Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and

Merge tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.

On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.

Aside from these, we see actual new hardware support in a few areas:

- The Apple platform gets a new driver for low power states

- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.

- Amlogic SoC support for A1 and T7 is added

- The Mediatek MMSYS driver is refactored as a cleanup"

* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...

show more ...

drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM

QCOM_UBWC_CONFIG is about to depend on QCOM_SMEM. Guard the DRM_MSM
select with 'if ARCH_QCOM && QCOM_SMEM', and add
'depends on QCOM_SMEM |

drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM

QCOM_UBWC_CONFIG is about to depend on QCOM_SMEM. Guard the DRM_MSM
select with 'if ARCH_QCOM && QCOM_SMEM', and add
'depends on QCOM_SMEM || QCOM_SMEM=n' so a built-in driver is never
selected against a missing or modular SMEM.

Fixes: 1b445022d1d0 ("soc: qcom: ubwc: Get HBB from SMEM")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'qcom-drivers-for-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

Qualcomm driver updates for v7.3

Add Maili platform bindings for SCM, IMEM, AOSS, and

Merge tag 'qcom-drivers-for-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

Qualcomm driver updates for v7.3

Add Maili platform bindings for SCM, IMEM, AOSS, and PMIC GLINK. Add
Shikra IMEM, RPM SMD, LLCC, and UBWC support, including handling for
firmware-configured LLCC ECC interrupts.

Add the generic Peripheral Authentication Service with SCM and OP-TEE
backends, and migrate the MSM DRM and IPA drivers to it.

Add SCM SMC-call tracepoints and configurable minidump delivery through
always-on SRAM. Correct SCM download-mode pointer ordering and improve
download-mode probe diagnostics.

Rework the UBWC configuration database and add Milos and Shikra
configuration. Add protection-domain mappings for SA8775P and QCS8300,
support newer ICE versions, Hawi subsystem statistics, and SDM850
identification.

Simplify Qualcomm SoC Kconfig selection and architecture dependencies.
Use managed resources in EBI2 and RPMh RSC probe paths to correct cleanup
on failures.

* tag 'qcom-drivers-for-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (44 commits)
soc: qcom: llcc: Skip ECC interrupt setup on Shikra, pre-configured by DSF
dt-bindings: sram: Document qcom,shikra-imem compatible
net: ipa: Switch to generic PAS TZ APIs
firmware: qcom: scm: Add minidump SRAM support
firmware: qcom: scm: use dev_err_probe() for dload address failure
firmware: qcom: scm: Fix missing smp_load_acquire()
dt-bindings: firmware: qcom,scm: Add minidump SRAM property
drm/msm: Switch to generic PAS TZ APIs
bus: qcom-ebi2: use managed resources for clocks and children
soc: qcom: rpmh-rsc: manage PM notifiers with devres
firmware: qcom: scm: Allow QSEECOM on Honor Magicbook Art 14
firmware: qcom: scm: instrument SMC call path with tracepoints
firmware: qcom: scm: add trace events for the SMC call interface
soc: qcom: Avoid SCM and SPM for cpuidle drivers
soc: qcom: Make important drivers default
soc: qcom: Restrict drivers per ARM/ARM64
soc: qcom: Hide all drivers behind selectable menu
MAINTAINERS: Add maintainer entry for Qualcomm PAS TZ service
firmware: qcom: Add a PAS TEE service
firmware: qcom_scm: Migrate to generic PAS service
...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

drm/msm: Switch to generic PAS TZ APIs

Switch drm/msm client drivers over to generic PAS TZ APIs. Generic PAS
TZ service allows to support multiple TZ implementation backends like QTEE
based SCM PAS

drm/msm: Switch to generic PAS TZ APIs

Switch drm/msm client drivers over to generic PAS TZ APIs. Generic PAS
TZ service allows to support multiple TZ implementation backends like QTEE
based SCM PAS service, OP-TEE based PAS service and any further future TZ
backend service.

Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Tested-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> # Lemans
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260702115835.167602-9-sumit.garg@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are f

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are followup fixes to be applied.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge commit 'linus' into core/bugs, to resolve conflicts

Resolve conflicts with this commit that was developed in parallel
during the merge window:

8c8efa93db68 ("x86/bug: Add ARCH_WARN_ASM macro

Merge commit 'linus' into core/bugs, to resolve conflicts

Resolve conflicts with this commit that was developed in parallel
during the merge window:

8c8efa93db68 ("x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust")

Conflicts:
arch/riscv/include/asm/bug.h
arch/x86/include/asm/bug.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.18 merge window.

Merge tag 'v6.17-rc2' into HEAD

Sync up with mainline to bring in changes to include/linux/sprintf.h

Merge drm/drm-next into drm-intel-next

Catching up with some display dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-xe-next

Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.

Signed-off-by: Lucas De

Merge drm/drm-next into drm-xe-next

Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.17-rc1. Begins a new release
cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
"Highlights:

- Intel xe enable Panthor Lake, started adding WildCat Lake

- am

Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
"Highlights:

- Intel xe enable Panthor Lake, started adding WildCat Lake

- amdgpu has a bunch of reset improvments along with the usual IP
updates

- msm got VM_BIND support which is important for vulkan sparse memory

- more drm_panic users

- gpusvm common code to handle a bunch of core SVM work outside
drivers.

Detail summary:

Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe

core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify

dma-buf:
- heaps: Give CMA heap a stable name

ci:
- add device tree validation and kunit

displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers

fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches

fence:
- fix UAF issues

format-helper:
- improve tests

gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM

ttm:
- improve eviction

sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements

color mgmt:
- add hardware gamma LUT handling helpers

bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling

panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B

hdmi:
- add CEC handling
- YUV420 output support

xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch

i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring

amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support

amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory

radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version

msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support

nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute

ivpu:
- Add Wildcat Lake support
- Add turbo flag

ast:
- improve hardware generations implementation

imx:
- IMX8qxq Display Controller support

lima:
- Rockchip RK3528 GPU support

nouveau:
- fence handling cleanup

panfrost:
- MT8370 support
- bo labeling
- 64-bit register access

qaic:
- add RAS support

rockchip:
- convert inno_hdmi to a bridge

rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support

sitronix:
- ST7567 support

sun4i:
- add H616 support

tidss:
- add TI AM62L support
- AM65x OLDI bridge support

bochs:
- drm panic support

vkms:
- YUV and R* format support
- use faux device

vmwgfx:
- fence improvements

hyperv:
- move out of simple
- add drm_panic support"

* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...

show more ...

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

Pull in drm-intel-next for the updates to drm panic handling.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

Merge tag 'drm-msm-next-2025-07-05' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.17

CI:
- uprev mesa and ci-templates
- use shallow clone to speed up build jobs
- remove s

Merge tag 'drm-msm-next-2025-07-05' of https://gitlab.freedesktop.org/drm/msm into drm-next

Updates for v6.17

CI:
- uprev mesa and ci-templates
- use shallow clone to speed up build jobs
- remove sdm845/cheza jobs. These runners are no more (RIP
dear chezas)
- fix runner tag for i915 cml runners
- uprev igt to pull in msm test fixes

Core:
- VM_BIND support!
- single source of truth for UBWC configuration. Adds a global soc
driver for UBWC config which is used from display and GPU. (And
later vidc/camera/etc)
- Decouple ties between GPU and KMS, adding a `separate_gpu_kms`
modparam to allow the GPU and KMS to bind to separate DRM devices.
This should better deal with more exotic SoC configurations where
the number of GPUs is different from number of DPUs. The default
behavior is to still come up as a single unified DRM device to
avoid surprising userspace.

DP:
- major rework of the I/O accessors

DPU:
- use version checks instead of feature bits
- SM8750 support
- set min_prefill_lines for SC8180X

DSI:
- SM8750 support

GPU:
- speedbin support for X1-85
- X1-45 support

MDSS:
- SM8750 support

Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Robin Clark <robin.clark@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACSVV0217R+kpoWQJeuYGHf6q_4aFyEJuKa=dZZKOnLQzFwppg@mail.gmail.com

show more ...

drm/msm: rearrange symbol selection

Move symbol selection to be more fine grained: select DP helpers only if
DP driver is also enabled, move KMS and display helpers to the newly
introduced DRM_MSM_K

drm/msm: rearrange symbol selection

Move symbol selection to be more fine grained: select DP helpers only if
DP driver is also enabled, move KMS and display helpers to the newly
introduced DRM_MSM_KMS.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662589/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

drm/msm: make it possible to disable KMS-related code.

If the Adreno device is used in a headless mode, there is no need to
build all KMS components. Build corresponding parts conditionally, only
se

drm/msm: make it possible to disable KMS-related code.

If the Adreno device is used in a headless mode, there is no need to
build all KMS components. Build corresponding parts conditionally, only
selecting them if modeset support is actually required.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662581/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

drm/msm: Use the central UBWC config database

As discussed a lot in the past, the UBWC config must be coherent across
a number of IP blocks (currently display and GPU, but it also may/will
concern c

drm/msm: Use the central UBWC config database

As discussed a lot in the past, the UBWC config must be coherent across
a number of IP blocks (currently display and GPU, but it also may/will
concern camera/video as the drivers evolve).

So far, we've been trying to keep the values reasonable in each of the
two drivers separately, but it really make sense to do so centrally,
especially given certain fields (e.g. HBB) may need to be gathered
dynamically.

To reduce room for error, move to fetching the config from a central
source, so that the data programmed into the hardware is consistent
across all multimedia blocks that request it.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/660963/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

drm/msm: drm_gpuvm conversion

Now that we've realigned deletion and allocation, switch over to using
drm_gpuvm/drm_gpuva. This allows us to support multiple VMAs per BO per
VM, to allow mapping dif

drm/msm: drm_gpuvm conversion

Now that we've realigned deletion and allocation, switch over to using
drm_gpuvm/drm_gpuva. This allows us to support multiple VMAs per BO per
VM, to allow mapping different parts of a single BO at different virtual
addresses, which is a key requirement for sparse/VM_BIND.

This prepares us for using drm_gpuvm to translate a batch of MAP/
MAP_NULL/UNMAP operations from userspace into a sequence of map/remap/
unmap steps for updating the page tables.

Since, unlike our prior vm/vma setup, with drm_gpuvm the vm_bo holds a
reference to the GEM object. To prevent reference loops causing us to
leak all GEM objects, we implicitly tear down the mapping when the GEM
handle is close or when the obj is unpinned. Which means the submit
needs to also hold a reference to the vm_bo, to prevent the VMA from
being torn down while the submit is in-flight.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661479/

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm-next-2025-05-28 into drm-misc-next

Christian needs a recent drm-next branch to merge fence patches.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...