Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge 6.11-rc7 into usb-next

We need the USB fixes in here as well, and this also resolves the merge
conflict in:
drivers/usb/typec/ucsi/ucsi.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>

Merge 6.11-rc7 into usb-next

We need the USB fixes in here as well, and this also resolves the merge
conflict in:
drivers/usb/typec/ucsi/ucsi.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge 6.11-rc7 into char-misc-next

We need the char-misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.1

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in t

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.

The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.

Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.

Follows the list of the rest of the changes grouped by type of
change.

Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.

The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.

The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.

Constified a few global data structures in the virtio driver.

The Renesas driver simplifies the bus speed handling in the init
function making it more readable.

Improved an if/else statement in probe function of the Renesas
R-Car driver.

The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().

Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.

Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.

Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.

Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.

The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.

In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.

New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.

New support
-----------
Added support for:

- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.

The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.

Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.

Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.

The i2c-sprd binding has been converted to YAML.

show more ...

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...

Merge tag 'v6.11-rc1' into for-6.12

Linux 6.11-rc1

Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

The Aspeed driver tracks the controller's state (stop, pending,
start, etc.

Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

The Aspeed driver tracks the controller's state (stop, pending,
start, etc.). Previously, when the stop command was sent, the
state was not updated. The fix in this pull request ensures the
driver's state is aligned with the device status.

The Intel SCH driver receives a new look, and among the cleanups,
there is a fix where, due to an oversight, an if/else statement
was missing the else, causing it to move forward instead of
exiting the function in case of an error.

The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the
IRQ setup to prevent unwanted interrupts during probe.

The Xilinx XPS controller fixes TX FIFO handling to avoid missed
NAKs. Another fix ensures the controller is reinitialized when
the bus appears busy.

show more ...

Merge v6.11-rc7 into drm-next

Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.

Signed-off-by: Simona Vetter <simona.v

Merge v6.11-rc7 into drm-next

Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.

Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>

show more ...

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter

Merge drm/drm-next into drm-xe-next

Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to the state of v6.11-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'linus' into timers/core

To update with the latest fixes.

Merge branch 'linus' into x86/mm

Bring x86 and selftests up to date

Merge tag 'loongarch-kvm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.12

1. Revert qspinlock to test-and-set simple lock o

Merge tag 'loongarch-kvm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.12

1. Revert qspinlock to test-and-set simple lock on VM.
2. Add Loongson Binary Translation extension support.
3. Add PMU support for guest.
4. Enable paravirt feature control from VMM.
5. Implement function kvm_para_has_feature().

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts (sort of) and no adjacent changes.

This merge reverts commit b3c9e65eb

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts (sort of) and no adjacent changes.

This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"A pile of Qualcomm clk driver fixes with two main themes: the alpha
P

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"A pile of Qualcomm clk driver fixes with two main themes: the alpha
PLL driver and shared RCGs, and one fix for the Starfive JH7110 SoC.

- The Alpha PLL clk_ops had multiple problems around setting rates.

There are a handful of patches here that fix masks and skip
enabling the clk from set_rate() when the PLL is disabled. The PLLs
are crucial to operation of the system as almost all frequencies in
the system are derived from them.

- Parking shared RCGs at a slow always on clk at registration time
breaks stuff.

USB host mode can't handle such a slow frequency and the serial
console gets all garbled when the UART clk is handed over to the
kernel. There's a few patches that don't use the shared clk_ops for
the UART clks and another one to skip parking the USB clk at
registration time.

- The Starfive PLL driver used for the CPU was busted causing cpufreq
to fail because the clk didn't change to a safe parent during
set_rate().

The fix is to register a notifier and switch to a safe parent so
the PLL can change rate in a glitch free manner"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc8280xp: don't use parking clk_ops for QUPs
clk: starfive: jh7110-sys: Add notifier for PLL0 clock
clk: qcom: gcc-sm8650: Don't use shared clk_ops for QUPs
clk: qcom: gcc-sm8550: Don't park the USB RCG at registration time
clk: qcom: gcc-sm8550: Don't use parking clk_ops for QUPs
clk: qcom: gcc-x1e80100: Don't use parking clk_ops for QUPs
clk: qcom: ipq9574: Update the alpha PLL type for GPLLs
clk: qcom: gcc-x1e80100: Fix USB 0 and 1 PHY GDSC pwrsts flags
clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL
clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is disabled
clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API
clk: qcom: clk-alpha-pll: Fix the pll post div mask

show more ...

clk: qcom: gcc-sm8650: Don't use shared clk_ops for QUPs

The QUPs aren't shared in a way that requires parking the RCG at an
always on parent in case some other entity turns on the clk. The
hardware

clk: qcom: gcc-sm8650: Don't use shared clk_ops for QUPs

The QUPs aren't shared in a way that requires parking the RCG at an
always on parent in case some other entity turns on the clk. The
hardware is capable of setting a new frequency itself with the DFS mode,
so parking is unnecessary. Furthermore, there aren't any GDSCs for these
devices, so there isn't a possibility of the GDSC turning on the clks
for housekeeping purposes.

Like for the SM8550 GCC QUP clocks at [1], do not use shared clk_ops for QUPs.

[1] https://lore.kernel.org/all/20240827231237.1014813-3-swboyd@chromium.org/

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240829-topic-sm8650-upstream-fix-qup-clk-rcg-shared-v1-1-7ecdbc672187@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This a large collection of clk driver updates and a handful of new SoC
cl

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This a large collection of clk driver updates and a handful of new SoC
clk driver support.

We have the usual Qualcomm clk drivers, along with clk drivers for the
Sophgo and T-Head vendors, all to support some new SoCs.

Nothing in particular stands out to me in the updates. There's the
interconnect clk driver which exposes clks as interconnects, crossing
subsystems. There's a bunch of janitorial things that are improving
drivers in general like kmemdup_array() or fixing error paths. But
overall the updates look normal to fix the description data which is
usually the stuff that's wrong and/or untested.

Core:
- Skip gate basic type KUnit tests on s390 due to lack of MMIO
emulation

New Drivers:
- AP sub-system clock controller in the T-Head TH1520
- Sophgo Sophon sg2042 clk driver
- Qualcomm SM7150 camera, display and video clk drivers
- Qualcomm QCM2290 GPU clk driver
- Qualcomm QCS8386/QCS8084 NSS clk driver
- Qualcomm SM8650 camera and video drivers

Updates:
- Add reset support to Airoha EN7581 clk driver
- Add MODULE_DESCRIPTIONs to various clk drivers
- Introduce helper logic to expose clock controllers as simple
interconnect providers
- Use the interconnect helper above on Qualcomm ipq9574
- Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on
Qualcomm X1Elite
- Improve error handling in Qualcomm kpss-xcc driver
- Mark Qualcomm SC8280XP LPASS clock controller regmap_config const
- Export more clocks for Rockchip rk3128 peripherals
- Convert Rockchip clk drivers to use kmemdup_array()
- Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers
- Make qcom_cc_really_probe() take a struct device to allow reuse in
non-platform-drivers
- Introduce prepare-only branch clock ops in the qcom clk driver to
support clocks on buses that take locks
- Describe parent/child relationship for Qualcomm SC7280 camera GDSCs
- Support Qualcomm Huayra 2290 alpha PLL
- Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to
match HS200 support
- Add missing PCIe PIPE clocks on Qualcomm IPQ9574
- Fix various configurations and properties in the Qualcomm SA8775P,
X1E80100 and SM7280 drivers
- Park Qualcomm SM8350 GPU RCGs on XO while disabled
- Remove unused CONFIG_QCOM_RPMCC Kconfig symbol
- exynos-clkout: Remove usage of of_device_id table as
.of_match_table, because the driver is instantiated as MFD cell,
not as standalone platform driver. Populated .of_match_table
confused people few times to convert the code to
device_get_match_data(), which broke the driver
- Mark one Samsung UFS clock as critical, because having it off stops
the system from shutdown
- Use kmemdup_array() when applicable
- Remove unused 'struct gates_data' from old sunxi driver library
- Add GPADC clock and reset for Allwinner H616
- Minor Amlogic S4 clock fixes
- DT bindings Yaml conversion of the Amlogic AXG audio controller
- Amlogic C3 clock controllers support
- Amlogic clk flag added to skip init of already enabled PLLs and
avoid relocking
- Amlogic A1 DT bindings updates for system pll support
- Add missing MODULE_DESCRIPTION where necessary
- Remove obsolete clock DT binding header files
- Add Battery Backup (VBATTB) and I2C clocks, resets, and power
domains on Renesas RZ/G3S
- Add audio clocks on Renesas R-Car V4M
- Add video capture (ISPCS, CSI-2, VIN) clocks on Renesas R-Car V4M"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits)
clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate()
clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id()
clk: mxs: Use clamp() in clk_ref_round_rate() and clk_ref_set_rate()
clk: sunxi-ng r40: Constify struct regmap_config
clk: en7523: fix rate divider for slic and spi clocks
clk: lpc32xx: Constify struct regmap_config
clk: xilinx: Constify struct regmap_config
clk: en7523: Remove PCIe reset open drain configuration for EN7581
clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC
clk: en7523: Add reset-controller support for EN7581 SoC
dt-bindings: clock: airoha: Add reset support to EN7581 clock binding
dt-bindings: clock: mediatek: Document reset cells for MT8188 sys
clk: mediatek: mt8173-infracfg: Handle unallocated infracfg when module
dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesys
dt-bindings: clock: sprd,sc9860-clk: convert to YAML
dt-bindings: clock: qoriq-clock: convert to yaml format
clk: qcom: Park shared RCGs upon registration
clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
...

show more ...

Merge branches 'clk-qcom', 'clk-rockchip', 'clk-sophgo' and 'clk-thead' into clk-next

- Add support for the AP sub-system clock controller in the T-Head TH1520

* clk-qcom: (71 commits)
clk: qcom

Merge branches 'clk-qcom', 'clk-rockchip', 'clk-sophgo' and 'clk-thead' into clk-next

- Add support for the AP sub-system clock controller in the T-Head TH1520

* clk-qcom: (71 commits)
clk: qcom: Park shared RCGs upon registration
clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
clk: qcom: common: Add interconnect clocks support
interconnect: icc-clk: Add devm_icc_clk_register
interconnect: icc-clk: Specify master/slave ids
dt-bindings: clock: qcom: Add AHB clock for SM8150
clk: qcom: gcc-x1e80100: Set parent rate for USB3 sec and tert PHY pipe clks
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
clk: qcom: kpss-xcc: Return of_clk_add_hw_provider to transfer the error
clk: qcom: lpasscc-sc8280xp: Constify struct regmap_config
clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocks
clk: qcom: gcc-ipq6018: update sdcc max clock frequency
clk: qcom: camcc-sm8650: Add SM8650 camera clock controller driver
dt-bindings: clock: qcom: Add SM8650 camera clock controller
dt-bindings: clock: qcom: Update the order of SC8280XP camcc header
clk: qcom: videocc-sm8550: Add SM8650 video clock controller
clk: qcom: videocc-sm8550: Add support for videocc XO clk ares
dt-bindings: clock: qcom: Add SM8650 video clock controller
dt-bindings: clock: qcom: Update SM8450 videocc header file name
clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC's
...

* clk-rockchip:
dt-bindings: clock: rk3188-cru-common: remove CLK_NR_CLKS
clk: rockchip: rk3188: Drop CLK_NR_CLKS usage
clk: rockchip: Switch to use kmemdup_array()
clk: rockchip: rk3128: Add HCLK_SFC
dt-bindings: clock: rk3128: Add HCLK_SFC
dt-bindings: clock: rk3128: Drop CLK_NR_CLKS
clk: rockchip: rk3128: Drop CLK_NR_CLKS usage
clk: rockchip: rk3128: Add hclk_vio_h2p to critical clocks
clk: rockchip: rk3128: Export PCLK_MIPIPHY
dt-bindings: clock: rk3128: Add PCLK_MIPIPHY

* clk-sophgo:
clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate()
clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id()
clk: sophgo: Add SG2042 clock driver
dt-bindings: clock: sophgo: add clkgen for SG2042
dt-bindings: clock: sophgo: add RP gate clocks for SG2042
dt-bindings: clock: sophgo: add pll clocks for SG2042

* clk-thead:
clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller

show more ...