Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.q

Merge tag 'v6.19-rc1' into msm-next

Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.20 (7.0?) release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.18' into next

Sync up with the mainline to bring in the latest APIs.

Merge drm/drm-next into drm-intel-next

Backmerge to get the topic/drm-intel-plane-color-pipeline branch
contents.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in a needed dependency for the Xe VFIO
driver variant. This should ideally have been done before we
commited that, so we now have a small win

Merge drm/drm-next into drm-xe-next

Backmerging to bring in a needed dependency for the Xe VFIO
driver variant. This should ideally have been done before we
commited that, so we now have a small window in drm-xe-next
where that driver doesn't compile.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512030331.I8CveRre-lkp@intel.com/
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

show more ...

Merge drm/drm-next into drm-xe-next-fixes

Backmerging to be able do to a clean PR.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge branch 'for-6.19/hid-bpf' into for-linus

- Bring in a couple more BPF drivers for various devices (Benjamin Tissoires)

Merge branch 'for-linus' into for-next

Pull remaining 6.18-devel changes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A small pile of driver specific fixes that came in during the pa

Merge tag 'asoc-fix-v6.18-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A small pile of driver specific fixes that came in during the past few
weeks, none of them especially major.

show more ...

regulator: Add FP9931/JD9930

Merge series from Andreas Kemnade <andreas@kemnade.info>:

Add a driver for the FP9931/JD9930 regulator which provides the
comparatively high voltages needed for electro

regulator: Add FP9931/JD9930

Merge series from Andreas Kemnade <andreas@kemnade.info>:

Add a driver for the FP9931/JD9930 regulator which provides the
comparatively high voltages needed for electronic paper displays.

Datasheet for the FP9931 is at
https://www.fitipower.com/dl/file/flXa6hIchVeu0W3K

Although it is in English, it seems to be only downloadable
from the Chinese part of that website.
For the JD9930 there can be a datasheet found at
https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/JD9930_2D00_0.7_2D00_JUN_2D00_2019.pdf

To simplify things, include the hwmon part directly which is only
one register read and there are not other functions besides
regulators in this chip.

show more ...

Merge tag 'v6.18-rc6' into drm-next

Linux 6.18-rc6

Backmerge in order to merge msm next

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'reset-gpio-for-v6.19' of https://git.pengutronix.de/git/pza/linux into gpio/for-next

Reset/GPIO/swnode changes for v6.19

* Extend software node implementation, allowing its properties to

Merge tag 'reset-gpio-for-v6.19' of https://git.pengutronix.de/git/pza/linux into gpio/for-next

Reset/GPIO/swnode changes for v6.19

* Extend software node implementation, allowing its properties to reference
existing firmware nodes.
* Update the GPIO property interface to use reworked swnode macros.
* Rework reset-gpio code to use GPIO lookup via swnode.
* Fix spi-cs42l43 driver to work with swnode changes.

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.18-rc5+

Cross-merge BPF and other fixes after downstream PR.

Minor conflict in kernel/bpf/helpers.c

Signed-off-by: Alexei Starov

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after 6.18-rc5+

Cross-merge BPF and other fixes after downstream PR.

Minor conflict in kernel/bpf/helpers.c

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

ASoC: codecs: lpass-macro: complete sm6115 support

Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:

This patch series fixes SM6115 lpass codec macro support and adding

ASoC: codecs: lpass-macro: complete sm6115 support

Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:

This patch series fixes SM6115 lpass codec macro support and adding
missing dt-bindings to complete support for SM6115.

SM6115 lpass codec macro support is added partially and broken to some
extent, Fix this broken support and add complete lpass macro support for
this SoC.

show more ...

spi-cadence: support transmission with

Merge series from Jun Guo <jun.guo@cixtech.com>:

The Cadence SPI IP supports configurable FIFO data widths during
integration. On some SoCs, the FIFO data wid

spi-cadence: support transmission with

Merge series from Jun Guo <jun.guo@cixtech.com>:

The Cadence SPI IP supports configurable FIFO data widths during
integration. On some SoCs, the FIFO data width is designed to be 16 or
32 bits at the chip design stage. However, the current driver only
supports communication with an 8-bit FIFO data width. Therefore, these
patches are added to enable the driver to support communication with
16-bit and 32-bit FIFO data widths.

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.18-rc6).

No conflicts, adjacent changes in:

drivers/net/phy/micrel.c
96a917

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.18-rc6).

No conflicts, adjacent changes in:

drivers/net/phy/micrel.c
96a9178a29a6 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
61b7ade9ba8c ("net: phy: micrel: Add support for non PTP SKUs for lan8814")

and a trivial one in tools/testing/selftests/drivers/net/Makefile.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v6.18-rc5' into media-next

Linux 6.18-rc5

* tag 'v6.18-rc5': (1016 commits)
Linux 6.18-rc5
kbuild: Let kernel-doc.py use PYTHON3 override
rtc: rx8025: fix incorrect register refere

Merge tag 'v6.18-rc5' into media-next

Linux 6.18-rc5

* tag 'v6.18-rc5': (1016 commits)
Linux 6.18-rc5
kbuild: Let kernel-doc.py use PYTHON3 override
rtc: rx8025: fix incorrect register reference
Revert "drm/nouveau: set DMA mask before creating the flush page"
io_uring: fix regbuf vector size truncation
compiler_types: Move unused static inline functions warning to W=2
smb: client: validate change notify buffer before copy
tracing/tools: Fix incorrcet short option in usage text for --threads
drm/xe: Enforce correct user fence signaling order using
x86/microcode/AMD: Add more known models to entry sign checking
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe
tracing: tprobe-events: Fix to register tracepoint correctly
gpio: tb10x: Drop unused tb10x_set_bits() function
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
...

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Backmerge to sync with drm/xe changes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Initial backmerge for 6.19 development.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are f

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are followup fixes to be applied.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc5' into objtool/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>