Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriat

Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriately, the string and pstore ones are the main ones that
come to mind.

Otherwise it's the usual drivers, xe is getting enabled by default on
some new hardware, we've changed the device number handling to allow
more devices, and we added some optional rust code to create QR codes
in the panic handler, an idea first suggested I think 10 years ago :-)

string:
- add mem_is_zero()

core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm

fbdev:
- remove usage of old fbdev hooks

kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support

dma-buf:
- docs cleanup

buddy:
- Add start address support for trim function

printk:
- pass description to kmsg_dump

scheduler:
- Remove full_recover from drm_sched_start

ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory

panic:
- add display QR code (in rust)

displayport:
- mst: GUID improvements

bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity

xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF

i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380

amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA

amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines

radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking

msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support

ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs

exynos:
- drop stale MAINTAINERS pattern
- constify struct

loongson:
- use GEM refcount over TTM

mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs

nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's

gm12u320:
- convert to struct drm_edid

gma500:
- update i2c terms

lcdif:
- pixel clock fix

host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()

imx:
- ipuv3: convert to struct drm_edid

omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()

panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp:
- add support for BOE NE140WUM-N6G
- revert support for SDC ATNA45AF01
- visionox-vtdr6130:
- improve error handling
- use devm_regulator_bulk_get_const()
- boe-th101mb31ig002:
- Support for starry-er88577 MIPI-DSI panel plus DT
- Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da:
- Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
- Refactor for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
- support Innolux G070ACE-LH3 plus DT bindings
- support On Tat Industrial Company KD50G21-40NT-A1 plus DT
bindings
- st7701:
- decouple DSI and DRM code
- add SPI support
- support Anbernic RG28XX plus DT bindings

mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller

renesas:
- rz-du: add support for RZ/G2UL plus DT bindings

rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop:
- Support RGB display on Rockchip RK3066
- Support 4096px width

sti:
- convert to struct drm_edid

stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc:
- Fix transparency after disabling plane
- Remove unused interrupt

tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()

vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval

v3d:
- Clean up perfmon

virtio:
- add DRM capset"

* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
drm/xe/xe2hpg: Add Wa_15016589081
drm/xe: Don't keep stale pointer to bo->ggtt_node
drm/xe: fix missing 'xe_vm_put'
drm/xe: fix build warning with CONFIG_PM=n
drm/xe: Suppress missing outer rpm protection warning
drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/i915/bios: fix printk format width
drm/i915/display: Fix BMG CCS modifiers
drm/amdgpu: get rid of bogus includes of fdtable.h
drm/amdkfd: CRIU fixes
drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
drm: new helper: drm_gem_prime_handle_to_dmabuf()
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
...

show more ...

Merge drm/drm-next into drm-intel-next

Need to take some Xe bo definition in here before
we can add the BMG display 64k aligned size restrictions.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.co

Merge drm/drm-next into drm-intel-next

Need to take some Xe bo definition in here before
we can add the BMG display 64k aligned size restrictions.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for v6.12:

UAPI Changes:

virtio:
- Define DRM capset

Cross-subsystem Changes:

d

Merge tag 'drm-misc-next-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for v6.12:

UAPI Changes:

virtio:
- Define DRM capset

Cross-subsystem Changes:

dma-buf:
- heaps: Clean up documentation

printk:
- Pass description to kmsg_dump()

Core Changes:

CI:
- Update IGT tests
- Point upstream repo to GitLab instance

modesetting:
- Introduce Power Saving Policy property for connectors
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support

panic:
- Avoid build-time interference with framebuffer console

docs:
- Document Colorspace property

scheduler:
- Remove full_recover from drm_sched_start

TTM:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory

Driver Changes:

amdgpu:
- Support Power Saving Policy connector property

ast:
- astdp: Support AST2600 with VGA; Clean up HPD

bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable

gma500:
- Update i2c terminology

ivpu:
- Add MODULE_FIRMWARE()

lcdif:
- Fix pixel clock

loongson:
- Use GEM refcount over TTM's

mgag200:
- Improve BMC handling
- Support VBLANK intterupts

nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's

panel:
- Shutdown fixes plus documentation
- Refactor several drivers for better code sharing
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing

sti:
- Fix module owner

stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt

tegra:
- Call drm_atomic_helper_shutdown()

v3d:
- Clean up perfmon

vkms:
- Clean up

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box

show more ...

drm/ttm: Use the LRU walker for eviction

Use the LRU walker for eviction. This helps
removing a lot of code with weird locking
semantics.

The functionality is slightly changed so that
when trylocke

drm/ttm: Use the LRU walker for eviction

Use the LRU walker for eviction. This helps
removing a lot of code with weird locking
semantics.

The functionality is slightly changed so that
when trylocked buffer objects are exhausted, we
continue to interleave walks with ticket-locks while
there is still progress made. The list walks are
not restarted in-between evictions.

Also provide a separate ttm_bo_evict_first()
function for its single user. The context of that
user allows sleeping dma_resv locks.

v6:
- Various cleanups suggested by Matthew Brost.
- Fix error return code of ttm_bo_evict_first(). (Matthew Brost)
- Fix an error check that was inverted. (Matthew Brost)
v7:
- Use s64 rather than long (Christian König)
- Early ttm_resource_cursor_fini() in ttm_bo_evict_first().
- Simplify check for bo_moved in ttm_bo_evict_first().
(Christian König)
- Don't evict pinned bos.

Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-8-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>

show more ...

drm/ttm: Use the LRU walker helper for swapping

Rework the TTM swapping to use the LRU walker helper.
This helps fixing up the ttm_bo_swapout() interface
to be consistent about not requiring any loc

drm/ttm: Use the LRU walker helper for swapping

Rework the TTM swapping to use the LRU walker helper.
This helps fixing up the ttm_bo_swapout() interface
to be consistent about not requiring any locking.

For now mimic the current behaviour of using trylock
only. We could be using ticket-locks here but defer
that until it's deemed necessary. The TTM swapout
functionality is a bit weird anyway since it
alternates between memory types without exhausting
TTM_PL_SYSTEM first.

Intentionally keep pages as the unit of progress since
changing that to bytes is an unrelated change that can
be done later.

v6:
- Improve on error code translation in the swapout callback
(Matthew Brost).
v7:
- Use s64 rather than long.
- Remove ttm_resource_cursor_fini() since it's no longer used.
- Rename ttm_resource_cursor_fini_locked() to
ttm_resource_cursor_fini().
- Don't swap out pinned bos.

Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-7-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>

show more ...

drm/ttm, drm/amdgpu, drm/xe: Consider hitch moves within bulk sublist moves

To address the problem with hitches moving when bulk move
sublists are lru-bumped, register the list cursors with the
ttm_

drm/ttm, drm/amdgpu, drm/xe: Consider hitch moves within bulk sublist moves

To address the problem with hitches moving when bulk move
sublists are lru-bumped, register the list cursors with the
ttm_lru_bulk_move structure when traversing its list, and
when lru-bumping the list, move the cursor hitch to the tail.
This also means it's mandatory for drivers to call
ttm_lru_bulk_move_init() and ttm_lru_bulk_move_fini() when
initializing and finalizing the bulk move structure, so add
those calls to the amdgpu- and xe driver.

Compared to v1 this is slightly more code but less fragile
and hopefully easier to understand.

Changes in previous series:
- Completely rework the functionality
- Avoid a NULL pointer dereference assigning manager->mem_type
- Remove some leftover code causing build problems
v2:
- For hitch bulk tail moves, store the mem_type in the cursor
instead of with the manager.
v3:
- Remove leftover mem_type member from change in v2.
v6:
- Add some lockdep asserts (Matthew Brost)
- Avoid NULL pointer dereference (Matthew Brost)
- No need to check bo->resource before dereferencing
bo->bulk_move (Matthew Brost)

Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>

show more ...

drm/ttm: Use LRU hitches

Have iterators insert themselves into the list they are iterating
over using hitch list nodes. Since only the iterator owner
can remove these list nodes from the list, it's

drm/ttm: Use LRU hitches

Have iterators insert themselves into the list they are iterating
over using hitch list nodes. Since only the iterator owner
can remove these list nodes from the list, it's safe to unlock
the list and when continuing, use them as a starting point. Due to
the way LRU bumping works in TTM, newly added items will not be
missed, and bumped items will be iterated over a second time before
reaching the end of the list.

The exception is list with bulk move sublists. When bumping a
sublist, a hitch that is part of that sublist will also be moved
and we might miss items if restarting from it. This will be
addressed in a later patch.

Changes in previous series:
- Updated ttm_resource_cursor_fini() documentation.
v2:
- Don't reorder ttm_resource_manager_first() and _next().
(Christian König).
- Use list_add instead of list_move
(Christian König)
v3:
- Split into two patches, one cleanup, one new functionality
(Christian König)
- use ttm_resource_cursor_fini_locked() instead of open-coding
(Matthew Brost)

Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-4-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>

show more ...

drm/ttm: Slightly clean up LRU list iteration

To make the transition to using lru hitches easier,
simplify the ttm_resource_manager_next() interface to only take
the cursor and reuse ttm_resource_ma

drm/ttm: Slightly clean up LRU list iteration

To make the transition to using lru hitches easier,
simplify the ttm_resource_manager_next() interface to only take
the cursor and reuse ttm_resource_manager_next() functionality
from ttm_resource_manager_first().

Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-3-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>

show more ...

drm/ttm: Allow TTM LRU list nodes of different types

To be able to handle list unlocking while traversing the LRU
list, we want the iterators not only to point to the next
position of the list trave

drm/ttm: Allow TTM LRU list nodes of different types

To be able to handle list unlocking while traversing the LRU
list, we want the iterators not only to point to the next
position of the list traversal, but to insert themselves as
list nodes at that point to work around the fact that the
next node might otherwise disappear from the list while
the iterator is pointing to it.

These list nodes need to be easily distinguishable from other
list nodes so that others traversing the list can skip
over them.

So declare a struct ttm_lru_item, with a struct list_head member
and a type enum. This will slightly increase the size of a
struct ttm_resource.

Changes in previous series:
- Update enum ttm_lru_item_type documentation.
v3:
- Introduce ttm_lru_first_res_or_null()
(Christian König, Thomas Hellström)
v5:
- Update also the TTM test code (Xe CI).

Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge drm/drm-next into drm-intel-next

A backmerge to sync xe and i915 and allow us to merge
"Enable display support for Battlemage" series
through drm-intel

Link: https://patchwork.freedesktop.org

Merge drm/drm-next into drm-intel-next

A backmerge to sync xe and i915 and allow us to merge
"Enable display support for Battlemage" series
through drm-intel

Link: https://patchwork.freedesktop.org/series/132429/

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Avoid falling too far behind drm-next.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>