Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though

Merge tag 'asoc-fix-v6.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.19

We've been quite busy with fixes since the merge window, though not in
any particularly exciting ways - the standout thing is the fix for _SX
controls which were broken by a change to how we do clamping, otherwise
it's all fairly run of the mill fixes and quirks.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: M

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are f

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are followup fixes to be applied.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'timers-clocksource-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull clocksource updates from Thomas Gleixner:
"Updates for clocksource and clockevent drivers:

Merge tag 'timers-clocksource-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull clocksource updates from Thomas Gleixner:
"Updates for clocksource and clockevent drivers:

- A new driver for the Realtel system timer

- Prevent the unbinding of timers when the drivers do not support
that

- Expand the timer counter readout for the SPRD driver to 64 bit
to allow IOT devices suspend times of more than 36 hours, which
is the current limit of the 32-bi readout

- The usual small cleanups, fixes and enhancements all over the
place"

* tag 'timers-clocksource-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers: Add Realtek system timer driver
dt-bindings: timer: Add Realtek SYSTIMER
clocksource/drivers/stm32-lp: Drop unused module alias
clocksource/drivers/rda: Add sched_clock_register for RDA8810PL SoC
clocksource/drivers/nxp-stm: Prevent driver unbind
clocksource/drivers/nxp-pit: Prevent driver unbind
clocksource/drivers/arm_arch_timer_mmio: Prevent driver unbind
clocksource/drivers/nxp-stm: Fix section mismatches
clocksource/drivers/sh_cmt: Always leave device running after probe
clocksource/drivers/stm: Fix double deregistration on probe failure
clocksource/drivers/ralink: Fix resource leaks in init error path
clocksource/drivers/timer-sp804: Fix read_current_timer() issue when clock source is not registered
clocksource/drivers/sprd: Enable register for timer counter from 32 bit to 64 bit

show more ...

Merge tag 'timers-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

Pull clocksource/event changes from Daniel Lezcano:

- Use 64-bits for

Merge tag 'timers-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

Pull clocksource/event changes from Daniel Lezcano:

- Use 64-bits for timer compensation for IoT usage where the suspend
time is much longer than what 32-bits can provide (Enlin Mu)

- Add delay support on sp804 for ARM32 platforms (Stephen Eta Zhou)

- Fix missing resource release on error in the probe path of in the
ralink driver (Haotian Zhang)

- Fix double deregistration on probe failure in the NXP STM driver
(Johan Hovold)

- Disable runtime PM for the Renesas SH CMT timer because it is
incompatible with PREEMPT_RT=y (Niklas Söderlund)

- Fix section mismatches in the NXP STM driver (Johan Hovold)

- Preventing unbinding the NXP PIT, STM and MMIO ARM Arch timers as
the code does not suppport bind/unbind (Johan Hovold)

- Use the clocksource instead of ticks on the RDA8810PL platform
(Enlin Mu)

- Drop the unused module alias for the STM32-LP (Johan Hovold)

- Add Realtek system timer driver (Hao-Wen Ting)

Link: https://lore.kernel.org/all/9303b790-28d4-4bd9-b01d-28fb05493596@linaro.org

show more ...

clocksource/drivers: Add Realtek system timer driver

Add a system timer driver for Realtek SoCs.

This driver registers the 1 MHz global hardware counter on Realtek
platforms as a clock event device

clocksource/drivers: Add Realtek system timer driver

Add a system timer driver for Realtek SoCs.

This driver registers the 1 MHz global hardware counter on Realtek
platforms as a clock event device. Since this hardware counter starts
counting automatically after SoC power-on, no clock initialization is
required. Because the counter does not stop or get affected by CPU power
down, and it supports oneshot mode, it is typically used as a tick
broadcast timer.

Signed-off-by: Hao-Wen Ting <haowen.ting@realtek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251126060110.198330-3-haowen.ting@realtek.com

show more ...

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc6' into for-linus

Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.

spi: Merge up v6.18-rc1

Ensure my CI has a sensible baseline.

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a f

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull clocksource updates from Thomas Gleixner:

- Further preparations for modular clocksource/eve

Merge tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull clocksource updates from Thomas Gleixner:

- Further preparations for modular clocksource/event drivers

- The usual device tree updates to support new chip variants and the
related changes to thise drivers

- Avoid a 64-bit division in the TEGRA186 driver, which caused a build
fail on 32-bit machines.

- Small fixes, improvements and cleanups all over the place

* tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
dt-bindings: timer: exynos4210-mct: Add compatible for ARTPEC-9 SoC
clocksource/drivers/sh_cmt: Split start/stop of clock source and events
clocksource/drivers/clps711x: Fix resource leaks in error paths
clocksource/drivers/arm_global_timer: Add auto-detection for initial prescaler values
clocksource/drivers/ingenic-sysost: Convert from round_rate() to determine_rate()
clocksource/drivers/timer-tegra186: Don't print superfluous errors
clocksource/drivers/timer-rtl-otto: Simplify documentation
clocksource/drivers/timer-rtl-otto: Do not interfere with interrupts
clocksource/drivers/timer-rtl-otto: Drop set_counter function
clocksource/drivers/timer-rtl-otto: Work around dying timers
clocksource/drivers/timer-ti-dm : Capture functionality for OMAP DM timer
clocksource/drivers/arm_arch_timer_mmio: Add MMIO clocksource
clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver
clocksource/drivers/arm_arch_timer: Add standalone MMIO driver
ACPI: GTDT: Generate platform devices for MMIO timers
clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support
dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3
clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT
clocksource/drivers/vf-pit: Unify the function name for irq ack
clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable
...

show more ...

Merge tag 'timers-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

Pull clocksource/events driver updates from Daniel Lezcano:

- Add the m

Merge tag 'timers-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

Pull clocksource/events driver updates from Daniel Lezcano:

- Add the module owner to all the drivers which can be converted into
modules in order to have the core time framework to take the
refcount and prevent wild module removal. In addition export the
symbols for the sched_clock_register() function to allow the drivers
to be converted into modules (Daniel Lezcano)

- Convert the faraday,fttmr010 DT bindings to yaml schema (Rob
Herring)

- Add the DT bindings compatible string for the MT6572 (Max
Shevchenko)

- Fix the fsl,ftm-timer bindings by using the items to describe a
register (Frank Li)

- Add the DT binding documentation for Andes machine timer (Ben
Zong-You Xie)

- Avoid 64-bit divide operation which fails on xtensa and simplify the
timeleft computation with 32 bits operations on Tegra186 (Guenter
Roeck)

- Add the fsl,timrot.yaml DT bindings for i.MX23/i.MX28 timer (Frank
Li)

- Replace comma by semicolon which were introduced when moving the
static structure initialization (Chen Ni)

- Add a new compatible for the MediaTek MT8196 SoC, fully compatible
with MT6765 (AngeloGioacchino Del Regno)

- Add the support for the s32g2 and s32g3 platforms in the PIT timer
after cleaning up the code to support multiple instances (Daniel
Lezcano)

- Generate platform devices for MMIO timers with ACPI and integrate it
with the arch ARM timer (Marc Zyngier)

- Fix RTL OTTO timer by working around dying timers (Markus Stockhausen)

- Remove extra error message in the tegra186 timer (Wolfram Sang)

- Convert from round_rate() to determine_rate() in the Ingenic sysost
driver (Brian Masney)

- Add PWM capture functionality in the OMAP DM driver (Gokul Praveen)

- Autodetect the clock rate to initialize a prescaler value compatible
with the frequency changes on the ARM global timer (Markus
Schneider-Pargmann)

- Fix rollbacks missing resource deallocation in case of error on the
clps711x (Zhen Ni)

- Reorganize the code to split the start and the stop routine on the
sh_cmt driver (Niklas Söderlund)

- Add the compatible definition for ARTPEC-9 on exynos MCT (SungMin Park)

show more ...

clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver

Remove all the MMIO support from the per-CPU timer driver, and switch
over to the standalove driver.

Signed-off-by: Marc Zy

clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver

Remove all the MMIO support from the per-CPU timer driver, and switch
over to the standalove driver.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250814154622.10193-4-maz@kernel.org

show more ...

clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT

The PIT acronym stands for Periodic Interrupt Timer which is found on
different NXP platforms not only on the Vybrid Family. Change the name

clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT

The PIT acronym stands for Periodic Interrupt Timer which is found on
different NXP platforms not only on the Vybrid Family. Change the name
to be more generic for the NXP platforms in general. That will be
consistent with the NXP STM driver naming convention.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250804152344.1109310-19-daniel.lezcano@linaro.org

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.16-rc1, among other things to get the fixed size GENMASK_U*()
and BIT_U*() macros.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>