Merge drm/drm-fixes into drm-misc-fixes

Getting fixes and updates from v7.1-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after m

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.

Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.

Core:
- Remove the round_rate() clk op (yay!)

New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...

show more ...

Merge branches 'clk-fixes', 'clk-renesas', 'clk-rpi', 'clk-eswin' and 'clk-mediatek' into clk-next

- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support

* clk-fixes:
clk: spa

Merge branches 'clk-fixes', 'clk-renesas', 'clk-rpi', 'clk-eswin' and 'clk-mediatek' into clk-next

- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support

* clk-fixes:
clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc()
clk: microchip: mpfs-ccc: fix out of bounds access during output registration
clk: qcom: dispcc-sm8450: use RCG2 ops for DPTX1 AUX clock source

* clk-renesas:
clk: renesas: Add support for RZ/G3L SoC
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3L SoC
clk: renesas: rzg2l: Re-enable critical module clocks during resume
clk: renesas: rzg2l: Add rzg2l_mod_clock_init_mstop_helper()
clk: renesas: rzg2l: Add helper for mod clock enable/disable
clk: renesas: r9a0{7g04[34],8g045}: Add critical reset entries
clk: renesas: rzg2l: Add support for critical resets
clk: renesas: r9a09g056: Remove entries for WDT{0,2,3}
clk: renesas: r9a06g032: Enable watchdog reset sources
clk: renesas: cpg-mssr: Use struct_size() helper
clk: renesas: r9a09g047: Add PCIe clocks and reset
clk: renesas: r9a09g057: Add PCIe clocks and reset
clk: renesas: r9a09g056: Add PCIe clocks and reset
clk: renesas: r9a09g047: Add entries for the RSPIs
clk: renesas: r9a09g056: Add clock and reset entries for RTC
clk: renesas: r9a09g057: Remove entries for WDT{0,2,3}
clk: renesas: r9a09g056: Fix ordering of module clocks array
clk: renesas: r9a09g057: Fix ordering of module clocks array

* clk-rpi:
clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks

* clk-eswin:
MAINTAINERS: Add entry for ESWIN EIC7700 clock driver
clk: eswin: Add eic7700 clock driver
clk: divider: Add devm_clk_hw_register_divider_parent_data
dt-bindings: clock: eswin: Documentation for eic7700 SoC

* clk-mediatek:
clk: airoha: Add econet EN751221 clock/reset support to en7523-scu
dt-bindings: clock, reset: Add econet EN751221

show more ...

Merge tag 'renesas-clk-for-v7.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull more Renesas clk driver updates from Geert Uytterhoeven:

- Add SP

Merge tag 'renesas-clk-for-v7.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull more Renesas clk driver updates from Geert Uytterhoeven:

- Add SPI clocks and resets on Renesas RZ/G3E
- Add PCIe clocks and resets on Renesas RZ/V2N, RZ/V2H(P), and RZ/G3E
- Enable watchdog reset on Renesas RZ/N1D
- Remove clocks for watchdogs meant for other CPU cores on Renesas RZ/V2N
- Handle critical clock during system resume on Renesas RZ/G2L, RZ/G2UL, and
RZ/G3S
- Add initial support for the Renesas RZ/G3L (R9A08G046) SoC

* tag 'renesas-clk-for-v7.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: Add support for RZ/G3L SoC
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3L SoC
clk: renesas: rzg2l: Re-enable critical module clocks during resume
clk: renesas: rzg2l: Add rzg2l_mod_clock_init_mstop_helper()
clk: renesas: rzg2l: Add helper for mod clock enable/disable
clk: renesas: r9a0{7g04[34],8g045}: Add critical reset entries
clk: renesas: rzg2l: Add support for critical resets
clk: renesas: r9a09g056: Remove entries for WDT{0,2,3}
clk: renesas: r9a06g032: Enable watchdog reset sources
clk: renesas: cpg-mssr: Use struct_size() helper
clk: renesas: r9a09g047: Add PCIe clocks and reset
clk: renesas: r9a09g057: Add PCIe clocks and reset
clk: renesas: r9a09g056: Add PCIe clocks and reset
clk: renesas: r9a09g047: Add entries for the RSPIs

show more ...

clk: renesas: Add support for RZ/G3L SoC

The clock structure for RZ/G3L is almost identical to that of the RZ/G3S
SoC with more IP blocks such as LCDC, CRU, LVDS, and GPU.

Add minimal clock and res

clk: renesas: Add support for RZ/G3L SoC

The clock structure for RZ/G3L is almost identical to that of the RZ/G3S
SoC with more IP blocks such as LCDC, CRU, LVDS, and GPU.

Add minimal clock and reset entries required to boot the system on
Renesas RZ/G3L SMARC EVK and bind it with the RZ/G2L CPG core driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260324114329.268249-8-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are f

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are followup fixes to be applied.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge commit 'linus' into core/bugs, to resolve conflicts

Resolve conflicts with this commit that was developed in parallel
during the merge window:

8c8efa93db68 ("x86/bug: Add ARCH_WARN_ASM macro

Merge commit 'linus' into core/bugs, to resolve conflicts

Resolve conflicts with this commit that was developed in parallel
during the merge window:

8c8efa93db68 ("x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust")

Conflicts:
arch/riscv/include/asm/bug.h
arch/x86/include/asm/bug.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.18 merge window.

Merge tag 'v6.17-rc2' into HEAD

Sync up with mainline to bring in changes to include/linux/sprintf.h

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to drm-misc-next-fixes to get features and fixes from
v6.17-rc6.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Catching up with some display dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-xe-next

Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.

Signed-off-by: Lucas De

Merge drm/drm-next into drm-xe-next

Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-n

Updating drm-misc-next to the state of v6.17-rc1. Begins a new release
cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.17-rc1. Begins a new release
cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.

The big pa

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.

The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.

The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.

Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.

New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N

Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...

show more ...

Merge branches 'clk-renesas', 'clk-samsung', 'clk-spacemit', 'clk-allwinner' and 'clk-amlogic' into clk-next

* clk-renesas: (42 commits)
clk: renesas: r9a08g045: Add MSTOP for coupled clocks as we

Merge branches 'clk-renesas', 'clk-samsung', 'clk-spacemit', 'clk-allwinner' and 'clk-amlogic' into clk-next

* clk-renesas: (42 commits)
clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well
clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs
clk: renesas: r9a09g057: Add XSPI clock/reset
clk: renesas: r9a09g056: Add XSPI clock/reset
clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting
clk: renesas: r9a09g057: Add support for xspi mux and divider
clk: renesas: r9a09g056: Add support for xspi mux and divider
clk: renesas: r9a09g077: Add RIIC module clocks
clk: renesas: r9a09g077: Add PLL2 and SDHI clock support
clk: renesas: rzv2h: Drop redundant base pointer from pll_clk
clk: renesas: r9a09g057: Add entries for the RSPIs
dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID
dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock
clk: renesas: rzv2h: Add missing include file
clk: renesas: rzv2h: Use devm_kmemdup_array()
clk: renesas: Add CPG/MSSR support to RZ/N2H SoC
clk: renesas: r9a09g077: Add PCLKL core clock
dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support
dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC
dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID
...

* clk-samsung:
clk: samsung: exynosautov920: add block hsi2 clock support
dt-bindings: clock: exynosautov920: add hsi2 clock definitions
dt-bindings: clock: exynosautov920: sort clock definitions
clk: samsung: exynos850: fix a comment
clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock
clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD

* clk-spacemit:
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
reset: spacemit: add support for SpacemiT CCU resets
clk: spacemit: mark K1 pll1_d8 as critical
clk: spacemit: define three reset-only CCUs
clk: spacemit: set up reset auxiliary devices
soc: spacemit: create a header for clock/reset registers
dt-bindings: soc: spacemit: define spacemit,k1-ccu resets

* clk-allwinner:
clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate()
clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll
clk: sunxi-ng: v3s: Fix de clock definition
clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset

* clk-amlogic:
clk: amlogic: s4: remove unused data
clk: amlogic: drop clk_regmap tables
clk: amlogic: get regmap with clk_regmap_init
clk: amlogic: remove unnecessary headers
clk: amlogic: axg-audio: use the auxiliary reset driver

show more ...

Merge tag 'renesas-clk-for-v6.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

- Add Expand

Merge tag 'renesas-clk-for-v6.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

- Add Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- Add SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- Add SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Add Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Add Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Add timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on
Renesas RZ/V2N
- Rework Module Stop and Power Domain support on the Renesas
RZ/G2L family of SoCs (especially on RZ/G3S)
- Add I3C clocks and resets on Renesas RZ/G3E

* tag 'renesas-clk-for-v6.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: (42 commits)
clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well
clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs
clk: renesas: r9a09g057: Add XSPI clock/reset
clk: renesas: r9a09g056: Add XSPI clock/reset
clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting
clk: renesas: r9a09g057: Add support for xspi mux and divider
clk: renesas: r9a09g056: Add support for xspi mux and divider
clk: renesas: r9a09g077: Add RIIC module clocks
clk: renesas: r9a09g077: Add PLL2 and SDHI clock support
clk: renesas: rzv2h: Drop redundant base pointer from pll_clk
clk: renesas: r9a09g057: Add entries for the RSPIs
dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID
dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock
clk: renesas: rzv2h: Add missing include file
clk: renesas: rzv2h: Use devm_kmemdup_array()
clk: renesas: Add CPG/MSSR support to RZ/N2H SoC
clk: renesas: r9a09g077: Add PCLKL core clock
dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support
dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC
dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID
...

show more ...

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

clk: renesas: Add CPG/MSSR support to RZ/N2H SoC

Add clock driver support for the Renesas RZ/N2H (R9A09G087) SoC by reusing
the existing RZ/T2H (R9A09G077) CPG/MSSR implementation, as both SoCs
shar

clk: renesas: Add CPG/MSSR support to RZ/N2H SoC

Add clock driver support for the Renesas RZ/N2H (R9A09G087) SoC by reusing
the existing RZ/T2H (R9A09G077) CPG/MSSR implementation, as both SoCs
share the same clock and reset architecture.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250617155757.149597-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

clk: renesas: Add support for R9A09G077 SoC

RZ/T2H has 2 register blocks at different addresses.

The clock tree has configurable dividers and mux selectors.
Add these new clock types, new register

clk: renesas: Add support for R9A09G077 SoC

RZ/T2H has 2 register blocks at different addresses.

The clock tree has configurable dividers and mux selectors.
Add these new clock types, new register layout type, and
registration code for mux and div in registration callback.

Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250515141828.43444-6-thierry.bultel.yh@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>