the meantime, injecting ww_mutex slowpath -EDEADLOCKs is a good way to test the implementation in the absence of real OOMs.
Just introduce the wrapper in this commit. It will be hooked up to the driver in following commits.
v2: - Mark class_xe_validation conditional so that the loop is skipped on initialization error. - Argument sanitation (Matt Brost) - Fix conditional execution of xe_validation_ctx_fini() (Matt Brost) - Add a no_block mode for upcoming use in the CPU fault handler. v4: - Update kerneldoc. (Xe CI).
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250908101246.65025-3-thomas.hellstrom@linux.intel.com
show more ...
|
#
0131514f |
| 08-Sep-2025 |
Thomas Hellström <thomas.hellstrom@linux.intel.com> |
drm/xe: Pass down drm_exec context to validation
We want all validation (potential backing store allocation) to be part of a drm_exec transaction. Therefore add a drm_exec pointer argument to xe_bo_
drm/xe: Pass down drm_exec context to validation
We want all validation (potential backing store allocation) to be part of a drm_exec transaction. Therefore add a drm_exec pointer argument to xe_bo_validate() and ___xe_bo_create_locked(). Upcoming patches will deal with making all (or nearly all) calls to these functions part of a drm_exec transaction. In the meantime, define special values of the drm_exec pointer:
XE_VALIDATION_UNIMPLEMENTED: Implementation of the drm_exec transaction has not been done yet. XE_VALIDATION_UNSUPPORTED: Some Middle-layers (dma-buf) doesn't allow the drm_exec context to be passed down to map_attachment where validation takes place. XE_VALIDATION_OPT_OUT: May be used only for kunit tests where exhaustive eviction isn't crucial and the ROI of converting those is very small.
For XE_VALIDATION_UNIMPLEMENTED and XE_VALIDATION_OPT_OUT there is also a lockdep check that a drm_exec transaction can indeed start at the location where the macro is expanded. This is to encourage developers to take this into consideration early in the code development process.
v2: - Fix xe_vm_set_validation_exec() imbalance. Add an assert that hopefully catches future instances of this (Matt Brost) v3: - Extend to psmi_alloc_object
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v3 Link: https://lore.kernel.org/r/20250908101246.65025-2-thomas.hellstrom@linux.intel.com
show more ...
|