Merge tag 's390-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add a cpuidle driver with polling and enabled wait states using the
ex

Merge tag 's390-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

- Add a cpuidle driver with polling and enabled wait states using the
existing CPU idle infrastructure and idle governor to improve latency
for frequent sleep/wakeup cycles. Remove the obsolete tick delay
heuristic and generic arch_needs_cpu() hook. Add the corresponding
driver entry to MAINTAINERS

- Add kCFI support using the generic support provided by Clang

- Enable Clang CONTEXT_ANALYSIS for various architecture code and for
char, PCI, CIO and virtio drivers. Add required lock annotations,
exclude unsupported mm helpers and remove conditional PCI locking

- Fix secure storage access exception handling and reintroduce
DCACHE_WORD_ACCESS previously removed as a workaround

- Fix cpum_cf perf crashes when CPUs are brought online while per-task
events are active. Allocate and remove per-CPU counter data from CPU
hotplug callbacks

- Fix a deadlock when an s390dbf debug area is unregistered while one
of its debugfs files is being written to

- Fix MVIY_PERCPU() with binutils older than 2.39, where an assembler
macro silently omitted an instruction needed to repair interrupted
operations after CPU migration

- Remove/replace cond_resched() calls which are no-ops with the
supported s390 preemption models

- Fix AP queue depth and maximum message length decoding according to
the architecture. Current hardware is not affected, but future
hardware could report values which were handled incorrectly

- Reflect the configured CPU state in cpu_enabled_mask so deconfigured
CPUs are not presented as available for onlining

- Restore the vDSO GNU_EH_FRAME program header which was lost when the
build switched to direct linker invocation, and mark it read-only

- Add SCLP action qualifiers used by Spyre for card initialization,
recoverable error and telemetry reporting

- Move KMSAN interrupt flag helpers out of line to fix
-Wstatic-in-inline build warnings

- Use level-specific page table entry accessors for hugetlb entries and
ptep_get() when accessing crashed kernel memory in kdump

- Make forced AP bus rescans killable so that a user process blocked
behind an ongoing scan can still be terminated with SIGKILL

- Rework pkey ioctl error paths to remove duplicated cleanup code and
avoid freeing error pointers

- Allow the protected guest SWIOTLB buffer to be allocated outside the
first 2GB. Also enable dynamic SWIOTLB growth and the coherent atomic
pool fallback to improve I/O behavior when the initial pool is
exhausted

- Add program check statistics and spinlock contention tracepoints.
Increase the lockdep chain capacity to keep lockdep enabled for
complex code paths such as btrfs

- Simplify IPL, trap and syscall code and remove the obsolete
unistd_32.h generation entry

* tag 's390-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (59 commits)
s390/percpu: Fix MVIY_PERCPU() with older binutils
s390/debug: Fix deadlock during unregister
s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks
s390: Enable CONTEXT_ANALYSIS for various directories
s390/mm: Add __context_unsafe() attribute to gmap helper functions
s390/mm: Add __context_unsafe() attribute to do_secure_storage_access()
s390/sysinfo: Add context analysis attributes
s390/irqflags: Add out-of-line definitions of arch_local_irq_*() for KMSAN
s390/virtio: Enable CONTEXT_ANALYSIS
s390/cio: Enable CONTEXT_ANALYSIS
s390/vfio_ccw: Add __must_hold() attribute to vfio_ccw_sch_quiesce()
s390/pci: Enable CONTEXT_ANALYSIS
s390/pci: Rework __zpci_event_availability() to remove conditional locking
s390/pci: Rework __zpci_event_error() to remove conditional locking
s390/char: Enable CONTEXT_ANALYSIS
s390/con3215: Add __must_hold() attribute to raw3215_make_room()
s390/ap: Fix MAPML computation
s390/cio: Remove cond_resched() calls
s390: Remove cond_resched() calls
KVM: s390: Remove cond_resched() calls
...

show more ...

s390/idle: Introduce cpuidle for s390

Introduce generic cpuidle driver on s390. Use a two stage approach to
handle idle scenarios and use idle governor for idle stage selection.
Two stages are, from

s390/idle: Introduce cpuidle for s390

Introduce generic cpuidle driver on s390. Use a two stage approach to
handle idle scenarios and use idle governor for idle stage selection.
Two stages are, from shallow to deep, idle polling and enabled wait.

Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04

Merge drm/drm-next into drm-intel-gt-next

Need to pull in a67221b5eb8d ("drm/i915/dp: Return min bpc supported by source instead of 0")
in order to fix build breakage on GCC 9.4.0 (from Ubuntu 20.04).

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to sync with v6.15-rc, xe, and specifically async flip changes
in drm-misc.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.16 merge window.

Merge tag 'v6.15-rc6' into next

Sync up with mainline to bring in xpad controller changes.

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signe

Merge remote-tracking branch 'drm-misc/drm-misc-next' into msm-next

Merge drm-misc-next to get commit Fixes: fec450ca15af ("drm/display:
hdmi: provide central data authority for ACR params").

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerge to bring in linux 6.15-rc.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.

Signed-off-by: Thomas Zimmermann <tzimmerm

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge Merge tag 'objtool-core-2025-03-22' into loongarch-next

LoongArch architecture changes for 6.15 depend on the objtool-core
changes to work well for UNWINDER_ORC, so merge them to create a base.

Merge branch 'linus' into x86/urgent, to pick up fixes and refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'objtool-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molnar:

- The biggest change is the new option to automatically fail the

Merge tag 'objtool-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molnar:

- The biggest change is the new option to automatically fail the build
on objtool warnings: CONFIG_OBJTOOL_WERROR.

While there are no currently known unfixed false positives left, such
an expansion in the severity of objtool warnings inevitably creates a
risk of build failures, so it's disabled by default and depends on
!COMPILE_TEST, so it shouldn't be enabled on
allyesconfig/allmodconfig builds and won't be forced on people who
just accept build-time defaults in 'make oldconfig'.

While the option is strongly recommended, only people who enable it
explicitly should see it.

(Josh Poimboeuf)

- Disable branch profiling in noinstr code with a broad brush that
includes all of arch/x86/ and kernel/sched/. (Josh Poimboeuf)

- Create backup object files on objtool errors and print exact objtool
arguments to make failure analysis easier (Josh Poimboeuf)

- Improve noreturn handling (Josh Poimboeuf)

- Improve rodata handling (Tiezhu Yang)

- Support jump tables, switch tables and goto tables on LoongArch
(Tiezhu Yang)

- Misc cleanups and fixes (Josh Poimboeuf, David Engraf, Ingo Molnar)

* tag 'objtool-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
tracing: Disable branch profiling in noinstr code
objtool: Use O_CREAT with explicit mode mask
objtool: Add CONFIG_OBJTOOL_WERROR
objtool: Create backup on error and print args
objtool: Change "warning:" to "error:" for --Werror
objtool: Add --Werror option
objtool: Add --output option
objtool: Upgrade "Linked object detected" warning to error
objtool: Consolidate option validation
objtool: Remove --unret dependency on --rethunk
objtool: Increase per-function WARN_FUNC() rate limit
objtool: Update documentation
objtool: Improve __noreturn annotation warning
objtool: Fix error handling inconsistencies in check()
x86/traps: Make exc_double_fault() consistently noreturn
LoongArch: Enable jump table for objtool
objtool/LoongArch: Add support for goto table
objtool/LoongArch: Add support for switch table
objtool: Handle PC relative relocation type
objtool: Handle different entry size of rodata
...

show more ...

tracing: Disable branch profiling in noinstr code

CONFIG_TRACE_BRANCH_PROFILING inserts a call to ftrace_likely_update()
for each use of likely() or unlikely(). That breaks noinstr rules if
the aff

tracing: Disable branch profiling in noinstr code

CONFIG_TRACE_BRANCH_PROFILING inserts a call to ftrace_likely_update()
for each use of likely() or unlikely(). That breaks noinstr rules if
the affected function is annotated as noinstr.

Disable branch profiling for files with noinstr functions. In addition
to some individual files, this also includes the entire arch/x86
subtree, as well as the kernel/entry, drivers/cpuidle, and drivers/idle
directories, all of which are noinstr-heavy.

Due to the nature of how sched binaries are built by combining multiple
.c files into one, branch profiling is disabled more broadly across the
sched code than would otherwise be needed.

This fixes many warnings like the following:

vmlinux.o: warning: objtool: do_syscall_64+0x40: call to ftrace_likely_update() leaves .noinstr.text section
vmlinux.o: warning: objtool: __rdgsbase_inactive+0x33: call to ftrace_likely_update() leaves .noinstr.text section
vmlinux.o: warning: objtool: handle_bug.isra.0+0x198: call to ftrace_likely_update() leaves .noinstr.text section
...

Reported-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/fb94fc9303d48a5ed370498f54500cc4c338eb6d.1742586676.git.jpoimboe@kernel.org

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.18' into next

Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus one new
device ID for an x86 laptop. Nothing that really stands out with
particularly big impact outside of the affected device.

show more ...

Merge branch 'topic/cs35l41' into for-next

Pull CS35L41 codec updates

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Pull in TTM changes needed for DG2 CCS enabling from Ram.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the 5.18 fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>