#
e03ad65c |
| 16-Sep-2024 |
Wolfram Sang <wsa+renesas@sang-engineering.com> |
Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
The Aspeed driver tracks the controller's state (stop, pending, start, etc.
Merge tag 'i2c-host-fixes-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
The Aspeed driver tracks the controller's state (stop, pending, start, etc.). Previously, when the stop command was sent, the state was not updated. The fix in this pull request ensures the driver's state is aligned with the device status.
The Intel SCH driver receives a new look, and among the cleanups, there is a fix where, due to an oversight, an if/else statement was missing the else, causing it to move forward instead of exiting the function in case of an error.
The Qualcomm GENI I2C driver adds the IRQF_NO_AUTOEN flag to the IRQ setup to prevent unwanted interrupts during probe.
The Xilinx XPS controller fixes TX FIFO handling to avoid missed NAKs. Another fix ensures the controller is reinitialized when the bus appears busy.
show more ...
|
Revision tags: v6.11 |
|
#
b615b9c3 |
| 11-Sep-2024 |
Simona Vetter <simona.vetter@ffwll.ch> |
Merge v6.11-rc7 into drm-next
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.v
Merge v6.11-rc7 into drm-next
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
show more ...
|
Revision tags: v6.11-rc7, v6.11-rc6, v6.11-rc5, v6.11-rc4 |
|
#
ed7171ff |
| 16-Aug-2024 |
Lucas De Marchi <lucas.demarchi@intel.com> |
Merge drm/drm-next into drm-xe-next
Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for the display side. This resolves the current conflict for the enable_display module parameter
Merge drm/drm-next into drm-xe-next
Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for the display side. This resolves the current conflict for the enable_display module parameter and allows further pending refactors.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
show more ...
|
#
5c61f598 |
| 12-Aug-2024 |
Thomas Zimmermann <tzimmermann@suse.de> |
Merge drm/drm-next into drm-misc-next
Get drm-misc-next to the state of v6.11-rc2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
Revision tags: v6.11-rc3, v6.11-rc2 |
|
#
3663e2c4 |
| 01-Aug-2024 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next
Sync with v6.11-rc1 in general, and specifically get the new BACKLIGHT_POWER_ constants for power states.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
#
2f7eedca |
| 10-Sep-2024 |
Thomas Gleixner <tglx@linutronix.de> |
Merge branch 'linus' into timers/core
To update with the latest fixes.
|
#
4436e6da |
| 02-Aug-2024 |
Thomas Gleixner <tglx@linutronix.de> |
Merge branch 'linus' into x86/mm
Bring x86 and selftests up to date
|
#
1a371190 |
| 14-Sep-2024 |
Paolo Bonzini <pbonzini@redhat.com> |
Merge tag 'loongarch-kvm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.12
1. Revert qspinlock to test-and-set simple lock o
Merge tag 'loongarch-kvm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.12
1. Revert qspinlock to test-and-set simple lock on VM. 2. Add Loongson Binary Translation extension support. 3. Add PMU support for guest. 4. Enable paravirt feature control from VMM. 5. Implement function kvm_para_has_feature().
show more ...
|
#
46ae4d0a |
| 06-Sep-2024 |
Jakub Kicinski <kuba@kernel.org> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
show more ...
|
#
d1f2d51b |
| 07-Sep-2024 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd: "A pile of Qualcomm clk driver fixes with two main themes: the alpha P
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd: "A pile of Qualcomm clk driver fixes with two main themes: the alpha PLL driver and shared RCGs, and one fix for the Starfive JH7110 SoC.
- The Alpha PLL clk_ops had multiple problems around setting rates.
There are a handful of patches here that fix masks and skip enabling the clk from set_rate() when the PLL is disabled. The PLLs are crucial to operation of the system as almost all frequencies in the system are derived from them.
- Parking shared RCGs at a slow always on clk at registration time breaks stuff.
USB host mode can't handle such a slow frequency and the serial console gets all garbled when the UART clk is handed over to the kernel. There's a few patches that don't use the shared clk_ops for the UART clks and another one to skip parking the USB clk at registration time.
- The Starfive PLL driver used for the CPU was busted causing cpufreq to fail because the clk didn't change to a safe parent during set_rate().
The fix is to register a notifier and switch to a safe parent so the PLL can change rate in a glitch free manner"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc-sc8280xp: don't use parking clk_ops for QUPs clk: starfive: jh7110-sys: Add notifier for PLL0 clock clk: qcom: gcc-sm8650: Don't use shared clk_ops for QUPs clk: qcom: gcc-sm8550: Don't park the USB RCG at registration time clk: qcom: gcc-sm8550: Don't use parking clk_ops for QUPs clk: qcom: gcc-x1e80100: Don't use parking clk_ops for QUPs clk: qcom: ipq9574: Update the alpha PLL type for GPLLs clk: qcom: gcc-x1e80100: Fix USB 0 and 1 PHY GDSC pwrsts flags clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is disabled clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API clk: qcom: clk-alpha-pll: Fix the pll post div mask
show more ...
|
#
7b6dfa1b |
| 20-Aug-2024 |
Stephen Boyd <swboyd@chromium.org> |
clk: qcom: gcc-sm8550: Don't park the USB RCG at registration time
Amit Pundir reports that audio and USB-C host mode stops working if the gcc_usb30_prim_master_clk_src clk is registered and clk_rcg
clk: qcom: gcc-sm8550: Don't park the USB RCG at registration time
Amit Pundir reports that audio and USB-C host mode stops working if the gcc_usb30_prim_master_clk_src clk is registered and clk_rcg2_shared_init() parks it on XO. Skip parking this clk at registration time to fix those issues.
Partially revert commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") by skipping the parking bit for this clk, but keep the part where we cache the config register. That's still necessary to figure out the true parent of the clk at registration time.
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") Fixes: 929c75d57566 ("clk: qcom: gcc-sm8550: Mark RCGs shared where applicable") Cc: Konrad Dybcio <konradybcio@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Taniya Das <quic_tdas@quicinc.com> Reported-by: Amit Pundir <amit.pundir@linaro.org> Closes: https://lore.kernel.org/CAMi1Hd1KQBE4kKUdAn8E5FV+BiKzuv+8FoyWQrrTHPDoYTuhgA@mail.gmail.com Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240819233628.2074654-3-swboyd@chromium.org Tested-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
#
d10eeb75 |
| 20-Aug-2024 |
Stephen Boyd <swboyd@chromium.org> |
clk: qcom: gcc-sm8550: Don't use parking clk_ops for QUPs
The QUPs aren't shared in a way that requires parking the RCG at an always on parent in case some other entity turns on the clk. The hardwar
clk: qcom: gcc-sm8550: Don't use parking clk_ops for QUPs
The QUPs aren't shared in a way that requires parking the RCG at an always on parent in case some other entity turns on the clk. The hardware is capable of setting a new frequency itself with the DFS mode, so parking is unnecessary. Furthermore, there aren't any GDSCs for these devices, so there isn't a possibility of the GDSC turning on the clks for housekeeping purposes.
This wasn't a problem to mark these clks shared until we started parking shared RCGs at clk registration time in commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration"). Parking at init is actually harmful to the UART when earlycon is used. If the device is pumping out data while the frequency changes you'll see garbage on the serial console until the driver can probe and actually set a proper frequency.
Revert the QUP part of commit 929c75d57566 ("clk: qcom: gcc-sm8550: Mark RCGs shared where applicable") so that the QUPs don't get parked during clk registration and break UART operations.
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") Fixes: 929c75d57566 ("clk: qcom: gcc-sm8550: Mark RCGs shared where applicable") Cc: Konrad Dybcio <konradybcio@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Taniya Das <quic_tdas@quicinc.com> Reported-by: Amit Pundir <amit.pundir@linaro.org> Closes: https://lore.kernel.org/CAMi1Hd1KQBE4kKUdAn8E5FV+BiKzuv+8FoyWQrrTHPDoYTuhgA@mail.gmail.com Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240819233628.2074654-2-swboyd@chromium.org Tested-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Stephen Boyd <sboyd@kernel.org>
show more ...
|
#
a1ff5a7d |
| 30-Jul-2024 |
Maxime Ripard <mripard@kernel.org> |
Merge drm/drm-fixes into drm-misc-fixes
Let's start the new drm-misc-fixes cycle by bringing in 6.11-rc1.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
Revision tags: v6.11-rc1 |
|
#
a4f92855 |
| 19-Jul-2024 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "This a large collection of clk driver updates and a handful of new SoC cl
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "This a large collection of clk driver updates and a handful of new SoC clk driver support.
We have the usual Qualcomm clk drivers, along with clk drivers for the Sophgo and T-Head vendors, all to support some new SoCs.
Nothing in particular stands out to me in the updates. There's the interconnect clk driver which exposes clks as interconnects, crossing subsystems. There's a bunch of janitorial things that are improving drivers in general like kmemdup_array() or fixing error paths. But overall the updates look normal to fix the description data which is usually the stuff that's wrong and/or untested.
Core: - Skip gate basic type KUnit tests on s390 due to lack of MMIO emulation
New Drivers: - AP sub-system clock controller in the T-Head TH1520 - Sophgo Sophon sg2042 clk driver - Qualcomm SM7150 camera, display and video clk drivers - Qualcomm QCM2290 GPU clk driver - Qualcomm QCS8386/QCS8084 NSS clk driver - Qualcomm SM8650 camera and video drivers
Updates: - Add reset support to Airoha EN7581 clk driver - Add MODULE_DESCRIPTIONs to various clk drivers - Introduce helper logic to expose clock controllers as simple interconnect providers - Use the interconnect helper above on Qualcomm ipq9574 - Add CLK_SET_RATE_PARENT to the remaining USB pipe clocks on Qualcomm X1Elite - Improve error handling in Qualcomm kpss-xcc driver - Mark Qualcomm SC8280XP LPASS clock controller regmap_config const - Export more clocks for Rockchip rk3128 peripherals - Convert Rockchip clk drivers to use kmemdup_array() - Drop CLK_NR_CLKS from Rockchip rk3128 and rk3188 binding headers - Make qcom_cc_really_probe() take a struct device to allow reuse in non-platform-drivers - Introduce prepare-only branch clock ops in the qcom clk driver to support clocks on buses that take locks - Describe parent/child relationship for Qualcomm SC7280 camera GDSCs - Support Qualcomm Huayra 2290 alpha PLL - Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to match HS200 support - Add missing PCIe PIPE clocks on Qualcomm IPQ9574 - Fix various configurations and properties in the Qualcomm SA8775P, X1E80100 and SM7280 drivers - Park Qualcomm SM8350 GPU RCGs on XO while disabled - Remove unused CONFIG_QCOM_RPMCC Kconfig symbol - exynos-clkout: Remove usage of of_device_id table as .of_match_table, because the driver is instantiated as MFD cell, not as standalone platform driver. Populated .of_match_table confused people few times to convert the code to device_get_match_data(), which broke the driver - Mark one Samsung UFS clock as critical, because having it off stops the system from shutdown - Use kmemdup_array() when applicable - Remove unused 'struct gates_data' from old sunxi driver library - Add GPADC clock and reset for Allwinner H616 - Minor Amlogic S4 clock fixes - DT bindings Yaml conversion of the Amlogic AXG audio controller - Amlogic C3 clock controllers support - Amlogic clk flag added to skip init of already enabled PLLs and avoid relocking - Amlogic A1 DT bindings updates for system pll support - Add missing MODULE_DESCRIPTION where necessary - Remove obsolete clock DT binding header files - Add Battery Backup (VBATTB) and I2C clocks, resets, and power domains on Renesas RZ/G3S - Add audio clocks on Renesas R-Car V4M - Add video capture (ISPCS, CSI-2, VIN) clocks on Renesas R-Car V4M"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits) clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate() clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id() clk: mxs: Use clamp() in clk_ref_round_rate() and clk_ref_set_rate() clk: sunxi-ng r40: Constify struct regmap_config clk: en7523: fix rate divider for slic and spi clocks clk: lpc32xx: Constify struct regmap_config clk: xilinx: Constify struct regmap_config clk: en7523: Remove PCIe reset open drain configuration for EN7581 clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC clk: en7523: Add reset-controller support for EN7581 SoC dt-bindings: clock: airoha: Add reset support to EN7581 clock binding dt-bindings: clock: mediatek: Document reset cells for MT8188 sys clk: mediatek: mt8173-infracfg: Handle unallocated infracfg when module dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesys dt-bindings: clock: sprd,sc9860-clk: convert to YAML dt-bindings: clock: qoriq-clock: convert to yaml format clk: qcom: Park shared RCGs upon registration clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks ...
show more ...
|
#
589eb114 |
| 16-Jul-2024 |
Stephen Boyd <sboyd@kernel.org> |
Merge branches 'clk-qcom', 'clk-rockchip', 'clk-sophgo' and 'clk-thead' into clk-next
- Add support for the AP sub-system clock controller in the T-Head TH1520
* clk-qcom: (71 commits) clk: qcom
Merge branches 'clk-qcom', 'clk-rockchip', 'clk-sophgo' and 'clk-thead' into clk-next
- Add support for the AP sub-system clock controller in the T-Head TH1520
* clk-qcom: (71 commits) clk: qcom: Park shared RCGs upon registration clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks clk: qcom: common: Add interconnect clocks support interconnect: icc-clk: Add devm_icc_clk_register interconnect: icc-clk: Specify master/slave ids dt-bindings: clock: qcom: Add AHB clock for SM8150 clk: qcom: gcc-x1e80100: Set parent rate for USB3 sec and tert PHY pipe clks dt-bindings: interconnect: Add Qualcomm IPQ9574 support clk: qcom: kpss-xcc: Return of_clk_add_hw_provider to transfer the error clk: qcom: lpasscc-sc8280xp: Constify struct regmap_config clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocks clk: qcom: gcc-ipq6018: update sdcc max clock frequency clk: qcom: camcc-sm8650: Add SM8650 camera clock controller driver dt-bindings: clock: qcom: Add SM8650 camera clock controller dt-bindings: clock: qcom: Update the order of SC8280XP camcc header clk: qcom: videocc-sm8550: Add SM8650 video clock controller clk: qcom: videocc-sm8550: Add support for videocc XO clk ares dt-bindings: clock: qcom: Add SM8650 video clock controller dt-bindings: clock: qcom: Update SM8450 videocc header file name clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC's ...
* clk-rockchip: dt-bindings: clock: rk3188-cru-common: remove CLK_NR_CLKS clk: rockchip: rk3188: Drop CLK_NR_CLKS usage clk: rockchip: Switch to use kmemdup_array() clk: rockchip: rk3128: Add HCLK_SFC dt-bindings: clock: rk3128: Add HCLK_SFC dt-bindings: clock: rk3128: Drop CLK_NR_CLKS clk: rockchip: rk3128: Drop CLK_NR_CLKS usage clk: rockchip: rk3128: Add hclk_vio_h2p to critical clocks clk: rockchip: rk3128: Export PCLK_MIPIPHY dt-bindings: clock: rk3128: Add PCLK_MIPIPHY
* clk-sophgo: clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate() clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id() clk: sophgo: Add SG2042 clock driver dt-bindings: clock: sophgo: add clkgen for SG2042 dt-bindings: clock: sophgo: add RP gate clocks for SG2042 dt-bindings: clock: sophgo: add pll clocks for SG2042
* clk-thead: clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
show more ...
|
#
a23e1966 |
| 15-Jul-2024 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 6.11 merge window.
|
Revision tags: v6.10 |
|
#
ef0ae098 |
| 08-Jul-2024 |
Stephen Boyd <sboyd@kernel.org> |
Merge tag 'qcom-clk-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
- Add clk drivers for Qualcomm SM71
Merge tag 'qcom-clk-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
- Add clk drivers for Qualcomm SM7150 camera, display and video - Add Qualcomm QCM2290 GPU clk driver - Add Qualcomm QCS8386/QCS8084 NSS clk driver - Add Qualcomm SM8650 camera and video drivers - Make qcom_cc_really_probe() take a struct device to allow reuse in non-platform-drivers - Introduce prepare-only branch clock ops in the qcom clk driver to support clocks on buses that take locks - Describe parent/child relationship for Qualcomm SC7280 camera GDSCs - Support Qualcomm Huayra 2290 alpha PLL - Adjust the highest SDCC clock frequency on Qualcomm IPQ6018 to match HS200 support - Add missing PCIe PIPE clocks on Qualcomm IPQ9574 - Fix various configurations and properties in the Qualcomm SA8775P, X1E80100 and SM7280 drivers - Park Qualcomm SM8350 GPU RCGs on XO while disabled - Remove unused CONFIG_QCOM_RPMCC Kconfig symbol - Add missing MODULE_DESCRIPTIONs to some qcom clk drivers
* tag 'qcom-clk-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (61 commits) clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocks clk: qcom: gcc-ipq6018: update sdcc max clock frequency clk: qcom: camcc-sm8650: Add SM8650 camera clock controller driver dt-bindings: clock: qcom: Add SM8650 camera clock controller dt-bindings: clock: qcom: Update the order of SC8280XP camcc header clk: qcom: videocc-sm8550: Add SM8650 video clock controller clk: qcom: videocc-sm8550: Add support for videocc XO clk ares dt-bindings: clock: qcom: Add SM8650 video clock controller dt-bindings: clock: qcom: Update SM8450 videocc header file name clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC's clk: qcom: gpucc-sa8775p: Park RCG's clk source at XO during disable clk: qcom: gpucc-sa8775p: Remove the CLK_IS_CRITICAL and ALWAYS_ON flags clk: qcom: gcc-sa8775p: Set FORCE_MEM_CORE_ON for gcc_ufs_phy_ice_core_clk clk: qcom: gcc-sa8775p: Update the GDSC wait_val fields and flags clk: qcom: gcc-sa8775p: Remove support for UFS hw ctl clocks clk: qcom: gpucc-sm8350: Park RCG's clk source at XO during disable clk: qcom: nsscc-qca8k: Fix the MDIO functions undefined issue clk: qcom: select right config in CLK_QCM2290_GPUCC definition clk: qcom: Remove QCOM_RPMCC symbol clk: qcom: Add QCM2290 GPU clock controller driver ...
show more ...
|
Revision tags: v6.10-rc7, v6.10-rc6, v6.10-rc5, v6.10-rc4, v6.10-rc3 |
|
#
9f93a0a4 |
| 05-Jun-2024 |
Luo Jie <quic_luoj@quicinc.com> |
clk: qcom: common: commonize qcom_cc_really_probe
The previous wrapper qcom_cc_really_probe takes the platform device as parameter, which is limited to platform driver.
As for qca8k clock controlle
clk: qcom: common: commonize qcom_cc_really_probe
The previous wrapper qcom_cc_really_probe takes the platform device as parameter, which is limited to platform driver.
As for qca8k clock controller driver, which is registered as the MDIO device, which also follows the qcom clock framework.
To commonize qcom_cc_really_probe, updating it to take the struct device as parameter, so that the qcom_cc_really_probe can be utilized by the previous platform device and the new added MDIO device.
Also update the current clock controller drivers to take &pdev->dev as parameter when calling qcom_cc_really_probe.
Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Luo Jie <quic_luoj@quicinc.com> Link: https://lore.kernel.org/r/20240605124541.2711467-4-quic_luoj@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
show more ...
|
Revision tags: v6.10-rc2 |
|
#
6f47c7ae |
| 28-May-2024 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v6.9' into next
Sync up with the mainline to bring in the new cleanup API.
|
Revision tags: v6.10-rc1 |
|
#
60a2f25d |
| 16-May-2024 |
Tvrtko Ursulin <tursulin@ursulin.net> |
Merge drm/drm-next into drm-intel-gt-next
Some display refactoring patches are needed in order to allow conflict- less merging.
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
#
594ce0b8 |
| 10-Jun-2024 |
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
Merge topic branches 'clkdev' and 'fixes' into for-linus
|
Revision tags: v6.9, v6.9-rc7, v6.9-rc6, v6.9-rc5, v6.9-rc4, v6.9-rc3, v6.9-rc2, v6.9-rc1 |
|
#
b228ab57 |
| 18-Mar-2024 |
Andrew Morton <akpm@linux-foundation.org> |
Merge branch 'master' into mm-stable
|
#
79790b68 |
| 12-Apr-2024 |
Thomas Hellström <thomas.hellstrom@linux.intel.com> |
Merge drm/drm-next into drm-xe-next
Backmerging drm-next in order to get up-to-date and in particular to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.
Signed-off-by: Thomas Hellström <tho
Merge drm/drm-next into drm-xe-next
Backmerging drm-next in order to get up-to-date and in particular to access commit 9ca5facd0400f610f3f7f71aeb7fc0b949a48c67.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
show more ...
|
#
3e5a516f |
| 08-Apr-2024 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
Merge tag 'phy_dp_modes_6.10' into msm-next-lumag
Merge DisplayPort subnode API in order to allow DisplayPort driver to configure the PHYs either to the DP or eDP mode, depending on hardware configu
Merge tag 'phy_dp_modes_6.10' into msm-next-lumag
Merge DisplayPort subnode API in order to allow DisplayPort driver to configure the PHYs either to the DP or eDP mode, depending on hardware configuration.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
show more ...
|
#
5add703f |
| 02-Apr-2024 |
Rodrigo Vivi <rodrigo.vivi@intel.com> |
Merge drm/drm-next into drm-intel-next
Catching up on 6.9-rc2
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|