Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

Pull dmaengine updates from Vinod Koul:
"New support:

- New dmaengine_prep_peripheral_dma_vec() t

Merge tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

Pull dmaengine updates from Vinod Koul:
"New support:

- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma

- STMicro STM32 DMA3 support and new capabilities of cyclic dma

Updates:

- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding

- Altera msgdma updates for descriptor management"

* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...

show more ...

dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM

Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement
that both source and destination addresses

dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM

Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement
that both source and destination addresses need pass through the IOMMU.
Typically, peripheral FIFO addresses bypass the IOMMU, necessitating
only one of the source or destination to go through it.

Set "is_remote" to true to ensure both source and destination
addresses pass through the IOMMU.

iMX8 Spec define "Local" and "Remote" bus as below.
Local bus: bypass IOMMU to directly access other peripheral register,
such as FIFO.
Remote bus: go through IOMMU to access system memory.

The test fail log as follow:
[ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0)
[ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0)

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240510030959.703663-1-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan

The 'idle' in fsl_chan is redundant as it's equivalent to
'status != DMA_IN_PROGRESS'. So remote it to simple code logic.

Signed-off

dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan

The 'idle' in fsl_chan is redundant as it's equivalent to
'status != DMA_IN_PROGRESS'. So remote it to simple code logic.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240603152317.69917-2-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated

The edma feature individual IRQs for each DMA channel at some devices.
Given the presence of numerous eDMA instances, each

dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated

The edma feature individual IRQs for each DMA channel at some devices.
Given the presence of numerous eDMA instances, each with multiple channels,
IRQ request during probe results in an extensive list at /proc/interrupts.
However, a significant portion of these channels remains unused by the
system.

Request irq only when a DMA client driver requests a DMA channel.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240603152317.69917-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'for-6.11/trivial' into for-linus

Couple of trivial fixes:
- extra semicolon (Chen Ni)
- typo (Thorsten Blum)

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

Pull dmaengine updates from Vinod Koul:
"New HW support:
- Freescale i.MX8ULP edma support in edma

Merge tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

Pull dmaengine updates from Vinod Koul:
"New HW support:
- Freescale i.MX8ULP edma support in edma driver
- StarFive JH8100 DMA support in Synopsis axi-dmac driver

Updates:
- Tracing support for freescale edma driver, updates to dpaa2 driver
- Remove unused QCom hidma DT support
- Support for i2c dma in imx-sdma
- Maintainers update for idxd and edma drivers"

* tag 'dmaengine-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
MAINTAINERS: Update role for IDXD driver
dmaengine: fsl-edma: use _Generic to handle difference type
dmaengine: fsl-edma: add trace event support
dmaengine: idxd: Avoid unnecessary destruction of file_ida
dmaengine: xilinx: xdma: fix module autoloading
dt-bindings: dma: fsl-edma: allow 'power-domains' property
dt-bindings: dma: fsl-edma: remove 'clocks' from required
dmaengine: fsl-dpaa2-qdma: Fix kernel-doc check warning
dmaengine: imx-sdma: Add i2c dma support
dmaengine: imx-sdma: utilize compiler to calculate ADDRS_ARRAY_SIZE_V<n>
dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID
dt-bindings: fsl-dma: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
dt-bindings: dma: Drop unused QCom hidma binding
dmaengine: qcom: Drop hidma DT support
dmaengine: pl08x: Use kcalloc() instead of kzalloc()
dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3
dmaengine: fsl-edma: fix miss mutex unlock at an error return path
dmaengine: pch_dma: remove unused function chan2parent
dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open
...

show more ...

dmaengine: fsl-edma: use _Generic to handle difference type

Introduce the use of C11 standard _Generic in the fsl-edma driver for
handling different TCD field types. Improve code clarity and help
co

dmaengine: fsl-edma: use _Generic to handle difference type

Introduce the use of C11 standard _Generic in the fsl-edma driver for
handling different TCD field types. Improve code clarity and help
compiler optimization.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240425205947.3436501-2-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: fsl-edma: add trace event support

Implement trace event support to enhance logging functionality for
register access and the transfer control descriptor (TCD) context.
This will enable mo

dmaengine: fsl-edma: add trace event support

Implement trace event support to enhance logging functionality for
register access and the transfer control descriptor (TCD) context.
This will enable more comprehensive monitoring and analysis of system
activities

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240425205947.3436501-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...

dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string

The eDMA hardware issue only exist imx8QM A0. A0 never mass production.
So remove the workaround safely.

Signed-off-by: Joy

dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string

The eDMA hardware issue only exist imx8QM A0. A0 never mass production.
So remove the workaround safely.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240424064508.1886764-2-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

show more ...