Merge branch 'next' into for-linus

Prepare input updates for 6.7 merge window.

Merge tag 'v6.5' into next

Sync up with mainline to bring in updates to the shared infrastructure.

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

ASoC: Merge v6.5-rc2

Get a similar baseline to my other branches, and fixes for people using
the branch.

Merge v6.5-rc1 into drm-misc-fixes

Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull more clk updates from Stephen Boyd:
"Another set of clk driver updates and fixes for the merge window. The

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull more clk updates from Stephen Boyd:
"Another set of clk driver updates and fixes for the merge window. The
driver updates needed more time to bake in linux-next.

Updates:
- Support for more clk controllers in Qualcomm SoCs such as SM8350,
SM8450, SDX75, SC8280XP, and IPQ9574
- Runtime PM enablement of some more Qualcomm clk controllers
- Various fixes to Qualcomm clk driver data to use correct clk_ops
and to check halt bits properly
- AT91 updates to modernize with clk_parent_data structures

Fixes:
- Remove 'syscon' from dt binding fix for ti,j721e-system-controller
- Fix determine rate in the Tegra driver that got wrecked by the
refactorting of muxes this merge window"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
clk: tegra: Avoid calling an uninitialized function
dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
...

show more ...

Merge branch 'master' into mm-hotfixes-stable

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This batch of clk driver updates contains almost no new SoC support.
Inst

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This batch of clk driver updates contains almost no new SoC support.
Instead there's a treewide patch series from Maxime that makes
clk_ops::determine_rate mandatory for muxes.

Beyond that core framework change we have the usual pile of clk driver
updates such as migrating i2c drivers to use .probe() again or
YAMLfication of clk DT bindings so we can validate DTBs.

Overall the SoCs that got the most updates this time around in terms
of diffstat are the Amlogic and Mediatek drivers because they added
new SoC support or fixed up various drivers to have proper data.

In general things look kinda quiet. I suspect the core framework
change may still shake out some problems after the merge window,
mostly because not everyone tests linux-next where that series has
been for some number of weeks. I saw that there's at least one pending
fix for Tegra that needs to be wrapped up into a proper patch. I'll
try to catch those bits before the window closes so that -rc1 is
bootable. More details below.

Core:
- Make clk_ops::determine_rate mandatory for muxes

New Drivers:
- Add amlogic a1 SoC family PLL and peripheral clock controller support

Updates:
- Handle allocation failures from kasprintf() and friends
- Migrate platform clk drivers to .remove_new()
- Migrate i2c clk drivers to .probe() instead of .probe_new()
- Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
- Add infra_ao reset support for Mediatek MT8188 SoCs
- Align driver_data to i2c_device_id tables in some i2c clk drivers
- Use device_get_match_data() in vc5 clk driver
- New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip
FPGA clock drivers
- Use of_property_read_bool() to read "microchip,pic32mzda-sosc"
boolean DT property in clk-pic32mzda
- Convert AT91 clock dt-bindings to YAML
- Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
- Keep i.MX UART clocks enabled during kernel boot if earlycon is set
- Drop imx_unregister_clocks() as there are no users anymore
- Switch to _safe iterator on imx_clk_scu_unregister() to avoid use
after free
- Add determine_rate op to the imx8m composite clock
- Use device managed API for iomap and kzalloc for i.MXRT1050,
i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
- Add missing interrupt DT property for the i.MX8M clock controller
- Re-add support for Exynos4212 clock controller because we are
re-introducing the SoC in the mainline
- Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve
some objtool warnings
- Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
- Convert the Renesas clock drivers to readl_poll_timeout_atomic()
- Add PWM clock on Renesas R-Car V3U
- Fix PLL5 on Renesas RZ/G2L and RZ/V2L"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits)
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
...

show more ...

Merge branches 'clk-qcom' and 'clk-microchip' into clk-next

* clk-qcom: (63 commits)
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974:

Merge branches 'clk-qcom' and 'clk-microchip' into clk-next

* clk-qcom: (63 commits)
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
clk: qcom: gcc-ipq6018: remove duplicate initializers
clk: qcom: gcc-ipq9574: Enable crypto clocks
dt-bindings: clock: Add crypto clock and reset definitions
clk: qcom: Add lpass audio clock controller driver for SC8280XP
clk: qcom: Add lpass clock controller driver for SC8280XP
dt-bindings: clock: Add LPASS AUDIOCC and reset controller for SC8280XP
dt-bindings: clock: Add LPASSCC and reset controller for SC8280XP
dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226
clk: qcom: gpucc-sm8550: Add support for graphics clock controller
clk: qcom: Add support for SM8450 GPUCC
clk: qcom: gcc-sm8450: Enable hw_clk_ctrl
clk: qcom: rcg2: Make hw_clk_ctrl toggleable
dt-bindings: clock: qcom: Add SM8550 graphics clock controller
...

* clk-microchip:
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw

show more ...

Merge tag 'clk-microchip-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-microchip

Pull Microchip clk driver updates from Claudiu Beznea:

It contains support for paren

Merge tag 'clk-microchip-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-microchip

Pull Microchip clk driver updates from Claudiu Beznea:

It contains support for parent_data, parent_hw in AT91 clock drivers
used by SAMA7G5 SoC (e.g. main, master, generic, peripheral, programmable,
system, utmi, slow clocks) and also the update of SAMA7G5 to use
this new support.

* tag 'clk-microchip-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw

show more ...

Merge branches 'clk-renesas', 'clk-determine-rate', 'clk-allwinner', 'clk-samsung' and 'clk-amlogic' into clk-next

- Make clk_ops::determine_rate mandatory for muxes

* clk-renesas:
clk: renesas:

Merge branches 'clk-renesas', 'clk-determine-rate', 'clk-allwinner', 'clk-samsung' and 'clk-amlogic' into clk-next

- Make clk_ops::determine_rate mandatory for muxes

* clk-renesas:
clk: renesas: rzg2l: Convert to readl_poll_timeout_atomic()
clk: renesas: mstp: Convert to readl_poll_timeout_atomic()
clk: renesas: cpg-mssr: Convert to readl_poll_timeout_atomic()
iopoll: Do not use timekeeping in read_poll_timeout_atomic()
iopoll: Call cpu_relax() in busy loops
clk: renesas: rzg2l: Fix CPG_SIPLL5_CLK1 register write
clk: renesas: r8a779a0: Add PWM clock

* clk-determine-rate: (71 commits)
clk: sprd: composite: Simplify determine_rate implementation
ASoC: tlv320aic32x4: pll: Remove impossible condition in clk_aic32x4_pll_determine_rate()
clk: Fix best_parent_rate after moving code into a separate function
clk: Forbid to register a mux without determine_rate
ASoC: tlv320aic32x4: div: Switch to determine_rate
ASoC: tlv320aic32x4: pll: Switch to determine_rate
clk: tegra: super: Switch to determine_rate
clk: tegra: periph: Switch to determine_rate
clk: stm32: composite: Switch to determine_rate
clk: st: flexgen: Switch to determine_rate
clk: sprd: composite: Switch to determine_rate
clk: ingenic: tcu: Switch to determine_rate
clk: ingenic: cgu: Switch to determine_rate
clk: imx: scu: Switch to determine_rate
clk: da8xx: clk48: Switch to determine_rate
clk: si5351: clkout: Switch to determine_rate
clk: si5351: msynth: Switch to determine_rate
clk: si5351: pll: Switch to determine_rate
clk: si5341: Switch to determine_rate
clk: cdce706: clkout: Switch to determine_rate
...

* clk-allwinner:
clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux

* clk-samsung:
clk: samsung: add CONFIG_OF dependency
clk: samsung: Re-add support for Exynos4212 CPU clock
clk: samsung: Add Exynos4212 compatible to CLKOUT driver
dt-bindings: clock: samsung,exynos: add Exynos4212 clock compatible

* clk-amlogic:
MAINTAINERS: repair pattern in ARM/Amlogic Meson SoC CLOCK FRAMEWORK
clk: meson: pll: remove unneeded semicolon
clk: meson: a1: Staticize rtc clk
clk: meson: a1: add Amlogic A1 Peripherals clock controller driver
clk: meson: a1: add Amlogic A1 PLL clock controller driver
clk: meson: introduce new pll power-on sequence for A1 SoC family
clk: meson: make pll rst bit as optional
dt-bindings: clock: meson: add A1 Peripherals clock controller bindings
dt-bindings: clock: meson: add A1 PLL clock controller bindings

show more ...

clk: at91: clk-main: add support for parent_data/parent_hw

Add support for parent_data and parent_hw in main oscillator clock drivers.
With this parent-child relations are described with pointers ra

clk: at91: clk-main: add support for parent_data/parent_hw

Add support for parent_data and parent_hw in main oscillator clock drivers.
With this parent-child relations are described with pointers rather
than strings making registration a bit faster.

All the SoC based drivers that rely on clk-main were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-2-claudiu.beznea@microchip.com

show more ...

clk: at91: main: Add a determine_rate hook

The SAM9x5 main clock implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.

This is a bit odd, since set_parent()

clk: at91: main: Add a determine_rate hook

The SAM9x5 main clock implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.

This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidates to
trigger that parent change are either the assigned-clock-parents device
tree property or a call to clk_set_rate(), with determine_rate()
figuring out which parent is the best suited for a given rate.

The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.

Similarly, it doesn't look like the device tree using that clock driver
uses any of the assigned-clock properties on that clock.

So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().

The latter case would be equivalent to setting the determine_rate
implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no
determine_rate implementation is provided, clk_round_rate() (through
clk_core_round_rate_nolock()) will call itself on the parent if
CLK_SET_RATE_PARENT is set, and will not change the clock rate
otherwise.

And if it was an oversight, then we are at least explicit about our
behavior now and it can be further refined down the line.

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-9-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.17-rc4' into for-linus

Merge with mainline to get the Intel ASoC generic helpers header and
other changes.

Merge tag 'v5.16' into next

Sync up with mainline to bring in the latest API changes.

Merge branch 'for-next' into for-linus

Pull 5.17 materials.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to bring drm-misc-next-fixes up to the latest state for
the current release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Sync up with drm-next to get v5.16-rc2.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Thomas needs the dma_resv_for_each_fence API for i915/ttm async migration
work.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging from drm/drm-next for v5.16-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

We need -rc1 to address a breakage in drm/scheduler affecting panfrost.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>