Merge tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
"Weekly fixes, msm and xe are the two main ones, with a bunch of
scattered fixes inc

Merge tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
"Weekly fixes, msm and xe are the two main ones, with a bunch of
scattered fixes including a largish revert in mgag200, then amdgpu,
vmwgfx and scattering of other minor ones.

All seems pretty regular.

msm:
- Display:
- move CRTC resource assignment to atomic_check otherwise to make
consecutive calls to atomic_check() consistent
- fix rounding / sign-extension issues with pclk calculation in
case of DSC
- cleanups to drop incorrect null checks in dpu snapshots
- fix to use kvzalloc in dpu snapshot to avoid allocation issues
in heavily loaded system cases
- Fix to not program merge_3d block if dual LM is not being used
- Fix to not flush merge_3d block if its not enabled otherwise
this leads to false timeouts
- GPU:
- a7xx: add a fence wait before SMMU table update

xe:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew
Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)

amdgpu:
- SR-IOV fix
- CS chunk handling fix
- MES fixes
- SMU13 fixes

amdkfd:
- VRAM usage reporting fix

radeon:
- Fix possible_clones handling

i915:
- Two DP bandwidth related MST fixes

ast:
- Clear EDID on unplugged connectors

host1x:
- Fix boot on Tegra186
- Set DMA parameters

mgag200:
- Revert VBLANK support

panel:
- himax-hx83192: Adjust power and gamma

qaic:
- Sgtable loop fixes

vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()"

* tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel: (45 commits)
drm/ast: vga: Clear EDID if no display is connected
drm/ast: sil164: Clear EDID if no display is connected
Revert "drm/mgag200: Add vblank support"
drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs
drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
drm/xe/bmg: improve cache flushing behaviour
drm/xe/xe_sync: initialise ufence.signalled
drm/xe/ufence: ufence can be signaled right after wait_woken
drm/xe: Use bookkeep slots for external BO's in exec IOCTL
drm/xe/query: Increase timestamp width
drm/xe: Don't free job in TDR
drm/xe: Take job list lock in xe_sched_add_pending_job
drm/xe: fix unbalanced rpm put() with declare_wedged()
drm/xe: fix unbalanced rpm put() with fence_fini()
drm/xe/xe2lpg: Extend Wa_15016589081 for xe2lpg
drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode
drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
drm/msm/a6xx+: Insert a fence wait before SMMU table update
drm/msm/dpu: don't always program merge_3d block
drm/msm/dpu: Don't always set merge_3d pending flush
...

show more ...

Merge tag 'drm-misc-fixes-2024-10-17' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

ast:
- Clear EDID on unplugged connectors

host1x:
- Fix boot on

Merge tag 'drm-misc-fixes-2024-10-17' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

ast:
- Clear EDID on unplugged connectors

host1x:
- Fix boot on Tegra186
- Set DMA parameters

mgag200:
- Revert VBLANK support

panel:
- himax-hx83192: Adjust power and gamma

qaic:
- Sgtable loop fixes

vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017115516.GA196624@linux.fritz.box

show more ...

drm/vmwgfx: Cleanup kms setup without 3d

Do not validate format equality for the non 3d cases to allow xrgb to
argb copies and make sure the dx binding flags are only used
on dx compatible surfaces.

drm/vmwgfx: Cleanup kms setup without 3d

Do not validate format equality for the non 3d cases to allow xrgb to
argb copies and make sure the dx binding flags are only used
on dx compatible surfaces.

Fixes basic 2d kms setup on configurations without 3d. There's little
practical benefit to it because kms framebuffer coherence is disabled
on configurations without 3d but with those changes the code actually
makes sense.

v2: Remove the now unused format variable

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: d6667f0ddf46 ("drm/vmwgfx: Fix handling of dumb buffers")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.9+
Cc: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Cc: Martin Krastev <martin.krastev@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827043905.472825-1-zack.rusin@broadcom.com

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge 6.11-rc3 into driver-core-next

We need the driver core fixes in here as well to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc7 into char-misc-next

We need the char-misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc6 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into usb-next

We need the usb fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into tty-next

We need the tty/serial fixes in here to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into char-misc-next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.1

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge patch series "remove size limit on XIP kernel"

Nam Cao <namcao@linutronix.de> says:

Hi,

For XIP kernel, the writable data section is always at offset specified in
XIP_OFFSET, which is hard-c

Merge patch series "remove size limit on XIP kernel"

Nam Cao <namcao@linutronix.de> says:

Hi,

For XIP kernel, the writable data section is always at offset specified in
XIP_OFFSET, which is hard-coded to 32MB.

Unfortunately, this means the read-only section (placed before the
writable section) is restricted in size. This causes build failure if the
kernel gets too large.

This series remove the use of XIP_OFFSET one by one, then remove this
macro entirely at the end, with the goal of lifting this size restriction.

Also some cleanup and documentation along the way.

* b4-shazam-merge
riscv: remove limit on the size of read-only section for XIP kernel
riscv: drop the use of XIP_OFFSET in create_kernel_page_table()
riscv: drop the use of XIP_OFFSET in kernel_mapping_va_to_pa()
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_OFFSET
riscv: replace misleading va_kernel_pa_offset on XIP kernel
riscv: don't export va_kernel_pa_offset in vmcoreinfo for XIP kernel
riscv: cleanup XIP_FIXUP macro
riscv: change XIP's kernel_map.size to be size of the entire kernel
...

Link: https://lore.kernel.org/r/cover.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Introducing Multi-Path DMA Support for mlx5 RDMA Driver

From Yishai,

Overview
--------
This patch series aims to enable multi-path DMA support, allowing an
mlx5 RDMA device to issue DMA commands th

Introducing Multi-Path DMA Support for mlx5 RDMA Driver

From Yishai,

Overview
--------
This patch series aims to enable multi-path DMA support, allowing an
mlx5 RDMA device to issue DMA commands through multiple paths. This
feature is critical for improving performance and reaching line rate
in certain environments where issuing PCI transactions over one path
may be significantly faster than over another. These differences can
arise from various PCI generations in the system or the specific system
topology.

To achieve this functionality, we introduced a data direct DMA device
that can serve the RDMA device by issuing DMA transactions on its
behalf.

The main key features and changes are described below.

Multi-Path Discovery
--------------------
API Implementation:
* Introduced an API to discover multiple paths for a given mlx5 RDMA
device.
IOCTL Command:
* Added a new IOCTL command, MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH, to
the DEVICE object. When an affiliated Data-Direct/DMA device is present,
its sysfs path is returned.

Feature Activation by mlx5 RDMA Application
-------------------------------------------
UVERBS Extension:
* Extended UVERBS_METHOD_REG_DMABUF_MR over UVERBS_OBJECT_MR to include
mlx5 extended flags.
Access Flag:
* Introduced the MLX5_IB_UAPI_REG_DMABUF_ACCESS_DATA_DIRECT flag, allowing
applications to request the use of the affiliated DMA device for DMABUF
registration.

Data-Direct/DMA Device
----------------------
New Driver:
* Introduced a new driver to manage the new DMA PF device ID (0x2100).
Its registration/un-registration is handled as part of the mlx5_ib init/exit
flows, with mlx5 IB devices as its clients.
Functionality:
* The driver does not interface directly with the firmware (no command interface,
no caps, etc.) but works over PCI to activate its DMA functionality. It serves
as the DMA device for efficiently accessing other PCI devices (e.g., GPU PF) and
reads its VUID over PCI to handle NICs registrations with the same VUID.

mlx5 IB RDMA Device
---------------------------
VUID Query:
* Reads its affiliated DMA PF VUID via the QUERY_VUID command with the data_direct
bit set.
Driver Registration:
* Registers with the DMA PF driver to be notified upon bind/unbind.
Application Request Handling:
* Uses the DMA PF device upon application request as described above.

DMABUF over Umem
----------------
Introduced an option to obtain a DMABUF UMEM using a different DMA
device instead of the IB device, allowing the device to register over
IOMMU with the expected DMA device for a given buffer registration.

Further details are provided in the commit logs of the patches in this series.

Thanks

Link: https://lore.kernel.org/all/cover.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in t

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.

The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.

Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.

Follows the list of the rest of the changes grouped by type of
change.

Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.

The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.

The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.

Constified a few global data structures in the virtio driver.

The Renesas driver simplifies the bus speed handling in the init
function making it more readable.

Improved an if/else statement in probe function of the Renesas
R-Car driver.

The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().

Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.

Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.

Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.

Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.

The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.

In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.

New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.

New support
-----------
Added support for:

- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.

The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.

Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.

Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.

The i2c-sprd binding has been converted to YAML.

show more ...

Merge tag 'v6.11-rc2' into media_stage

Linux 6.11-rc2

* tag 'v6.11-rc2': (283 commits)
Linux 6.11-rc2
profiling: remove profile=sleep support
arm: dts: arm: versatile-ab: Fix duplicate clock

Merge tag 'v6.11-rc2' into media_stage

Linux 6.11-rc2

* tag 'v6.11-rc2': (283 commits)
Linux 6.11-rc2
profiling: remove profile=sleep support
arm: dts: arm: versatile-ab: Fix duplicate clock node name
runtime constants: deal with old decrepit linkers
clocksource: Fix brown-bag boolean thinko in cs_watchdog_read()
cifs: update internal version number
smb: client: fix FSCTL_GET_REPARSE_POINT against NetApp
smb3: add dynamic tracepoints for shutdown ioctl
cifs: Remove cifs_aio_ctx
smb: client: handle lack of FSCTL_GET_REPARSE_POINT support
arm64: jump_label: Ensure patched jump_labels are visible to all CPUs
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
thermal: core: Update thermal zone registration documentation
Revert "nouveau: rip out busy fence waits"
protect the fetch of ->fd[fd] in do_dup2() from mispredictions
x86/uaccess: Zero the 8-byte get_range case on failure on 32-bit
riscv: Fix linear mapping checks for non-contiguous memory regions
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
PCI: pciehp: Retain Power Indicator bits for userspace indicators
...

show more ...

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes from perf-tools/perf-tools, some of which were also in
perf-tools-next but were then indentified as being more ap

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes from perf-tools/perf-tools, some of which were also in
perf-tools-next but were then indentified as being more appropriate to
go sooner, to fix regressions in v6.11.

Resolve a simple merge conflict in tools/perf/tests/pmu.c where a more
future proof approach to initialize all fields of a struct was used in
perf-tools-next, the one that is going into v6.11 is enough for the
segfault it addressed (using an uninitialized test_pmu.alias field).

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick a patch that albeit being for tools/perf/ directory went thru a
different tree and ended up breaking some recent tests int

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick a patch that albeit being for tools/perf/ directory went thru a
different tree and ended up breaking some recent tests introduced in the
perf-tools-next tree to validate duplicate events in the JSON
performance event files.

Link: https://lore.kernel.org/lkml/ZrIqDMg7cBVhstYU@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge branch 'bpf/master' into for-6.12

Pull bpf/master to receive baebe9aaba1e ("bpf: allow passing struct
bpf_iter_<type> as kfunc arguments") and related changes in preparation for
the DSQ iterat

Merge branch 'bpf/master' into for-6.12

Pull bpf/master to receive baebe9aaba1e ("bpf: allow passing struct
bpf_iter_<type> as kfunc arguments") and related changes in preparation for
the DSQ iterator patchset.

Signed-off-by: Tejun Heo <tj@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Cross-merge bpf fixes after downstream PR including
important fixes (from bpf-next point of view):
commit 41c24102af7b ("selftests/bpf: Fi

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Cross-merge bpf fixes after downstream PR including
important fixes (from bpf-next point of view):
commit 41c24102af7b ("selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp")
commit fdad456cbcca ("bpf: Fix updating attached freplace prog in prog_array map")

No conflicts.

Adjacent changes in:
include/linux/bpf_verifier.h
kernel/bpf/verifier.c
tools/testing/selftests/bpf/Makefile

Link: https://lore.kernel.org/bpf/20240813234307.82773-1-alexei.starovoitov@gmail.com/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

The Aspeed driver tracks the controller's state (stop, pending,
start, etc.

Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

The Aspeed driver tracks the controller's state (stop, pending,
start, etc.). Previously, when the stop command was sent, the
state was not updated. The fix in this pull request ensures the
driver's state is aligned with the device status.

The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement
was missing the else, causing it to move forward instead of
exiting the function in case of an error.

The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the
IRQ setup to prevent unwanted interrupts during probe.

The Xilinx XPS controller fixes TX FIFO handling to avoid missed
NAKs. Another fix ensures the controller is reinitialized when
the bus appears busy.

show more ...

Merge v6.11-rc7 into drm-next

Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.

Signed-off-by: Simona Vetter <simona.v

Merge v6.11-rc7 into drm-next

Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.

Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>

show more ...

Merge tag 'hwmon-for-v6.11-rc7' into review-hans

Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").

This

Merge tag 'hwmon-for-v6.11-rc7' into review-hans

Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").

This is a dependency for a set of WMI event data refactoring changes.

show more ...