Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge drm/drm-next into drm-intel-next

Backmerge to bring Xe driver to drm-intel-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@k

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers,

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-misc-next

Let's kickstart the v6.8 release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'tip/perf/urgent'

Avoid conflicts, base on fixes.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk driver updates from Stephen Boyd:
"Herein lies a smallish collection of clk driver updates and some cor

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk driver updates from Stephen Boyd:
"Herein lies a smallish collection of clk driver updates and some core
clk framework changes for the merge window. The core framework changes
are only improving the debugfs interface to allow phase adjustments
and report which consumers of a clk there are. These are most likely
only of interest to kernel developers.

On the clk driver side, it's a ghastly amount of updates with only a
handful of new clk drivers. We have a couple new clk drivers for
Qualcomm, per usual, and a driver for Renesas, Amlogic, and TI
respectively. The updates are spread throughout the clk drivers.

Some highlights are fixing kunit tests for different configurations
like lockdep and big-endian, avoiding integer overflow in rate
settable clks, moving clk_hw_onecell_data to the end of allocations so
that drivers don't corrupt their private data, and migrating clk
drivers to the regmap maple tree. Otherwise it's the usual fixes to
clk drivers that only come along with testing the drivers on real
hardware.

New Drivers:
- Add clock driver for TWL6032
- Initial support for the Qualcomm SM4450 Global Clock Controller and
SM4450 RPMh clock controllers
- Add Camera Clock Controller on Qualcomm SM8550
- Add support for the Renesas RZ/G3S (R9A08G045) SoC
- Add Amlogic s4 main clock controller support

Updates:
- Make clk kunit tests work with lockdep
- Fix clk gate kunit test for big-endian
- Convert more than a handful of clk drivers to use regmap maple tree
- Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk
implementation
- Add consumer info to clk debugfs
- Fix various clk drivers that have clk_hw_onecell_data not at the
end of an allocation
- Drop CLK_SET_RATE_PARENT for clocks with fixed-rate GPLLs across a
variety of Qualcomm IPQ platforms
- Add missing parent of APCS PLL on Qualcomm IPQ6018
- Add I2C QUP6 clk on Qualcomm IPQ6018 but mark it critical to avoid
problems with RPM
- Implement safe source switching for a53pll and use on Qualcomm
IPQ5332
- Add support for Stromer Plus PLLs to Qualcomm clk driver
- Switch Qualcomm SM8550 Video and GPU clock controllers to use OLE
PLL configure method
- Non critical fixes to halt bit checks in Qualcomm clk drivers
- Add SMMU GDSC for Qualcomm MSM8998
- Fix possible integer overflow in Qualcomm RCG frequency calculation
code
- Remove RPM managed clks from Qualcomm MSM8996 GCC driver
- Add HFPLL configuration for the three HFPLLs in Qualcomm MSM8976
- Switch Qualcomm MSM8996 CBF clock driver's remove function to
return void
- Fix missing dependency for s4 clock controllers
- Select MXC_CLK when building in the CLK_IMX8QXP
- Fixes for error handling paths in i.MX8 ACM driver
- Move the clocks check in i.MX8 ACM driver in order to log any error
- Drop the unused return value of clk_imx_acm_detach_pm_domains
- Drop non-existant IMX8MP_CLK_AUDIOMIX_PDM_ROOT clock
- Fix error handling in i.MX8MQ clock driver
- Allow a different LCDIF1 clock parent if DT describes it for
i.MX6SX
- Keep the SCU resource table sorted in the i.MX8DXL rsrc driver
- Move the elcdif PLL clock registration above lcd_clk, as it is its
parent
- Correct some ENET specific clocks for i.MX8DXL platform
- Drop the VPU_UART and VPUCORE from i.MX8QM as latest HW revision
doesn't have them
- Remove "de-featured" MLB support from i.MX8QM/QXP/DXL platforms
- Skip registering clocks owned by Cortex-A partition SCU-based
platforms
- Add CAN_1/2 to i.MX8QM and M4_0, PI_0_PWM_0 and PI_0_I2C_0 to
i.MX8QXP resources"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits)
clk: Fix clk gate kunit test on big-endian CPUs
clk: si521xx: Increase stack based print buffer size in probe
clk: mediatek: fix double free in mtk_clk_register_pllfh()
clk: socfpga: agilex: Add bounds-checking coverage for struct stratix10_clock_data
clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data
clk: sifive: Allow building the driver as a module
clk: analogbits: Allow building the library as a module
clk: sprd: Composite driver support offset config
clk: Allow phase adjustment from debugfs
clk: Show active consumers of clocks in debugfs
clk: Use device_get_match_data()
clk: visconti: Add bounds-checking coverage for struct visconti_pll_provider
clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider
clk: cdce925: Extend match support for OF tables
clk: si570: Simplify probe
clk: si5351: Simplify probe
clk: rs9: Use i2c_get_match_data() instead of device_get_match_data()
clk: clk-si544: Simplify probe() and is_valid_frequency()
clk: si521xx: Use i2c_get_match_data() instead of device_get_match_data()
clk: meson: S4: select CONFIG_COMMON_CLK_MESON_CLKC_UTILS
...

show more ...

Merge branches 'clk-doc', 'clk-amlogic', 'clk-mediatek', 'clk-twl' and 'clk-imx' into clk-next

- Add clock driver for TWL6032

* clk-doc:
clk: linux/clk-provider.h: fix kernel-doc warnings and ty

Merge branches 'clk-doc', 'clk-amlogic', 'clk-mediatek', 'clk-twl' and 'clk-imx' into clk-next

- Add clock driver for TWL6032

* clk-doc:
clk: linux/clk-provider.h: fix kernel-doc warnings and typos

* clk-amlogic:
clk: meson: S4: select CONFIG_COMMON_CLK_MESON_CLKC_UTILS
clk: meson: S4: add support for Amlogic S4 SoC peripheral clock controller
clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
dt-bindings: clock: document Amlogic S4 SoC peripherals clock controller
dt-bindings: clock: document Amlogic S4 SoC PLL clock controller

* clk-mediatek:
clk: mediatek: fix double free in mtk_clk_register_pllfh()
clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data
clk: mediatek: clk-mt6765: Add check for mtk_alloc_clk_data

* clk-twl:
clk: twl: add clock driver for TWL6032

* clk-imx:
clk: imx: imx8qm/qxp: add more resources to whitelist
clk: imx: scu: ignore clks not owned by Cortex-A partition
clk: imx8: remove MLB support
clk: imx: imx8qm-rsrc: drop VPU_UART/VPUCORE
clk: imx: imx8qxp: correct the enet clocks for i.MX8DXL
clk: imx: imx8qxp: Fix elcdif_pll clock
clk: imx: imx8dxl-rsrc: keep sorted in the ascending order
clk: imx: imx6sx: Allow a different LCDIF1 clock parent
clk: imx: imx8mq: correct error handling path
clk: imx8mp: Remove non-existent IMX8MP_CLK_AUDIOMIX_PDM_ROOT
clk: imx: imx8: Simplify clk_imx_acm_detach_pm_domains()
clk: imx: imx8: Add a message in case of devm_clk_hw_register_mux_parent_data_table() error
clk: imx: imx8: Fix an error handling path in imx8_acm_clk_probe()
clk: imx: imx8: Fix an error handling path if devm_clk_hw_register_mux_parent_data_table() fails
clk: imx: imx8: Fix an error handling path in clk_imx_acm_attach_pm_domains()
clk: imx: Select MXC_CLK for CLK_IMX8QXP

show more ...

Merge tag 'clk-imx-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx

Pull i.MX clk driver updates from Abel Vesa:

- Select MXC_CLK when building in the CLK_IMX8QXP

Merge tag 'clk-imx-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx

Pull i.MX clk driver updates from Abel Vesa:

- Select MXC_CLK when building in the CLK_IMX8QXP
- Fixes for error handling paths in i.MX8 ACM driver
- Move the clocks check in i.MX8 ACM driver in order to log any error
- Drop the unused return value of clk_imx_acm_detach_pm_domains
- Drop non-existant IMX8MP_CLK_AUDIOMIX_PDM_ROOT clock
- Fix error handling in i.MX8MQ clock driver
- Allow a different LCDIF1 clock parent if DT describes it for i.MX6SX
- Keep the SCU resource table sorted in the i.MX8DXL rsrc driver
- Move the elcdif PLL clock registration above lcd_clk, as it is its parent
- Correct some ENET specific clocks for i.MX8DXL platform
- Drop the VPU_UART and VPUCORE from i.MX8QM as latest HW revision doesn't have them
- Remove "de-featured" MLB support from i.MX8QM/QXP/DXL platforms
- Skip registering clocks owned by Cortex-A partition SCU-based platforms
- Add CAN_1/2 to i.MX8QM and M4_0, PI_0_PWM_0 and PI_0_I2C_0 to i.MX8QXP resources

* tag 'clk-imx-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux:
clk: imx: imx8qm/qxp: add more resources to whitelist
clk: imx: scu: ignore clks not owned by Cortex-A partition
clk: imx8: remove MLB support
clk: imx: imx8qm-rsrc: drop VPU_UART/VPUCORE
clk: imx: imx8qxp: correct the enet clocks for i.MX8DXL
clk: imx: imx8qxp: Fix elcdif_pll clock
clk: imx: imx8dxl-rsrc: keep sorted in the ascending order
clk: imx: imx6sx: Allow a different LCDIF1 clock parent
clk: imx: imx8mq: correct error handling path
clk: imx8mp: Remove non-existent IMX8MP_CLK_AUDIOMIX_PDM_ROOT
clk: imx: imx8: Simplify clk_imx_acm_detach_pm_domains()
clk: imx: imx8: Add a message in case of devm_clk_hw_register_mux_parent_data_table() error
clk: imx: imx8: Fix an error handling path in imx8_acm_clk_probe()
clk: imx: imx8: Fix an error handling path if devm_clk_hw_register_mux_parent_data_table() fails
clk: imx: imx8: Fix an error handling path in clk_imx_acm_attach_pm_domains()
clk: imx: Select MXC_CLK for CLK_IMX8QXP

show more ...

clk: imx8: remove MLB support

MLB was de-featured, so drop MLB clk for i.MX8QM/QXP/DXL

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.ke

clk: imx8: remove MLB support

MLB was de-featured, so drop MLB clk for i.MX8QM/QXP/DXL

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-5-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

show more ...

clk: imx: imx8dxl-rsrc: keep sorted in the ascending order

Entries in imx8dxl_clk_scu_rsrc_table must be kept in the ascending
order, and IMX_SC_R_M4_0_UART < IMX_SC_R_M4_0_I2C.

Fixes: 036a4b4b4dfa

clk: imx: imx8dxl-rsrc: keep sorted in the ascending order

Entries in imx8dxl_clk_scu_rsrc_table must be kept in the ascending
order, and IMX_SC_R_M4_0_UART < IMX_SC_R_M4_0_I2C.

Fixes: 036a4b4b4dfa ("clk: imx: Add imx8dxl clk driver")
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230912-imx8-clk-v1-v1-1-69a34bcfcae1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

show more ...

Merge branch 'main' into zstd-linus

Merge branch 'main' into zstd-next

Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.18' into next

Sync up with mainline to get updates to OMAP4 keypad driver and other
upstream goodies.

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus

Merge tag 'asoc-fix-v5.18-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A collection of fixes that came in since the merge window, plus one new
device ID for an x86 laptop. Nothing that really stands out with
particularly big impact outside of the affected device.

show more ...

Merge branch 'topic/cs35l41' into for-next

Pull CS35L41 codec updates

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-intel-gt-next

Pull in TTM changes needed for DG2 CCS enabling from Ram.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel

Merge drm/drm-next into drm-intel-next

Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's start the 5.18 fixes cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Let's start the 5.19 development cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"There's one large change in the core clk framework here. We change how
cl

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"There's one large change in the core clk framework here. We change how
clk_set_rate_range() works so that the frequency is re-evaulated each
time the rate is changed. Previously we wouldn't let clk providers see
a rate that was different if it was still within the range, which
could be bad for power if the clk could run slower when a range
expands. Now the clk provider can decide to do something differently
when the constraints change. This broke Nvidia's clk driver so we had
to wait for the fix for that to bake a little more in -next.

The rate range patch series also introduced a kunit suite for the clk
framework that we're going to extend in the next release. It already
made it easy to find corner cases in the rate range patches so I'm
excited to see it cover more clk code and increase our confidence in
core framework patches in the future. I also added a kunit test for
the basic clk gate code and that work will continue to cover more
basic clk types: muxes, dividers, etc.

Beyond the core code we have the usual set of clk driver updates and
additions. Qualcomm again dominates the diffstat here with lots more
SoCs being supported and i.MX follows afer that with a similar number
of SoCs gaining clk drivers. Beyond those large additions there's
drivers being modernized to use clk_parent_data so we can move away
from global string names for all the clks in an SoC. Finally there's
lots of little fixes all over the clk drivers for typos, warnings, and
missing clks that aren't critical and get batched up waiting for the
next merge window to open. Nothing super big stands out in the driver
pile. Full details are below.

Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range

New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks

Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
and add support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
on Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs
(parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip
rk3568
- Reintroduce the expected fractional-divider behaviour that
disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
clk: zynq: Update the parameters to zynq_clk_register_periph_clk
clk: zynq: trivial warning fix
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
dt-bindings: clock: drop useless consumer example
dt-bindings: clock: renesas: Make example 'clocks' parsable
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: rs9: Add Renesas 9-series PCIe clock generator driver
clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
clk: visconti: prevent array overflow in visconti_clk_register_gates()
dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
clk: sifive: Move all stuff into SoCs header files from C files
clk: sifive: Add SoCs prefix in each SoCs-dependent data
riscv: dts: Change the macro name of prci in each device node
dt-bindings: change the macro name of prci in header files and example
clk: sifive: duplicate the macro definitions for the time being
clk: qcom: sm6125-gcc: fix typos in comments
clk: ti: clkctrl: fix typos in comments
...

show more ...