Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"By the number of new lines of code, the most visible cha

Merge tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"By the number of new lines of code, the most visible change here is
the addition of hybrid CPU capacity scaling support to the
intel_pstate driver. Next are the amd-pstate driver changes related to
the calculation of the AMD boost numerator and preferred core
detection.

As far as new hardware support is concerned, the intel_idle driver
will now handle Granite Rapids Xeon processors natively, the
intel_rapl power capping driver will recognize family 1Ah of AMD
processors and Intel ArrowLake-U chipos, and intel_pstate will handle
Granite Rapids and Sierra Forest chips in the out-of-band (OOB) mode.

Apart from the above, there is a usual collection of assorted fixes
and code cleanups in many places and there are tooling updates.

Specifics:

- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef)

- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada)

- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki)

- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson)

- Several OF related cleanups in cpufreq drivers (Rob Herring)

- Enable COMPILE_TEST for ARM drivers (Rob Herrring)

- Introduce quirks for syscon failures and use socinfo to get
revision for TI cpufreq driver (Dhruva Gole, Nishanth Menon)

- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar)

- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing)

- Make amd-pstate validate return of any attempt to update EPP
limits, which fixes the masking hardware problems (Mario
Limonciello)

- Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
(Mario Limonciello)

- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello)

- Add extra unit test coverage for mode state machine (Mario
Limonciello)

- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang
Liu)

- Add Granite Rapids Xeon support to intel_idle (Artem Bityutskiy)

- Disable promotion to C1E on Jasper Lake and Elkhart Lake in
intel_idle (Kai-Heng Feng)

- Use scoped device node handling to fix missing of_node_put() and
simplify walking OF children in the riscv-sbi cpuidle driver
(Krzysztof Kozlowski)

- Remove dead code from cpuidle_enter_state() (Dhruva Gole)

- Change an error pointer to NULL to fix error handling in the
intel_rapl power capping driver (Dan Carpenter)

- Fix off by one in get_rpi() in the intel_rapl power capping driver
(Dan Carpenter)

- Add support for ArrowLake-U to the intel_rapl power capping driver
(Sumeet Pawnikar)

- Fix the energy-pkg event for AMD CPUs in the intel_rapl power
capping driver (Dhananjay Ugwekar)

- Add support for AMD family 1Ah processors to the intel_rapl power
capping driver (Dhananjay Ugwekar)

- Remove unused stub for saveable_highmem_page() and remove
deprecated macros from power management documentation (Andy
Shevchenko)

- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo)

- Update the maintainers information for the
operating-points-v2-ti-cpu DT binding (Dhruva Gole)

- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring)

- Add missing MODULE_DESCRIPTION() macros to devfreq governors (Jeff
Johnson)

- Use devm_clk_get_enabled() in the exynos-bus devfreq driver (Anand
Moon)

- Use of_property_present() instead of of_get_property() in the
imx-bus devfreq driver (Rob Herring)

- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin)

- Make cpupower display residency value in idle-info (Aboorva
Devarajan)

- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV)

- Add SWIG support to cpupower (John B. Wyatt IV)"

* tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
PM: hibernate: Remove unused stub for saveable_highmem_page()
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
...

show more ...

Merge branch 'pm-cpufreq'

Merge cpufreq updates for 6.12-rc1:

- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef).

- Add support for Granite Rapids and Sierra Forest in OOB mode to the
int

Merge branch 'pm-cpufreq'

Merge cpufreq updates for 6.12-rc1:

- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef).

- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada).

- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki).

- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson).

- Several OF related cleanups in cpufreq drivers (Rob Herring).

- Enable COMPILE_TEST for ARM drivers (Rob Herrring).

- Introduce quirks for syscon failures and use socinfo to get revision
for TI cpufreq driver (Dhruva Gole, Nishanth Menon).

- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar).

- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing).

- Make amd-pstate validate return of any attempt to update EPP limits,
which fixes the masking hardware problems (Mario Limonciello).

- Move the calculation of the AMD boost numerator outside of amd-pstate,
correcting acpi-cpufreq on systems with preferred cores (Mario
Limonciello).

- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello).

- Add extra unit test coverage for mode state machine (Mario
Limonciello).

- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang Liu).

* pm-cpufreq: (35 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit()
cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family
cpufreq: Fix the cacography in powernv-cpufreq.c
cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately
cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value
...

show more ...

Merge tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux

Merge the second round of amd-pstate changes for 6.12 from Mario
Limonciello:

"* Move the

Merge tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux

Merge the second round of amd-pstate changes for 6.12 from Mario
Limonciello:

"* Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
* Harden preferred core detection to avoid potential false positives
* Add extra unit test coverage for mode state machine"

* tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c

show more ...

x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()

The function name is ambiguous because it returns an intermediate value
for calculating maximum frequency rather than the CP

x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()

The function name is ambiguous because it returns an intermediate value
for calculating maximum frequency rather than the CPPC 'Highest Perf'
register.

Rename the function to clarify its use and allow the function to return
errors. Adjust the consumer in acpi-cpufreq to catch errors.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

net/sched/act_ct.c
26488172b029 ("net/sched: Fix UAF when resolving a

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

Conflicts:

net/sched/act_ct.c
26488172b029 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b76 ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")

No adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add suppo

Merge tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add support for new
features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
mode for Emerald Rapids, highest performance change interrupt),
amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
drivers, simplify the cpufreq driver interface, simplify the teo
cpuidle governor, adjust the pm-graph utility for a new version of
Python, address issues and clean up code.

Specifics:

- Add Loongson-3 CPUFreq driver support (Huacai Chen)

- Add support for the Arrow Lake and Lunar Lake platforms and the
out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada)

- Switch cpufreq to new Intel CPU model defines (Tony Luck)

- Simplify the cpufreq driver interface by switching the .exit()
driver callback to the void return data type (Lizhe, Viresh Kumar)

- Make cpufreq_boost_enabled() return bool (Dhruva Gole)

- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)

- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin)

- Fix memory leaks and of_node_put() usage in the sun50i and
qcom-nvmem cpufreq drivers (Javier Carrasco)

- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou)

- Fix deferred probe handling in the TI cpufreq driver and wrong
return values of ti_opp_supply_probe(), and add OPP tables for the
AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)

- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona)

- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado)

- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li)

- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)

- Improve the teo cpuidle governor and clean up leftover comments
from the menu cpuidle governor (Christian Loehle)

- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant)

- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson)

- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck)

- Switch the Intel RAPL driver new Intel CPU model defines (Tony
Luck)

- Simplify if condition in the idle_inject driver (Thorsten Blum)

- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)

- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)

- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt)

- Address several assorted issues in the cpupower utility (Roman
Storozhenko)"

* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpupower: fix lib default installation path
cpufreq: docs: Add missing scaling_available_frequencies description
cpuidle: teo: Don't count non-existent intercepts
cpupower: Disable direct build of the 'bench' subproject
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
...

show more ...

Merge branch 'pm-cpufreq'

Merge cpufreq changes for 6.11-rc1:

- Add Loongson-3 CPUFreq driver support (Huacai Chen).

- Add support for the Arrow Lake and Lunar Lake platforms and
the out-of-b

Merge branch 'pm-cpufreq'

Merge cpufreq changes for 6.11-rc1:

- Add Loongson-3 CPUFreq driver support (Huacai Chen).

- Add support for the Arrow Lake and Lunar Lake platforms and
the out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada).

- Switch cpufreq to new Intel CPU model defines (Tony Luck).

- Simplify the cpufreq driver interface by switching the .exit() driver
callback to the void return data type (Lizhe, Viresh Kumar).

- Make cpufreq_boost_enabled() return bool (Dhruva Gole).

- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du).

- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin).

- Fix memory leaks and of_node_put() usage in the sun50i and qcom-nvmem
cpufreq drivers (Javier Carrasco).

- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou).

- Fix deferred probe handling in the TI cpufreq driver and wrong return
values of ti_opp_supply_probe(), and add OPP tables for the AM62Ax and
AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser).

- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona).

- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado).

- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li).

- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu).

* pm-cpufreq: (55 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpufreq: docs: Add missing scaling_available_frequencies description
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
cpufreq: amd-pstate: initialize core precision boost state
cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
cpufreq: sti: add missing MODULE_DEVICE_TABLE entry for stih418
cpufreq: intel_pstate: Replace boot_cpu_has()
cpufreq: ti: update OPP table for AM62Px SoCs
...

show more ...

Merge back final cpufreq fixes for 6.10.

Merge back cpufreq material for 6.11.

Merge tag 'cpufreq-arm-updates-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Merge ARM cpufreq updates for 6.11 from Viresh Kumar:

"- cpufreq: Add Loongson-3 CPUFreq driver

Merge tag 'cpufreq-arm-updates-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Merge ARM cpufreq updates for 6.11 from Viresh Kumar:

"- cpufreq: Add Loongson-3 CPUFreq driver support (Huacai Chen).
- Make exit() callback return void (Lizhe and Viresh Kumar).
- Minor cleanups and fixes in several drivers (Bryan Brattlof,
Javier Carrasco, Jagadeesh Kona, Jeff Johnson, Nícolas F. R. A. Prado,
Primoz Fiser, Raphael Gallais-Pou, and Riwen Lu)."

* tag 'cpufreq-arm-updates-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (21 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpufreq: sti: add missing MODULE_DEVICE_TABLE entry for stih418
cpufreq: ti: update OPP table for AM62Px SoCs
cpufreq: ti: update OPP table for AM62Ax SoCs
cpufreq: sun50i: add Allwinner H700 speed bin
cpufreq/cppc: Don't compare desired_perf in target()
OPP: ti: Fix ti_opp_supply_probe wrong return values
cpufreq: ti-cpufreq: Handle deferred probe with dev_err_probe()
cpufreq: dt-platdev: add missing MODULE_DESCRIPTION() macro
cpufreq: longhaul: Fix kernel-doc param for longhaul_setstate
cpufreq: qcom-nvmem: eliminate uses of of_node_put()
cpufreq: qcom-nvmem: fix memory leaks in probe error paths
cpufreq: scmi: Avoid overflow of target_freq in fast switch
cpufreq: sun50i: replace of_node_put() with automatic cleanup handler
...

show more ...

cpufreq: Make cpufreq_driver->exit() return void

The cpufreq core doesn't check the return type of the exit() callback
and there is not much the core can do on failures at that point. Just
drop the

cpufreq: Make cpufreq_driver->exit() return void

The cpufreq core doesn't check the return type of the exit() callback
and there is not much the core can do on failures at that point. Just
drop the returned value and make it return void.

Signed-off-by: Lizhe <sensor1010@163.com>
[ Viresh: Reworked the patches to fix all missing changes together. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # Mediatek
Acked-by: Sudeep Holla <sudeep.holla@arm.com> # scpi, scmi, vexpress
Acked-by: Mario Limonciello <mario.limonciello@amd.com> # amd
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # bmips
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com> # omap

show more ...

Merge tag 'amd-pstate-v6.11-2024-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux

Merge more amd-pstate driver updates for 6.11 from Mario Limonciello:

"Add support for am

Merge tag 'amd-pstate-v6.11-2024-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux

Merge more amd-pstate driver updates for 6.11 from Mario Limonciello:

"Add support for amd-pstate core performance boost support which
allows controlling which CPU cores can operate above nominal
frequencies for short periods of time."

* tag 'amd-pstate-v6.11-2024-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
cpufreq: amd-pstate: initialize core precision boost state
cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h

show more ...

cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h

There are some other drivers also need to use the
MSR_K7_HWCR_CPB_DIS_BIT for CPB control bit, so it makes sense to move
the definition t

cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h

There are some other drivers also need to use the
MSR_K7_HWCR_CPB_DIS_BIT for CPB control bit, so it makes sense to move
the definition to a common header file to allow other driver to use it.

No intentional functional impact.

Suggested-by: Gautham Ranjal Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Huang Rui <ray.huang@amd.com>
Link: https://lore.kernel.org/r/78b6c75e6cffddce3e950dd543af6ae9f8eeccc3.1718988436.git.perry.yuan@amd.com
Link: https://lore.kernel.org/r/20240626042733.3747-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>

show more ...

Merge tag 'pm-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"Fix two issues related to boost frequencies handling, one

Merge tag 'pm-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"Fix two issues related to boost frequencies handling, one in the
cpufreq core and one in the ACPI cpufreq driver (Mario Limonciello)"

* tag 'pm-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Mark boost policy as enabled when setting boost
cpufreq: Allow drivers to advertise boost enabled

show more ...

cpufreq: ACPI: Mark boost policy as enabled when setting boost

When boost is set for CPUs using acpi-cpufreq, the policy is not
updated which can cause boost to be incorrectly not reported.

Fixes:

cpufreq: ACPI: Mark boost policy as enabled when setting boost

When boost is set for CPUs using acpi-cpufreq, the policy is not
updated which can cause boost to be incorrectly not reported.

Fixes: 218a06a79d9a ("cpufreq: Support per-policy performance boost")
Link: https://patch.msgid.link/20240626204723.6237-2-mario.limonciello@amd.com
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>