History log of /linux/arch/xtensa/boot/Makefile (Results 1 – 23 of 23)
Revision Date Author Comments
# 0d4d70da 10-Oct-2026 Kees Cook <kees@kernel.org>

kbuild: Mark the gzip recipes as recursive

Since commit 48ebe1cbbeb51 ("kbuild: compress the kernel with pigz if
available"), cmd_gzip runs pigz through scripts/jobserver-exec, which
takes the job s

kbuild: Mark the gzip recipes as recursive

Since commit 48ebe1cbbeb51 ("kbuild: compress the kernel with pigz if
available"), cmd_gzip runs pigz through scripts/jobserver-exec, which
takes the job slots make has free. GNU Make passes the jobserver pipe
only to recipes it treats as recursive, but leaves --jobserver-auth in
MAKEFLAGS for all of them. The make 4.3 in CentOS Stream 9 also hides
the pipe in sub-makes (a backport of the fix for GNU Make bug 58232), so
jobserver-exec cannot open it, runs pigz on one thread, and prints:

WARNING: Unable to reopen jobserver read-side pipe: FileNotFoundError(2, 'No such file or directory')

Mark every recipe that can run cmd_gzip as recursive with "+", as
commit ecab4115c44cc ("kbuild: mark `rustc` (and others) invocations as
recursive") did for rustc. Besides the $(call if_changed,gzip) rules,
this covers those that choose gzip through a variable: the built-in
initramfs in usr/Makefile (which rcutorture's kvm.sh builds), the EFI
zboot image, and the arm, csky, and mips compressed images. As with
rustc, "make -n" now runs these recipes, including those that choose
through a variable when they select another compressor. Also update the
gzip entry in Documentation/kbuild/makefiles.rst, as suggested in
review.

Tested with GNU Make 4.3 plus CentOS Stream 9's make-4.3-cloexec.patch,
GCC 16.2.0, and -j64, on ARCH=x86_64, arm64, and arm defconfig, and
ARCH=x86_64 defconfig with a built-in initramfs: none of them prints the
warning, and pigz gets the free job slots (-p 54, 64, and 50 for the
kernel image). Without this change, the x86_64 builds print it for the
kernel image and for the initramfs.

Reported-by: Paul E. McKenney <paulmck@kernel.org>
Closes: https://lore.kernel.org/all/0ddb5e5e-f801-444c-aa98-0cfe814a3026@paulmck-laptop/
Fixes: 48ebe1cbbeb51 ("kbuild: compress the kernel with pigz if available")
Assisted-by: LLM
Reviewed-by: Nicolas Schier <n.schier@fritz.com>
Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://patch.msgid.link/20261010081914.540611-1-kees@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>

show more ...


# 54d3d7d3 20-Sep-2023 Randy Dunlap <rdunlap@infradead.org>

xtensa: boot: don't add include-dirs

Drop the -I<include-dir> options to prevent build warnings since there
is not boot/include directory:

cc1: warning: arch/xtensa/boot/include: No such file or di

xtensa: boot: don't add include-dirs

Drop the -I<include-dir> options to prevent build warnings since there
is not boot/include directory:

cc1: warning: arch/xtensa/boot/include: No such file or directory [-Wmissing-include-dirs]

Fixes: 437374e9a950 ("restore arch/{ppc/xtensa}/boot cflags")
Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230920052139.10570-15-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...


# c425c546 13-Mar-2021 Masahiro Yamada <masahiroy@kernel.org>

xtensa: move CONFIG_CPU_*_ENDIAN defines to Kconfig

Move the definition of CONFIG_CPU_*_ENDIAN to Kconfig, the best place
for CONFIG options.

I slightly simplified the test code. You can use the -P

xtensa: move CONFIG_CPU_*_ENDIAN defines to Kconfig

Move the definition of CONFIG_CPU_*_ENDIAN to Kconfig, the best place
for CONFIG options.

I slightly simplified the test code. You can use the -P option to suppress
linemarker generation. The grep command is unneeded.

$ echo __XTENSA_EB__ | xtensa-linux-gcc -E -
# 1 "<stdin>"
# 1 "<built-in>"
# 1 "<command-line>"
# 1 "<stdin>"
1

$ echo __XTENSA_EB__ | xtensa-linux-gcc -E -P -
1

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Message-Id: <20210313122342.69995-1-masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...


# 7424d9fa 22-Jul-2020 Max Filippov <jcmvbkbc@gmail.com>

xtensa: add uImage and xipImage to targets

uImage and xipImage are always rebuilt in the xtensa kernel build
process. Add them to 'targets' to avoid that.

Reviewed-by: Masahiro Yamada <masahiroy@ke

xtensa: add uImage and xipImage to targets

uImage and xipImage are always rebuilt in the xtensa kernel build
process. Add them to 'targets' to avoid that.

Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...


# 65898b37 22-Jul-2020 Max Filippov <jcmvbkbc@gmail.com>

xtensa: move vmlinux.bin[.gz] to boot subdirectory

vmlinux.bin and vmlinux.bin.gz are always rebuilt in the kernel build
process. Add them to 'targets' and move them to the boot subdirectory
where t

xtensa: move vmlinux.bin[.gz] to boot subdirectory

vmlinux.bin and vmlinux.bin.gz are always rebuilt in the kernel build
process. Add them to 'targets' and move them to the boot subdirectory
where their rules are. Update make rules that refer to them.

Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...


# 44d92b2c 10-Mar-2020 Masahiro Yamada <masahiroy@kernel.org>

xtensa: remove meaningless export ccflags-y

arch/xtensa/boot/Makefile does not define ccflags-y at all.

Please do not export ccflags-y because it is meant to be effective
only in the current Makefi

xtensa: remove meaningless export ccflags-y

arch/xtensa/boot/Makefile does not define ccflags-y at all.

Please do not export ccflags-y because it is meant to be effective
only in the current Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Message-Id: <20200310045925.25396-1-masahiroy@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...


# 7af710d9 04-Jan-2017 Max Filippov <jcmvbkbc@gmail.com>

xtensa: add XIP kernel support

XIP (eXecute In Place) kernel image is the image that can be run
directly from ROM, using RAM only for writable data.

XIP xtensa kernel differs from regular xtensa ke

xtensa: add XIP kernel support

XIP (eXecute In Place) kernel image is the image that can be run
directly from ROM, using RAM only for writable data.

XIP xtensa kernel differs from regular xtensa kernel in the following
ways:
- it has exception/IRQ vectors merged into text section. No vectors
relocation takes place at kernel startup.
- .data/.bss location must be specified in the kernel configuration,
its content is copied there in the _startup function.
- .init.text is merged with the rest of text and is executed from ROM.
- when MMU is used the virtual address where the kernel will be mapped
must be specified in the kernel configuration. It may be in the KSEG
or in the KIO, __pa macro is adjusted to be able to handle both.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...


# 4119ba21 30-Oct-2018 Max Filippov <jcmvbkbc@gmail.com>

xtensa: add NOTES section to the linker script

This section collects all source .note.* sections together in the
vmlinux image. Without it .note.Linux section may be placed at address
0, while the r

xtensa: add NOTES section to the linker script

This section collects all source .note.* sections together in the
vmlinux image. Without it .note.Linux section may be placed at address
0, while the rest of the kernel is at its normal address, resulting in a
huge vmlinux.bin image that may not be linked into the xtensa Image.elf.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...


# d6c6ab93 09-Aug-2018 Masahiro Yamada <yamada.masahiro@socionext.com>

kbuild: remove deprecated host-progs variable

The host-progs has been kept as an alias of hostprogs-y for a long time
(at least since the beginning of Git era), with the clear prompt:
Usage of hos

kbuild: remove deprecated host-progs variable

The host-progs has been kept as an alias of hostprogs-y for a long time
(at least since the beginning of Git era), with the clear prompt:
Usage of host-progs is deprecated. Please replace with hostprogs-y!

Enough time for the migration has passed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...


# 9a736fcb 25-Dec-2016 Max Filippov <jcmvbkbc@gmail.com>

xtensa: clean up bootable image build targets

Currently xtensa uses 'zImage' as a synonym of 'all', but in fact xtensa
supports three targets: 'Image' (ELF image with reset vector), 'zImage'
(compre

xtensa: clean up bootable image build targets

Currently xtensa uses 'zImage' as a synonym of 'all', but in fact xtensa
supports three targets: 'Image' (ELF image with reset vector), 'zImage'
(compressed redboot image) and 'uImage' (U-Boot image).
Provide separate 'Image', 'zImage' and 'uImage' make targets that only
build corresponding image type. Make 'all' build all images appropriate
for a platform.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

show more ...


# 123f15e6 22-Aug-2013 Max Filippov <jcmvbkbc@gmail.com>

xtensa: don't use echo -e needlessly

-e is not needed to output strings without escape sequences. This breaks
big endian FSF build when the shell is dash, because its builtin echo
doesn't understand

xtensa: don't use echo -e needlessly

-e is not needed to output strings without escape sequences. This breaks
big endian FSF build when the shell is dash, because its builtin echo
doesn't understand '-e' switch and outputs it in the echoed string.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

show more ...


# 2a02bc16 02-Jan-2013 Stephen Warren <swarren@nvidia.com>

xtensa: use new common dtc rule

The current rules have the .dtb files build in a different directory
from the .dts files. This patch changes xtensa to use the generic dtb
rule which builds .dtb file

xtensa: use new common dtc rule

The current rules have the .dtb files build in a different directory
from the .dts files. This patch changes xtensa to use the generic dtb
rule which builds .dtb files in the same directory as the source .dts.

This requires moving parts of arch/xtensa/boot/Makefile into newly
created arch/xtensa/boot/dts/Makefile, and updating arch/xtensa/Makefile
to call the new Makefile.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

show more ...


# 055d4db1 10-Dec-2012 Max Filippov <jcmvbkbc@gmail.com>

xtensa: don't try to build DTB when OF is disabled

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>


# 0d456bad 05-Nov-2012 Max Filippov <jcmvbkbc@gmail.com>

xtensa: add support for the XTFPGA boards

The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with
an Xtensa processor and an OpenCores Ethernet device.

Signed-off-by: Chris Za

xtensa: add support for the XTFPGA boards

The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with
an Xtensa processor and an OpenCores Ethernet device.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

show more ...


# da844a81 03-Nov-2012 Max Filippov <jcmvbkbc@gmail.com>

xtensa: add device trees support

Device trees allow specification of hardware topology and device
parameters at runtime instead of hard-coding them in platform setup
code. This allows running single

xtensa: add device trees support

Device trees allow specification of hardware topology and device
parameters at runtime instead of hard-coding them in platform setup
code. This allows running single binary kernel on a range of compatible
boards.

New boot parameters tag BP_TAG_FDT is allocated and a pointer to flat
device tree is passed in it.

Note that current interrupt mapping scheme uses single cell for
interrupt identification. That means that IRQ numbers used in DTS must
be CPU internal IRQ numbers, not external. It is possible to extend
interrupt identification to two cells, and use second cell to tell
external IRQ numbers form internal. That would allow to use single DTS
on multiple boards with different mapping of external IRQ numbers.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

show more ...


# 0322cabd 05-Nov-2012 Max Filippov <jcmvbkbc@gmail.com>

xtensa: add U-Boot image support (uImage).

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>


# 3f5ec298 05-Nov-2012 Max Filippov <jcmvbkbc@gmail.com>

xtensa: clean up boot make rules

- remove duplicate rules for binary and packed image
- use predefined macros for ld/objcopy/gzip
- remove build-id section from bootable elf image

Signed-off-by: Ma

xtensa: clean up boot make rules

- remove duplicate rules for binary and packed image
- use predefined macros for ld/objcopy/gzip
- remove build-id section from bootable elf image

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

show more ...


# 9ad79b58 17-Sep-2012 Max Filippov <jcmvbkbc@gmail.com>

xtensa: drop CONFIG_EMBEDDED_RAMDISK

Remove Kconfig entries, boot subdirectory, dependencies from other
boot-* Makefiles, and sections from ld scripts.

Remove stale redboot code that used to pass i

xtensa: drop CONFIG_EMBEDDED_RAMDISK

Remove Kconfig entries, boot subdirectory, dependencies from other
boot-* Makefiles, and sections from ld scripts.

Remove stale redboot code that used to pass initrd addresses in a3 and
a4 to _start.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

show more ...


# 3996eabb 14-Jan-2011 matt mooney <mfm@muteddisk.com>

xtensa: change to new flag variable

Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <m

xtensa: change to new flag variable

Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

show more ...


# 437374e9 20-Oct-2007 Milton Miller <miltonm@bga.com>

kbuild: restore arch/{ppc/xtensa}/boot cflags

Commit 9a39e273d4df0560c724c5fe71f6314a0583ca2b removed the boot directory
addition to CFLAGS that was being used by the subdirectory builds. For the
o

kbuild: restore arch/{ppc/xtensa}/boot cflags

Commit 9a39e273d4df0560c724c5fe71f6314a0583ca2b removed the boot directory
addition to CFLAGS that was being used by the subdirectory builds. For the
other files, that patch set EXTRA_CFLAGS, but Makefile.build explicitly
sets that to empty as it is explicitly for a single directory only.
Append to KBUILD_CFLAGS instead.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

show more ...


# 9a39e273 14-Oct-2007 Sam Ravnborg <sam@neptun.(none)>

kbuild: fix up CFLAGS usage

Only in very rare cases is it needed to change CFLAGS
outside of arch/*/Makefile.
Fix up all wrong cases - in most cases
the use of EXTRA_CFLAGS is the only thing needed.

kbuild: fix up CFLAGS usage

Only in very rare cases is it needed to change CFLAGS
outside of arch/*/Makefile.
Fix up all wrong cases - in most cases
the use of EXTRA_CFLAGS is the only thing needed.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

show more ...


# e7d163f7 30-Jun-2005 Chris Zankel <czankel@tensilica.com>

[PATCH] xtensa: Removed local copy of zlib and fixed O= support

Removed an unnecessary local copy of zlib (sorry for the add'l traffic).
Fixed 'O=' support (thanks to Jan Dittmer for pointing it out

[PATCH] xtensa: Removed local copy of zlib and fixed O= support

Removed an unnecessary local copy of zlib (sorry for the add'l traffic).
Fixed 'O=' support (thanks to Jan Dittmer for pointing it out). Some minor
clean-ups in the make files.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

show more ...


# 4bedea94 24-Jun-2005 Chris Zankel <czankel@tensilica.com>

[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 2

The attached patches provides part 2 of an architecture implementation for the
Tensilica Xtensa CPU series.

Signed-off-by: Chris Zan

[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 2

The attached patches provides part 2 of an architecture implementation for the
Tensilica Xtensa CPU series.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

show more ...