Merge drm/drm-fixes into drm-misc-fixes

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support HW queue leasing, allowing co

Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP

- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible

- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints

- Remove the rtnl_lock use from IP Multicast Routing

- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two

- Report TCP delayed ack timer information via socket diag

- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space

- Add support for per-route tunsrc in IPv6 segment routing

- Start work of switching sockopt handling to iov_iter

- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up

- Support MSG_EOR in MPTCP

- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage

- Remove UDP-Lite support (as announced in 2023)

- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection

Cross-tree stuff:

- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it

Netfilter:

- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.

Florian W reports this gets us ~13% higher packet rate

- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex

- Add more opinionated input validation to lower security exposure

- Make IPVS hash tables to be per-netns and resizable

Wireless:

- Finished assoc frame encryption/EPPKE/802.1X-over-auth

- Radar detection improvements

- Add 6 GHz incumbent signal detection APIs

- Multi-link support for FILS, probe response templates and client
probing

- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware

Driver API:

- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs

- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)

- Add configuration API for completion writeback buffering (implement
in mana)

- Support driver-initiated change of RSS context sizes

- Support DPLL monitoring input frequency (implement in zl3073x)

- Support per-port resources in devlink (implement in mlx5)

Misc:

- Expand the YAML spec for Netfilter

Drivers

- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"

- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management

- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support

- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling

- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration

- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool

- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics

- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO

- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs

- Cellular:
- IPA v5.2 support"

* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...

show more ...

Merge branch 'dpll-zl3073x-refactor-state-management'

Ivan Vecera says:

====================
dpll: zl3073x: refactor state management

This series refactors the zl3073x DPLL driver to centralize ha

Merge branch 'dpll-zl3073x-refactor-state-management'

Ivan Vecera says:

====================
dpll: zl3073x: refactor state management

This series refactors the zl3073x DPLL driver to centralize hardware
state management behind dedicated per-module state interfaces, replacing
scattered direct register accesses in dpll.c with cached state and
proper accessor functions.

The driver already uses a fetch/get/set pattern for ref, out, and synth
modules. This series extends and refines that pattern:

First, struct_group() is applied to the existing ref, out, and synth
structures to partition fields into cfg (mutable configuration), inv
(invariants set at init), and stat (read-only status) groups. This
enables group-level memcmp for short-circuit checks and bulk copies in
state_set, and adds invariant validation guards.

A ref_state_update() helper is extracted to encapsulate the per-reference
monitor status register read, keeping direct register access behind the
ref module interface.

A new zl3073x_chan module is introduced following the same pattern,
caching the DPLL channel mode_refsel register with inline getters and
setters. The refsel_mode and forced_ref fields are removed from struct
zl3073x_dpll in favor of the cached channel state.

The chan module is then extended with cached mon_status and refsel_status
registers, converting lock_status_get and selected_ref_get from direct
HW reads to cached state lookups refreshed by the periodic worker.

Reference priority registers are cached in the chan cfg group, removing
the ad-hoc ref_prio_get/set functions and the redundant pin->selectable
flag, which is now derived from the cached priority. The
selected_ref_set function is inlined into input_pin_state_on_dpll_set,
unifying all mode paths through a single chan_state_set commit point.

Finally, selected_ref_get is dropped entirely since the refsel_status
register provides the selected reference regardless of mode, and
connected_ref_get is simplified to a direct refsel_state check.
====================

Link: https://patch.msgid.link/20260315174224.399074-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

dpll: zl3073x: add reference priority to zl3073x_chan

Cache the ZL_REG_DPLL_REF_PRIO registers in the zl3073x_chan cfg group.
These mailbox-based registers store per-reference priority values
(4 bit

dpll: zl3073x: add reference priority to zl3073x_chan

Cache the ZL_REG_DPLL_REF_PRIO registers in the zl3073x_chan cfg group.
These mailbox-based registers store per-reference priority values
(4 bits each, P/N packed) used for automatic reference selection.

Add ref_prio[] array to struct zl3073x_chan and provide inline helpers
zl3073x_chan_ref_prio_get(), zl3073x_chan_ref_prio_set(), and
zl3073x_chan_ref_is_selectable() for nibble-level access and priority
queries. Extend state_fetch and state_set with DPLL mailbox operations
to read and write the priority registers.

Replace the ad-hoc zl3073x_dpll_ref_prio_get/set functions in dpll.c
with the cached state pattern, removing direct mailbox access from
the DPLL layer. This also simplifies pin registration since reading
priority from cached state cannot fail.

Remove the pin->selectable flag from struct zl3073x_dpll_pin and
derive the selectable state from the cached ref priority via
zl3073x_chan_ref_is_selectable(), eliminating a redundant cache.

Inline zl3073x_dpll_selected_ref_set() into
zl3073x_dpll_input_pin_state_on_dpll_set(), unifying all manual and
automatic mode paths to commit changes through a single
zl3073x_chan_state_set() call at the end of the function.

Move hardware limit constants from core.h to regs.h so that chan.h
can reference ZL3073X_NUM_REFS for the ref_prio array size.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260315174224.399074-6-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

dpll: zl3073x: add DPLL channel status fields to zl3073x_chan

Add mon_status and refsel_status fields to struct zl3073x_chan in a
stat group to cache the 'dpll_mon_status' and 'dpll_refsel_status'
r

dpll: zl3073x: add DPLL channel status fields to zl3073x_chan

Add mon_status and refsel_status fields to struct zl3073x_chan in a
stat group to cache the 'dpll_mon_status' and 'dpll_refsel_status'
registers.

Add zl3073x_chan_lock_state_get(), zl3073x_chan_is_ho_ready(),
zl3073x_chan_refsel_state_get() and zl3073x_chan_refsel_ref_get()
inline helpers for reading cached state, and zl3073x_chan_state_update()
for refreshing both registers from hardware. Call it from
zl3073x_chan_state_fetch() as well so that channel status is
initialized at device startup.

Call zl3073x_dev_chan_states_update() from the periodic work to
keep the cached state up to date and convert
zl3073x_dpll_lock_status_get() and zl3073x_dpll_selected_ref_get()
to use the cached state via the new helpers instead of direct register
reads.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260315174224.399074-5-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

dpll: zl3073x: introduce zl3073x_chan for DPLL channel state

Extract DPLL channel state management into a dedicated zl3073x_chan
module, following the pattern already established by zl3073x_ref,
zl3

dpll: zl3073x: introduce zl3073x_chan for DPLL channel state

Extract DPLL channel state management into a dedicated zl3073x_chan
module, following the pattern already established by zl3073x_ref,
zl3073x_out and zl3073x_synth.

The new struct zl3073x_chan caches the raw mode_refsel register value
in a cfg group with inline getters and setters to extract and update
the bitfields. Three standard state management functions are provided:

- zl3073x_chan_state_fetch: read the mode_refsel register from HW
- zl3073x_chan_state_get: return cached channel state
- zl3073x_chan_state_set: write changed state to HW, skip if unchanged

The channel state array chan[ZL3073X_MAX_CHANNELS] is added to struct
zl3073x_dev. Channel state is fetched as part of
zl3073x_dev_state_fetch, using the chip-specific channel count.

The refsel_mode and forced_ref fields are removed from struct
zl3073x_dpll and all direct register accesses in dpll.c are replaced
with the new chan state operations.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260315174224.399074-4-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...