Merge 6.13-rc3 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.13-rc3 into tty-next

We need the serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.13-rc3 into staging-next

We need the gpib build fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'nand/for-6.14' into mtd/next

* Raw NAND changes

A new controller driver, from Nuvoton, has been merged.

Bastien Curutchet has contributed a series improving the Davinci
controller drive

Merge tag 'nand/for-6.14' into mtd/next

* Raw NAND changes

A new controller driver, from Nuvoton, has been merged.

Bastien Curutchet has contributed a series improving the Davinci
controller driver, both on the organization of the code, but also on the
performance side. The binding has also been converted to yaml, received
a new OOB layout and now supports on-die ECC engines.

The Qualcomm controller driver has been deeply cleaned to extract some
parts of the code into a shared file with the Qualcomm SPI memory
controller.

Aside from these main changes, the Cadence binding has been converted to
yaml, the brcmnand controller driver has received a small fix, otherwise
some more minor changes have also made their way in.

* SPI NAND changes

The SPI NAND subsystem has seen a great improvement, with the advent of
DTR operations (DDR operations, which may be extended to the address
cycles). The first vendor driver to benefit from these improvements is
the Winbond driver.

A new manufacturer driver is added SkyHigh, with a new constraint for
the core, it is impossible to disable the on-die ECC engine.

A Foresee device is also now supported.

show more ...

Merge tag 'spi-mem-dtr-2' into nand/next

spi: Support DTR in spi-mem

Changes to support DTR with spi-mem.

ASoC: Merge up v6.13-rc6

This helps several of my boards in CI.

Merge branch 'for-linus' into for-next

Pull 6.13 devel branch for further development of sequencer stuff.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Cross-merge bpf fixes after downstream PR.

No conflicts.

Adjacent changes in:
Auto-merging include/linux/bpf.h
Auto-merging include/linu

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Cross-merge bpf fixes after downstream PR.

No conflicts.

Adjacent changes in:
Auto-merging include/linux/bpf.h
Auto-merging include/linux/bpf_verifier.h
Auto-merging kernel/bpf/btf.c
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/trace/bpf_trace.c
Auto-merging tools/testing/selftests/bpf/progs/test_tp_btf_nullable.c

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

spi: Merge up v6.13-rc6

This fixes the i.MX6 and newer Meson platforms in my CI.

Expand SoundWire MBQ register map support

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

The current SDCA MBQ (Multi-Byte Quantities) register map only
supports 16-bit types, add

Expand SoundWire MBQ register map support

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

The current SDCA MBQ (Multi-Byte Quantities) register map only
supports 16-bit types, add support for more sizes and then update
the rt722 driver to use the new support. We also add support for
the deferring feature of MBQs to allow hardware to indicate it is
not currently ready to service a read/write.

Afraid I don't have hardware to test the rt722 change so it is
only build tested, but I thought it good to include a change to
demonstrate the new features in use.

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.13-rc4).

No conflicts.

Adjacent changes:

drivers/net/ethernet/renesas/rswitc

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-6.13-rc4).

No conflicts.

Adjacent changes:

drivers/net/ethernet/renesas/rswitch.h
32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure")
922b4b955a03 ("net: renesas: rswitch: rework ts tags management")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge drm/drm-next into drm-misc-next-fixes

drm-next has the dmem cgroup patches we need to merge fixes for.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Backmerge to get the DRM DP payload and ACT helpers to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Merge pm/opp tree to get dev_pm_opp_get_bw()

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge branch 'locking/urgent'

Sync with urgent -- avoid conflicts.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.13-rc3' into drm-next

Backmerge linux 6.13-rc3 as amd next has some dependencies on fixes in it.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge drm/drm-next into drm-intel-next

Catching up with 6.13-rc2.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-xe-next

A backmerge to get the PMT preparation work for
merging the BMG PMT support.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Kickstart 6.14 cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'asoc-fix-v6.13-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A mix of quirks and small fixes, nothing too major anywhere.

Merge tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

- Limit EFI zboot to GZIP and ZSTD before it comes in wider use

- F

Merge tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

- Limit EFI zboot to GZIP and ZSTD before it comes in wider use

- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format

- Drop some unused code

* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD

show more ...

efi/zboot: Limit compression options to GZIP and ZSTD

For historical reasons, the legacy decompressor code on various
architectures supports 7 different compression types for the compressed
kernel i

efi/zboot: Limit compression options to GZIP and ZSTD

For historical reasons, the legacy decompressor code on various
architectures supports 7 different compression types for the compressed
kernel image.

EFI zboot is not a compression library museum, and so the options can be
limited to what is likely to be useful in practice:

- GZIP is tried and tested, and is still one of the fastest at
decompression time, although the compression ratio is not very high;
moreover, Fedora is already shipping EFI zboot kernels for arm64 that
use GZIP, and QEMU implements direct support for it when booting a
kernel without firmware loaded;

- ZSTD has a very high compression ratio (although not the highest), and
is almost as fast as GZIP at decompression time.

Reducing the number of options makes it less of a hassle for other
consumers of the EFI zboot format (such as QEMU today, and kexec in the
future) to support it transparently without having to carry 7 different
decompression libraries.

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

show more ...