Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.6-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.6-rc2' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.6-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there a

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.

If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.

New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK

Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver

Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...

show more ...

Merge branches 'clk-bindings', 'clk-starfive', 'clk-rm', 'clk-renesas' and 'clk-cleanup' into clk-next

- Remove OXNAS clk driver

* clk-bindings:
dt-bindings: clock: versal: Convert the xlnx,zynq

Merge branches 'clk-bindings', 'clk-starfive', 'clk-rm', 'clk-renesas' and 'clk-cleanup' into clk-next

- Remove OXNAS clk driver

* clk-bindings:
dt-bindings: clock: versal: Convert the xlnx,zynqmp-clk.txt to yaml
dt-bindings: clock: xlnx,versal-clk: drop select:false
dt-bindings: clock: versal: Add versal-net compatible string
dt-bindings: clock: ast2600: Add I3C and MAC reset definitions
dt-bindings: arm: hisilicon,cpuctrl: Merge "hisilicon,hix5hd2-clock" into parent binding

* clk-starfive:
reset: starfive: jh7110: Add StarFive STG/ISP/VOUT resets support
clk: starfive: Simplify .determine_rate()
clk: starfive: Add StarFive JH7110 Video-Output clock driver
clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver
clk: starfive: Add StarFive JH7110 System-Top-Group clock driver
clk: starfive: jh7110-sys: Add PLL clocks source from DTS
clk: starfive: Add StarFive JH7110 PLL clock driver
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator
dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator
dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs
dt-bindings: soc: starfive: Add StarFive syscon module
dt-bindings: clock: Add StarFive JH7110 PLL clock generator

* clk-rm:
dt-bindings: clk: oxnas: remove obsolete bindings
clk: oxnas: remove obsolete clock driver

* clk-renesas:
clk: renesas: rcar-gen3: Add ADG clocks
clk: renesas: r8a77965: Add 3DGE and ZG support
clk: renesas: r8a7796: Add 3DGE and ZG support
clk: renesas: r8a7795: Add 3DGE and ZG support
clk: renesas: emev2: Remove obsolete clkdev registration
clk: renesas: r9a07g043: Add MTU3a clock and reset entry
clk: renesas: rzg2l: Simplify .determine_rate()
clk: renesas: r9a09g011: Add CSI related clocks
clk: renesas: r8a774b1: Add 3DGE and ZG support
clk: renesas: r8a774e1: Add 3DGE and ZG support
clk: renesas: r8a774a1: Add 3DGE and ZG support
clk: renesas: rcar-gen3: Add support for ZG clock

* clk-cleanup:
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()
clk: Explicitly include correct DT includes

show more ...

Merge tag 'renesas-clk-for-v6.6-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull another Renesas clk driver update from Geert Uytterhoeven:

- Add

Merge tag 'renesas-clk-for-v6.6-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull another Renesas clk driver update from Geert Uytterhoeven:

- Add Audio Clock Generator (ADG) clocks on R-Car Gen3 and RZ/G2 SoCs

* tag 'renesas-clk-for-v6.6-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: rcar-gen3: Add ADG clocks

show more ...

clk: renesas: rcar-gen3: Add ADG clocks

R-Car Sound needs to enable "ADG" on RMSTPCR9/SMSTPCR9 bit 22 to use
clk_i which came from the internal S0D4 or ZA2 clock.

Signed-off-by: Kuninori Morimoto <

clk: renesas: rcar-gen3: Add ADG clocks

R-Car Sound needs to enable "ADG" on RMSTPCR9/SMSTPCR9 bit 22 to use
clk_i which came from the internal S0D4 or ZA2 clock.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Vincenzo De Michele <vincenzo.michele@davinci.de> # R-Car M3-N
Tested-by: Patrick Keil <patrick.keil@conti-engineering.com> # R-Car M3-N
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/87pm47prox.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87o7jrpros.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87mszbpron.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87leevproh.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87jzufprod.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87il9zpro8.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87h6pjpro4.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87fs53prny.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87edknprnt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

Merge tag 'renesas-clk-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

- Add graphi

Merge tag 'renesas-clk-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

- Add graphics clock support on RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3,
M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on RZ/V2M
- Add PWM (MTU3) clock and reset on RZ/G2UL and RZ/Five
- Miscellaneous fixes and improvements

* tag 'renesas-clk-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r8a77965: Add 3DGE and ZG support
clk: renesas: r8a7796: Add 3DGE and ZG support
clk: renesas: r8a7795: Add 3DGE and ZG support
clk: renesas: emev2: Remove obsolete clkdev registration
clk: renesas: r9a07g043: Add MTU3a clock and reset entry
clk: renesas: rzg2l: Simplify .determine_rate()
clk: renesas: r9a09g011: Add CSI related clocks
clk: renesas: r8a774b1: Add 3DGE and ZG support
clk: renesas: r8a774e1: Add 3DGE and ZG support
clk: renesas: r8a774a1: Add 3DGE and ZG support
clk: renesas: rcar-gen3: Add support for ZG clock

show more ...

clk: renesas: r8a77965: Add 3DGE and ZG support

The 3DGE and ZG clocks are necessary to support the 3D graphics.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kerne

clk: renesas: r8a77965: Add 3DGE and ZG support

The 3DGE and ZG clocks are necessary to support the 3D graphics.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1767d01cfffd7490861f2cf6ad6c0df100916907.1689599217.git.geert+renesas@glider.be

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko

Merge drm/drm-next into drm-intel-gt-next

Daniele needs 84d4333c1e28 ("misc/mei: Add NULL check to component match
callback functions") in order to merge the DG2 HuC patches.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge part of branch 'for-next.instantiate' into for-next

Merge drm/drm-next into drm-intel-next

Sync up. In special to get the drm-intel-gt-next stuff.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging from drm/drm-next for the final fixes that will go
into v5.20.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v5.19-rc5' into next

Merge with mainline to bring up the latest definition from MFD subsystem
needed for Mediatek keypad driver.

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major -

Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.19

A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get new regmap APIs of v5.19-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>