Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest t

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.

show more ...

Merge branch 'ovl.fixes'

Bring in an overlayfs fix for v6.13-rc1 that fixes a bug introduced by
the overlayfs changes merged for v6.13.

Signed-off-by: Christian Brauner <brauner@kernel.org>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"The core framework gained a clk provider helper, a clk consumer
helper, a

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"The core framework gained a clk provider helper, a clk consumer
helper, and some unit tests for the assigned clk rates feature in
DeviceTree. On the vendor driver side, we gained a whole pile of SoC
driver support detailed below. The majority in the diffstat is
Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
additions in here as well. The top vendors is quite common, but the
sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.

Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}

New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P
SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
SAR2130P
- Global, camera, display, GPU, and video clock controllers for
Qualcomm SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support
for the Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
reset on Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP

Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various
binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
dt-bindings: clock: axi-clkgen: include AXI clk
clk: mmp: Add Marvell PXA1908 MPMU driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APBC driver
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Switch to use struct u32_fract instead of custom one
...

show more ...

Merge branches 'clk-mobileye', 'clk-twl', 'clk-nuvoton', 'clk-renesas' and 'clk-bindings' into clk-next

- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPC

Merge branches 'clk-mobileye', 'clk-twl', 'clk-nuvoton', 'clk-renesas' and 'clk-bindings' into clk-next

- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- Convert more clk bindings to YAML

* clk-mobileye:
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: eyeq: add driver
clk: divider: Introduce CLK_DIVIDER_EVEN_INTEGERS flag
dt-bindings: clock: add Mobileye EyeQ6L/EyeQ6H clock indexes
Revert "dt-bindings: clock: mobileye,eyeq5-clk: add bindings"

* clk-twl:
clk: twl: add TWL6030 support
clk: twl: remove is_prepared

* clk-nuvoton:
clk: npcm8xx: add clock controller
reset: npcm: register npcm8xx clock auxiliary bus device
dt-bindings: reset: npcm: add clock properties

* clk-renesas:
clk: renesas: vbattb: Add VBATTB clock driver
clk: Add devm_clk_hw_register_gate_parent_hw()
clk: renesas: rzg2l: Fix FOUTPOSTDIV clk
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
clk: renesas: r9a08g045: Add power domain for RTC
clk: renesas: r9a08g045: Mark the watchdog and always-on PM domains as IRQ safe
clk: renesas: rzg2l-cpg: Use GENPD_FLAG_* flags instead of local ones
clk: renesas: rzg2l-cpg: Move PM domain power on in rzg2l_cpg_pd_setup()
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
clk: renesas: r8a779h0: Drop CLK_PLL2_DIV2 to clarify ZCn clocks
clk: renesas: r9a09g057: Add clock and reset entries for ICU
clk: renesas: r9a09g057: Add CA55 core clocks
clk: renesas: Remove duplicate and trailing empty lines

* clk-bindings:
dt-bindings: clock: actions,owl-cmu: convert to YAML
dt-bindings: clock: ti: Convert mux.txt to json-schema
dt-bindings: clock: ti: Convert divider.txt to json-schema
dt-bindings: clock: ti: Convert interface.txt to json-schema
dt-bindings: clock: convert rockchip,rk3328-cru.txt to YAML

show more ...

clk: eyeq: add EyeQ6H west fixed factor clocks

Previous setup was:
- pll-west clock registered from driver at of_clk_init();
- Both OCC and UART clocks registered from DT using fixed-factor-clock

clk: eyeq: add EyeQ6H west fixed factor clocks

Previous setup was:
- pll-west clock registered from driver at of_clk_init();
- Both OCC and UART clocks registered from DT using fixed-factor-clock
compatible.

Now that drivers/clk/clk-eyeq.c supports registering fixed factors, use
that capability to register west-per-occ and west-per-uart (giving them
proper names at the same time).

Also switch from hard-coded index 0 for pll-west to using the
EQ6HC_WEST_PLL_PER constant by exposed dt-bindings headers.

All get exposed at of_clk_init() because they get used by the AMBA PL011
serial ports. Those are instantiated before platform bus infrastructure.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-8-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: eyeq: add EyeQ6H central fixed factor clocks

Previous setup was:
- pll-cpu clock registered from driver at of_clk_init();
- occ-cpu clock registered from DT using fixed-factor-clock compatibl

clk: eyeq: add EyeQ6H central fixed factor clocks

Previous setup was:
- pll-cpu clock registered from driver at of_clk_init();
- occ-cpu clock registered from DT using fixed-factor-clock compatible.

Now that drivers/clk/clk-eyeq.c supports registering fixed factors, use
that capability to register occ-cpu.

Also switch from hard-coded index 0 for pll-cpu to using the
EQ6HC_CENTRAL_PLL_CPU constant by exposed dt-bindings headers.

occ-cpu is exposed at of_clk_init() because it gets used by both the DT
CPU nodes and the GIC timer.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-7-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: eyeq: add EyeQ5 fixed factor clocks

Expose additional clocks on EyeQ5. Some indexes come from dt-bindings
headers, others are private to the driver.

Few clocks are early (of_clk_init() stage:

clk: eyeq: add EyeQ5 fixed factor clocks

Expose additional clocks on EyeQ5. Some indexes come from dt-bindings
headers, others are private to the driver.

Few clocks are early (of_clk_init() stage: core clocks and UART clock),
others can wait until platform device probe. The source for this list
is downstream Mobileye kernel and some internal documentation.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-6-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: eyeq: add fixed factor clocks infrastructure

Driver can currently host two types of clocks:
- PLLs derived directly from the main crystal (taken using a fwhandle).
- Divider clocks derived fr

clk: eyeq: add fixed factor clocks infrastructure

Driver can currently host two types of clocks:
- PLLs derived directly from the main crystal (taken using a fwhandle).
- Divider clocks derived from those PLLs.

PLLs can be instantiated from of_clk_init() or platform device probe,
using two separate clock providers. Divider clocks are all instantiated
at platform device probe.

Add a third type of clocks: fixed factors. Those can be instantiated at
both stages. They can be parented to any clock from the driver. Early
match data and match data store the list of fixed factor clocks.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-5-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: eyeq: require clock index with phandle in all cases

We used to let compatibles with a single clock exposed to not have
a cell. Switch away from that and enforce a cell in all cases.

This is do

clk: eyeq: require clock index with phandle in all cases

We used to let compatibles with a single clock exposed to not have
a cell. Switch away from that and enforce a cell in all cases.

This is done at the same time as some compatibles
(mobileye,eyeq6h-{central,west}-olb) go from one to more clocks
exposed. Let's do the same switch and avoid future devicetree
work if/when others follow.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-4-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: eyeq: add driver

Add Mobileye EyeQ5, EyeQ6L and EyeQ6H clock controller driver. It is
both a platform driver and a hook onto of_clk_init() used for clocks
required early (GIC timer, UARTs).

Fo

clk: eyeq: add driver

Add Mobileye EyeQ5, EyeQ6L and EyeQ6H clock controller driver. It is
both a platform driver and a hook onto of_clk_init() used for clocks
required early (GIC timer, UARTs).

For some compatible, it is both at the same time. eqc_early_init()
initialises early PLLs and exposes its own clock provider. It marks
other clocks as deferred. eqc_probe() adds all remaining clocks using
another clock provider.

It exposes read-only PLLs derived from the main crystal on board.
It also exposes another type of clocks: divider clocks.
They always have even divisors and have one PLL as parent.

This driver also bears the responsability for optional reset and pinctrl
auxiliary devices. The match data attached to the devicetree node
compatible indicate if such devices should be created. They all get
passed a pointer to the start of the OLB region.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241023-mbly-clk-v6-1-ca83e43daf93@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...