Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace

Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.

Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe

Full detail summary:

New driver:
- Arm Ethos-U65/U85 accel driver

Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client

Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects

gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)

atomic:
- cleanup and improve state handling interfaces

buddy:
- optimize block management

dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation

dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput

ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling

amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support

amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch

radeon:
- refactor CIK/SI enablement

xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35

i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD

panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0

bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support

nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification

nova-drm:
- select NOVA_CORE
- 64-bit only

nouveau:
- improve reclocking on tegra 186+
- add large page and compression support

msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported

tegra:
- NVJPG driver

panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling

panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job

mediatek:
- MT8195/88 HDMIv2/DDCv2 support

rockchip:
- dsi: add support for RK3368

amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support

imx:
- add driver for HDMI TX Parallel audio interface

ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics

tidss:
- convert to drm logging
- logging cleanup

ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model

atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler

solomon:
- use drm helper for get_modes and move_valid

sitronix:
- fix output position when clearing screens

qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support

sun4i:
- layer refactors to decouple plane from output
- improve DE33 support

vc4:
- switch to generic CEC helpers

komeda:
- use drm_ logging functions

vkms:
- configfs support for display configuration

vgem:
- fix fence timer deadlock

etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"

* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...

show more ...

Merge tag 'amd-drm-next-6.19-2025-11-14' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.19-2025-11-14:

amdgpu:
- RAS updates
- GC12 DCC P2P fix
- Documentation fixes
- P

Merge tag 'amd-drm-next-6.19-2025-11-14' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.19-2025-11-14:

amdgpu:
- RAS updates
- GC12 DCC P2P fix
- Documentation fixes
- Power limit code cleanup
- Userq updates
- VRR fix
- SMART OLED support
- DSC refactor for DCN 3.5
- Replay updates
- DC clockgating updates
- HDCP refactor
- ISP fix
- SMU 13.0.12 updates
- JPEG 5.0.1 fix
- VCE1 support
- Enable DC by default on SI
- Refactor CIK and SI enablement
- Enable amdgpu by default for CI dGPUs
- XGMI fixes
- SR-IOV fixes
- Memory allocation critical path fixes
- Enable amdgpu by default on SI dGPUs

amdkfd:
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch

radeon:
- Refactor CIK and SI enablement

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20251114192553.442621-1-alexander.deucher@amd.com

show more ...

drm/amdgpu: Use amdgpu by default on SI dedicated GPUs (v2)

Now that the DC analog connector support and VCE1 support landed,
amdgpu is at feature parity with the old radeon driver
on SI dGPUs.

Ena

drm/amdgpu: Use amdgpu by default on SI dedicated GPUs (v2)

Now that the DC analog connector support and VCE1 support landed,
amdgpu is at feature parity with the old radeon driver
on SI dGPUs.

Enabling the amdgpu driver by default for SI dGPUs has the
following benefits:

- More stable OpenGL support through RadeonSI
- Vulkan support through RADV
- Improved performance
- Better display features through DC

Users who want to keep using the old driver can do so using:
amdgpu.si_support=0 radeon.si_support=1

v2:
- Update documentation in Kconfig file

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/amdgpu: Use amdgpu by default on CIK dedicated GPUs

The amdgpu driver has been working well on CIK dGPUs for years.
Now that the DC analog connector support landed,
amdgpu is at feature parity w

drm/amdgpu: Use amdgpu by default on CIK dedicated GPUs

The amdgpu driver has been working well on CIK dGPUs for years.
Now that the DC analog connector support landed,
amdgpu is at feature parity with the old radeon driver
on CIK dGPUs.

Enabling the amdgpu driver by default for CIK dGPUs has the
following benefits:

- More stable OpenGL support through RadeonSI
- Vulkan support through RADV
- Improved performance
- Better display features through DC

Users who want to keep using the old driver can do so using:
amdgpu.cik_support=0 radeon.cik_support=1

v2:
- Update documentation in Kconfig file
v3:
- Rebase documentation updates (Alex)

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are f

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are followup fixes to be applied.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge branch 'for-6.17/amd-sfh' into for-linus

- add support for operating modes (Basavaraj Natikar)

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc3

Cross-merge BPF, perf and other fixes after downstream PRs.
It restores BPF CI to green after critical fix
commit bc4394e5e79c (

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf after rc3

Cross-merge BPF, perf and other fixes after downstream PRs.
It restores BPF CI to green after critical fix
commit bc4394e5e79c ("perf: Fix the throttle error of some clock events")

No conflicts.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.16-rc2).

No conflicts or adjacent changes.

Signed-off-by: Jakub Kicinski <kub

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.16-rc2).

No conflicts or adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'drm-next-2025-06-06' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
"This is pretty much two weeks worth of fixes, plus one thing that
might be considere

Merge tag 'drm-next-2025-06-06' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
"This is pretty much two weeks worth of fixes, plus one thing that
might be considered next: amdkfd is now able to be enabled on risc-v
platforms.

Otherwise, amdgpu and xe with the majority of fixes, and then a
smattering all over.

panel:
- nt37801: fix IS_ERR
- nt37801: fix KConfig

connector:
- Fix null deref in HDMI audio helper.

bridge:
- analogix_dp: fixup clk-disable removal

nouveau:
- minor typo fix (',' vs ';')

msm:
- mailmap updates

i915:
- Fix the enabling/disabling of DP audio SDP splitting
- Fix PSR register definitions for ALPM
- Fix u32 overflow in SNPS PHY HDMI PLL setup
- Fix GuC pending message underflow when submit fails
- Fix GuC wakeref underflow race during reset

xe:
- Two documentation fixes
- A couple of vm init fixes
- Hwmon fixes
- Drop reduntant conversion to bool
- Fix CONFIG_INTEL_VSEC dependency
- Rework eviction rejection of bound external bos
- Stop re-submitting signalled jobs
- A couple of pxp fixes
- Add back a fix that got lost in a merge
- Create LRC bo without VM
- Fix for the above fix

amdgpu:
- UserQ fixes
- SMU 13.x fixes
- VCN fixes
- JPEG fixes
- Misc cleanups
- runtime pm fix
- DCN 4.0.1 fixes
- Misc display fixes
- ISP fix
- VRAM manager fix
- RAS fixes
- IP discovery fix
- Cleaner shader fix for GC 10.1.x
- OD fix
- Non-OLED panel fix
- Misc display fixes
- Brightness fixes

amdkfd:
- Enable CONFIG_HSA_AMD on RISCV
- SVM fix
- Misc cleanups
- Ref leak fix
- WPTR BO fix

radeon:
- Misc cleanups"

* tag 'drm-next-2025-06-06' of https://gitlab.freedesktop.org/drm/kernel: (105 commits)
drm/nouveau/vfn/r535: Convert comma to semicolon
drm/xe: remove unmatched xe_vm_unlock() from __xe_exec_queue_init()
drm/xe: Create LRC BO without VM
drm/xe/guc_submit: add back fix
drm/xe/pxp: Clarify PXP queue creation behavior if PXP is not ready
drm/xe/pxp: Use the correct define in the set_property_funcs array
drm/xe/sched: stop re-submitting signalled jobs
drm/xe: Rework eviction rejection of bound external bos
drm/xe/vsec: fix CONFIG_INTEL_VSEC dependency
drm/xe: drop redundant conversion to bool
drm/xe/hwmon: Move card reactive critical power under channel card
drm/xe/hwmon: Add support to manage power limits though mailbox
drm/xe/vm: move xe_svm_init() earlier
drm/xe/vm: move rebind_work init earlier
MAINTAINERS: .mailmap: update Rob Clark's email address
mailmap: Update entry for Akhil P Oommen
MAINTAINERS: update my email address
MAINTAINERS: drop myself as maintainer
drm/i915/display: Fix u32 overflow in SNPS PHY HDMI PLL setup
drm/amd/display: Fix default DC and AC levels
...

show more ...

Merge tag 'amd-drm-fixes-6.16-2025-05-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.16-2025-05-29:

amdgpu:
- UserQ fixes
- SMU 13.x fixes
- VCN fixes
- JPEG fixes

Merge tag 'amd-drm-fixes-6.16-2025-05-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.16-2025-05-29:

amdgpu:
- UserQ fixes
- SMU 13.x fixes
- VCN fixes
- JPEG fixes
- Misc cleanups
- runtime pm fix
- DCN 4.0.1 fixes
- Misc display fixes
- ISP fix
- VRAM manager fix
- RAS fixes

amdkfd:
- SVM fix
- Misc cleanups
- Ref leak fix
- WPTR BO fix

radeon:
- Misc cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250529205215.6790-1-alexander.deucher@amd.com

show more ...

drm/amd/amdgpu: Add GPIO resources required for amdisp

ISP is a child device to GFX, and its device specific information
is not available in ACPI. Adding the 2 GPIO resources required for
ISP_v4_1_1

drm/amd/amdgpu: Add GPIO resources required for amdisp

ISP is a child device to GFX, and its device specific information
is not available in ACPI. Adding the 2 GPIO resources required for
ISP_v4_1_1 in amdgpu_isp driver.

- GPIO 0 to allow sensor driver to enable and disable sensor module.
- GPIO 85 to allow ISP driver to enable and disable ISP RGB streaming mode.

Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Print the actual delay time in pci_bridge_wait_for_se

Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)

- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)

Resource management:

- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)

- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)

- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)

- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)

Error handling:

- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)

- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)

- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)

- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)

Power management:

- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)

- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)

Power control:

- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)

- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)

Bandwidth control:

- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)

- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)

PCIe native device hotplug:

- Ignore Presence Detect Changed caused by DPC.

pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)

- Ignore Link Down/Up caused by Secondary Bus Reset.

On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)

Virtualization:

- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)

Endpoint framework:

- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)

- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)

- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)

- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)

- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)

Common host controller library:

- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)

Apple PCIe controller driver:

- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)

- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)

- Skip ports disabled in DT when setting up ports (Janne Grunau)

- Add t6020 compatible string (Alyssa Rosenzweig)

- Add T602x PCIe support (Hector Martin)

- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)

- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)

- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)

- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)

Cadence PCIe controller driver:

- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)

- Make the cadence core buildable as a module (Kishon Vijay Abraham I)

- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)

Freescale i.MX6 PCIe controller driver:

- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)

- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)

- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)

- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)

- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)

- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)

- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)

Mobiveil PCIe controller driver:

- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)

NVIDIA Tegra194 PCIe controller driver:

- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)

Qualcomm PCIe controller driver:

- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)

- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)

- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)

- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)

- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)

Renesas R-Car PCIe controller driver:

- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)

- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)

Rockchip PCIe controller driver:

- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)

- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)

Rockchip DesignWare PCIe controller driver:

- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)

- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)

- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)

- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)

Synopsys DesignWare PCIe controller driver:

- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)

- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)

- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)

TI J721E PCIe driver:

- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)

- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)

Device tree bindings:

- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)

- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)

- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)

- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)

- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)

- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)

- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)

- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)

- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)

Miscellaneous:

- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)

- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)

- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)

- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"

* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...

show more ...

Merge branch 'pci/misc'

- Drop 'pci' suffix from intel_mid_pci.c filename to match similar files
(Andy Shevchenko)

- All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU
to

Merge branch 'pci/misc'

- Drop 'pci' suffix from intel_mid_pci.c filename to match similar files
(Andy Shevchenko)

- All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU
to simplify build testing and avoid inadvertent build regressions (Arnd
Bergmann)

- Update driver path in PCI NVMe function documentation (Rick Wertenbroek)

- Remove unused pci_printk() (Ilpo Järvinen)

- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)

- Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof
Wilczyński)

- Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan
Sadhasivam)

* pci/misc:
MAINTAINERS: Update Manivannan Sadhasivam email address
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
Documentation: Fix path for NVMe PCI endpoint target driver
PCI: Add CONFIG_MMU dependency
x86/PCI: Drop 'pci' suffix from intel_mid_pci.c

show more ...

PCI: Add CONFIG_MMU dependency

It turns out that there are no platforms that have PCI but don't have an
MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing
kernels for those p

PCI: Add CONFIG_MMU dependency

It turns out that there are no platforms that have PCI but don't have an
MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing
kernels for those platforms a lot, and avoids a lot of inadvertent build
regressions.

Add a dependency for CONFIG_PCI and remove all the ones for PCI specific
device drivers that are currently marked not having it.

There are a few platforms that have an optional MMU, but they usually
cannot have PCI at all. The one exception is Coldfire MCF54xx, but this is
mainly for historic reasons, and anyone using those chips should really use
the MMU these days.

Link: https://lore.kernel.org/lkml/a41f1b20-a76c-43d8-8c36-f12744327a54@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20250423202215.3315550-1-arnd@kernel.org

show more ...

drm/amdgpu: remove DRM_AMDGPU_NAVI3X_USERQ config for UQ

DRM_AMDGPU_NAVI3X_USERQ config support is not required for
usermode queue.

v2: rebase.

Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelva

drm/amdgpu: remove DRM_AMDGPU_NAVI3X_USERQ config for UQ

DRM_AMDGPU_NAVI3X_USERQ config support is not required for
usermode queue.

v2: rebase.

Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/amdgpu/userq: remove BROKEN from config

This can be enabled now. We have the firmware checks
in place.

Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deu

drm/amdgpu/userq: remove BROKEN from config

This can be enabled now. We have the firmware checks
in place.

Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/amdgpu/Kconfig: fix wording of DRM_AMDGPU_NAVI3X_USERQ

The feature is not navi3x specific at this point.

Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.de

drm/amdgpu/Kconfig: fix wording of DRM_AMDGPU_NAVI3X_USERQ

The feature is not navi3x specific at this point.

Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

drm/amdgpu: add kernel config for gfx-userqueue

This patch:
- adds a kernel config option "CONFIG_DRM_AMDGPU_NAVI3X_USERQ"
- moves the usequeue initialization code for all IPs under
this flag
- co

drm/amdgpu: add kernel config for gfx-userqueue

This patch:
- adds a kernel config option "CONFIG_DRM_AMDGPU_NAVI3X_USERQ"
- moves the usequeue initialization code for all IPs under
this flag
- cover the core userqueue functions under this config
- adds stub function for userqueue ioctl.

so that the userqueue works only when the config is enabled.

V9: Introduce this patch
V10: Call it CONFIG_DRM_AMDGPU_NAVI3X_USERQ instead of
CONFIG_DRM_AMDGPU_USERQ_GFX (Christian)
V11: Add GFX in the config help description message.
V12: Add depends on BROKEN for this config, remove this when the rest of
the code is available.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.15 merge window.