dpll: Add reference count tracking support

Add support for the REF_TRACKER infrastructure to the DPLL subsystem.

When enabled, this allows developers to track and debug reference counting
leaks or

dpll: Add reference count tracking support

Add support for the REF_TRACKER infrastructure to the DPLL subsystem.

When enabled, this allows developers to track and debug reference counting
leaks or imbalances for dpll_device and dpll_pin objects. It records stack
traces for every get/put operation and exposes this information via
debugfs at:
/sys/kernel/debug/ref_tracker/dpll_device_*
/sys/kernel/debug/ref_tracker/dpll_pin_*

The following API changes are made to support this:
1. dpll_device_get() / dpll_device_put() now accept a 'dpll_tracker *'
(which is a typedef to 'struct ref_tracker *' when enabled, or an empty
struct otherwise).
2. dpll_pin_get() / dpll_pin_put() and fwnode_dpll_pin_find() similarly
accept the tracker argument.
3. Internal registration structures now hold a tracker to associate the
reference held by the registration with the specific owner.

All existing in-tree drivers (ice, mlx5, ptp_ocp, zl3073x) are updated
to pass NULL for the new tracker argument, maintaining current behavior
while enabling future debugging capabilities.

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-8-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

dpll: Add basic Microchip ZL3073x support

Microchip Azurite ZL3073x represents chip family providing DPLL
and optionally PHC (PTP) functionality. The chips can be connected
be connected over I2C or

dpll: Add basic Microchip ZL3073x support

Microchip Azurite ZL3073x represents chip family providing DPLL
and optionally PHC (PTP) functionality. The chips can be connected
be connected over I2C or SPI bus.

They have the following characteristics:
* up to 5 separate DPLL units (channels)
* 5 synthesizers
* 10 input pins (references)
* 10 outputs
* 20 output pins (output pin pair shares one output)
* Each reference and output can operate in either differential or
single-ended mode (differential mode uses 2 pins)
* Each output is connected to one of the synthesizers
* Each synthesizer is driven by one of the DPLL unit

The device uses 7-bit addresses and 8-bits values. It exposes 8-, 16-,
32- and 48-bits registers in address range <0x000,0x77F>. Due to 7bit
addressing, the range is organized into pages of 128 bytes, with each
page containing a page selector register at address 0x7F.
For reading/writing multi-byte registers, the device supports bulk
transfers.

Add basic functionality to access device registers, probe functionality
both I2C and SPI cases and add devlink support to provide info and
to set clock ID parameter.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250704182202.1641943-6-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

dpll: indent DPLL option type by a tab

Indent config option type by a tab. It helps Kconfig parsers
to read file without error.

Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions")

dpll: indent DPLL option type by a tab

Indent config option type by a tab. It helps Kconfig parsers
to read file without error.

Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions")
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240322114819.1801795-1-ppandit@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

dpll: core: Add DPLL framework base functions

DPLL framework is used to represent and configure DPLL devices
in systems. Each device that has DPLL and can configure inputs
and outputs can use this f

dpll: core: Add DPLL framework base functions

DPLL framework is used to represent and configure DPLL devices
in systems. Each device that has DPLL and can configure inputs
and outputs can use this framework.

Implement core framework functions for further interactions
with device drivers implementing dpll subsystem, as well as for
interactions of DPLL netlink framework part with the subsystem
itself.

Co-developed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...