History log of /linux/arch/x86/kvm/Makefile (Results 1 – 25 of 745)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
# f4b369c6 20-Apr-2026 Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.


Revision tags: v7.0, v7.0-rc7, v7.0-rc6, v7.0-rc5, v7.0-rc4
# 0421ccdf 12-Mar-2026 Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.


# 3e9e952b 20-Apr-2026 Petr Mladek <pmladek@suse.com>

Merge branch 'for-7.1-printf-kunit-build' into for-linus


# 42d3b66d 12-Mar-2026 Matthew Brost <matthew.brost@intel.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 7.00-rc3. Important ahead GPU SVM merging THP
support.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>


Revision tags: v7.0-rc3, v7.0-rc2
# f09812b8 25-Feb-2026 Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.0-rc1 which contains a few treewide changes affecting i915.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>


# 8b85987d 23-Feb-2026 Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-misc-next

Let's merge 7.0-rc1 to start the new drm-misc-next window

Signed-off-by: Maxime Ripard <mripard@kernel.org>


# c17ee635 23-Feb-2026 Maxime Ripard <mripard@kernel.org>

Merge drm/drm-fixes into drm-misc-fixes

7.0-rc1 was just released, let's merge it to kick the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>


Revision tags: v7.0-rc1
# cb557386 13-Feb-2026 Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
"Loongarch:

- Add more CPUCFG mask bits

- Improve feature detection

- Add lazy lo

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
"Loongarch:

- Add more CPUCFG mask bits

- Improve feature detection

- Add lazy load support for FPU and binary translation (LBT) register
state

- Fix return value for memory reads from and writes to in-kernel
devices

- Add support for detecting preemption from within a guest

- Add KVM steal time test case to tools/selftests

ARM:

- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception

- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process

- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers

- More pKVM fixes for features that are not supposed to be exposed to
guests

- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor

- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding

- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest

- Preliminary work for guest GICv5 support

- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures

- A small set of FPSIMD cleanups

- Selftest fixes addressing the incorrect alignment of page
allocation

- Other assorted low-impact fixes and spelling fixes

RISC-V:

- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()

- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM

- Transparent huge page support for hypervisor page tables

- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables

- Add RISC-V specific paging modes to KVM selftests

- Detect paging mode at runtime for selftests

s390:

- Performance improvement for vSIE (aka nested virtualization)

- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host

- Maintainership change for s390 vfio-pci

- Small quality of life improvement for protected guests

x86:

- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).

KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.

For more information, see the commit message for merge commit
bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...")

- Disallow changing the virtual CPU model if L2 is active, for all
the same reasons KVM disallows change the model after the first
KVM_RUN

- Fix a bug where KVM would incorrectly reject host accesses to PV
MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
even if those were advertised as supported to userspace,

- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
where KVM would attempt to read CR3 configuring an async #PF entry

- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
(for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
Only a few exports that are intended for external usage, and those
are allowed explicitly

- When checking nested events after a vCPU is unblocked, ignore
-EBUSY instead of WARNing. Userspace can sometimes put the vCPU
into what should be an impossible state, and spurious exit to
userspace on -EBUSY does not really do anything to solve the issue

- Also throw in the towel and drop the WARN on INIT/SIPI being
blocked when vCPU is in Wait-For-SIPI, which also resulted in
playing whack-a-mole with syzkaller stuffing architecturally
impossible states into KVM

- Add support for new Intel instructions that don't require anything
beyond enumerating feature flags to userspace

- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2

- Add WARNs to guard against modifying KVM's CPU caps outside of the
intended setup flow, as nested VMX in particular is sensitive to
unexpected changes in KVM's golden configuration

- Add a quirk to allow userspace to opt-in to actually suppress EOI
broadcasts when the suppression feature is enabled by the guest
(currently limited to split IRQCHIP, i.e. userspace I/O APIC).
Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
option as some userspaces have come to rely on KVM's buggy behavior
(KVM advertises Supress EOI Broadcast irrespective of whether or
not userspace I/O APIC supports Directed EOIs)

- Clean up KVM's handling of marking mapped vCPU pages dirty

- Drop a pile of *ancient* sanity checks hidden behind in KVM's
unused ASSERT() macro, most of which could be trivially triggered
by the guest and/or user, and all of which were useless

- Fold "struct dest_map" into its sole user, "struct rtc_status", to
make it more obvious what the weird parameter is used for, and to
allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n

- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y

- Add a regression test for recent APICv update fixes

- Handle "hardware APIC ISR", a.k.a. SVI, updates in
kvm_apic_update_apicv() to consolidate the updates, and to
co-locate SVI updates with the updates for KVM's own cache of ISR
information

- Drop a dead function declaration

- Minor cleanups

x86 (Intel):

- Rework KVM's handling of VMCS updates while L2 is active to
temporarily switch to vmcs01 instead of deferring the update until
the next nested VM-Exit.

The deferred updates approach directly contributed to several bugs,
was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans

- Fix an SGX bug where KVM would incorrectly try to handle EPCM page
faults, and instead always reflect them into the guest. Since KVM
doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
interference and can't be resolved by KVM

- Fix a bug where KVM would register its posted interrupt wakeup
handler even if loading kvm-intel.ko ultimately failed

- Disallow access to vmcb12 fields that aren't fully supported,
mostly to avoid weirdness and complexity for FRED and other
features, where KVM wants enable VMCS shadowing for fields that
conditionally exist

- Print out the "bad" offsets and values if kvm-intel.ko refuses to
load (or refuses to online a CPU) due to a VMCS config mismatch

x86 (AMD):

- Drop a user-triggerable WARN on nested_svm_load_cr3() failure

- Add support for virtualizing ERAPS. Note, correct virtualization of
ERAPS relies on an upcoming, publicly announced change in the APM
to reduce the set of conditions where hardware (i.e. KVM) *must*
flush the RAP

- Ignore nSVM intercepts for instructions that are not supported
according to L1's virtual CPU model

- Add support for expedited writes to the fast MMIO bus, a la VMX's
fastpath for EPT Misconfig

- Don't set GIF when clearing EFER.SVME, as GIF exists independently
of SVM, and allow userspace to restore nested state with GIF=0

- Treat exit_code as an unsigned 64-bit value through all of KVM

- Add support for fetching SNP certificates from userspace

- Fix a bug where KVM would use vmcb02 instead of vmcb01 when
emulating VMLOAD or VMSAVE on behalf of L2

- Misc fixes and cleanups

x86 selftests:

- Add a regression test for TPR<=>CR8 synchronization and IRQ masking

- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
support, and extend x86's infrastructure to support EPT and NPT
(for L2 guests)

- Extend several nested VMX tests to also cover nested SVM

- Add a selftest for nested VMLOAD/VMSAVE

- Rework the nested dirty log test, originally added as a regression
test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
improve test coverage and to hopefully make the test easier to
understand and maintain

guest_memfd:

- Remove kvm_gmem_populate()'s preparation tracking and half-baked
hugepage handling. SEV/SNP was the only user of the tracking and it
can do it via the RMP

- Retroactively document and enforce (for SNP) that
KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
source page to be 4KiB aligned, to avoid non-trivial complexity for
something that no known VMM seems to be doing and to avoid an API
special case for in-place conversion, which simply can't support
unaligned sources

- When populating guest_memfd memory, GUP the source page in common
code and pass the refcounted page to the vendor callback, instead
of letting vendor code do the heavy lifting. Doing so avoids a
looming deadlock bug with in-place due an AB-BA conflict betwee
mmap_lock and guest_memfd's filemap invalidate lock

Generic:

- Fix a bug where KVM would ignore the vCPU's selected address space
when creating a vCPU-specific mapping of guest memory. Actually
this bug could not be hit even on x86, the only architecture with
multiple address spaces, but it's a bug nevertheless"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
KVM: s390: Increase permitted SE header size to 1 MiB
MAINTAINERS: Replace backup for s390 vfio-pci
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
KVM: s390: vsie: Fix race in walk_guest_tables()
KVM: s390: Use guest address to mark guest page dirty
irqchip/riscv-imsic: Adjust the number of available guest irq files
RISC-V: KVM: Transparent huge page support
RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
RISC-V: KVM: Allow Zalasr extensions for Guest/VM
KVM: riscv: selftests: Add riscv vm satp modes
KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
RISC-V: KVM: Remove unnecessary 'ret' assignment
KVM: s390: Add explicit padding to struct kvm_s390_keyop
KVM: LoongArch: selftests: Add steal time test case
LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
LoongArch: KVM: Add paravirt preempt feature in hypervisor side
...

show more ...


# 9e03b7ca 09-Feb-2026 Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-x86-misc-6.20' of https://github.com/kvm-x86/linux into HEAD

KVM x86 misc changes for 6.20

- Disallow changing the virtual CPU model if L2 is active, for all the same
reasons KVM

Merge tag 'kvm-x86-misc-6.20' of https://github.com/kvm-x86/linux into HEAD

KVM x86 misc changes for 6.20

- Disallow changing the virtual CPU model if L2 is active, for all the same
reasons KVM disallows change the model after the first KVM_RUN.

- Fix a bug where KVM would incorrectly reject host accesses to PV MSRs that
were advertised as supported to userspace when running with
KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled.

- Fix a bug where KVM would attempt to read protect guest state (CR3) when
configuring an async #PF entry.

- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM (for x86
only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL. Explicitly allow
the few exports that are intended for external usage.

- Ignore -EBUSY when checking nested events after a vCPU exits blocking as
the WARN is user-triggerable, and because exiting to userspace on -EBUSY
does more harm than good in pretty much every situation.

- Throw in the towel and drop the WARN on INIT/SIPI being blocked when vCPU is
in Wait-For-SIPI, as playing whack-a-mole with syzkaller turned out to be an
unwinnable game.

- Add support for new Intel instructions that don't require anything beyond
enumerating feature flags to userspace.

- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2.

- Add WARNs to guard against modifying KVM's CPU caps outside of the intended
setup flow, as nested VMX in particular is sensitive to unexpected changes
in KVM's golden configuration.

- Add a quirk to allow userspace to opt-in to actually suppress EOI broadcasts
when the suppression feature is enabled by the guest (currently limited to
split IRQCHIP, i.e. userspace I/O APIC). Sadly, simply fixing KVM to honor
Suppress EOI Broadcasts isn't an option as some userspaces have come to rely
on KVM's buggy behavior (KVM advertises Supress EOI Broadcast irrespective
of whether or not userspace I/O APIC supports Directed EOIs).

- Minor cleanups.

show more ...


Revision tags: v6.19, v6.19-rc8, v6.19-rc7, v6.19-rc6, v6.19-rc5, v6.19-rc4, v6.19-rc3, v6.19-rc2, v6.19-rc1, v6.18, v6.18-rc7
# fc4d3a65 21-Nov-2025 Sean Christopherson <seanjc@google.com>

KVM: x86: Enforce use of EXPORT_SYMBOL_FOR_KVM_INTERNAL

Add a (gnarly) inline "script" in the Makefile to fail the build if there
is EXPORT_SYMBOL_GPL or EXPORT_SYMBOL usage in virt/kvm or arch/x86/

KVM: x86: Enforce use of EXPORT_SYMBOL_FOR_KVM_INTERNAL

Add a (gnarly) inline "script" in the Makefile to fail the build if there
is EXPORT_SYMBOL_GPL or EXPORT_SYMBOL usage in virt/kvm or arch/x86/kvm
beyond the known-good/expected exports for other modules. Remembering to
use EXPORT_SYMBOL_FOR_KVM_INTERNAL is surprisingly difficult, and hoping
to detect "bad" exports via code review is not a robust long-term strategy.

Jump through a pile of hoops to coerce make into printing a human-friendly
error message, with the offending files+lines cleanly separated.

E.g. where <srctree> is the resolution of $(srctree), i.e. '.' for in-tree
builds, and the absolute path for out-of-tree-builds:

<srctree>/arch/x86/kvm/Makefile:97: *** ERROR ***
found 2 unwanted occurrences of EXPORT_SYMBOL_GPL:
<srctree>/arch/x86/kvm/x86.c:686:EXPORT_SYMBOL_GPL(__kvm_set_user_return_msr);
<srctree>/arch/x86/kvm/x86.c:703:EXPORT_SYMBOL_GPL(kvm_set_user_return_msr);
in directories:
<srctree>/arch/x86/kvm
<srctree>/virt/kvm
Use EXPORT_SYMBOL_FOR_KVM_INTERNAL, not EXPORT_SYMBOL_GPL. Stop.

and

<srctree>/arch/x86/kvm/Makefile:98: *** ERROR ***
found 1 unwanted occurrences of EXPORT_SYMBOL:
<srctree>/arch/x86/kvm/x86.c:709:EXPORT_SYMBOL(kvm_get_user_return_msr);
in directories:
<srctree>/arch/x86/kvm
<srctree>/virt/kvm
Use EXPORT_SYMBOL_FOR_KVM_INTERNAL, not EXPORT_SYMBOL. Stop.

Put the enforcement in x86's Makefile even though the rule itself applies
to virt/kvm, as putting the enforcement in virt/kvm/Makefile.kvm would
effectively require exempting every architecture except x86. PPC is the
only other architecture with sub-modules, and PPC hasn't been switched to
use EXPORT_SYMBOL_FOR_KVM_INTERNAL (and given its nearly-orphaned state,
likely never will). And for KVM architectures without sub-modules, that
means that, barring truly spurious exports, the exports are intended for
non-KVM usage and thus shouldn't be using EXPORT_SYMBOL_FOR_KVM_INTERNAL.

Tested-by: Chao Gao <chao.gao@intel.com>
Link: https://patch.msgid.link/20251121190514.293385-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>

show more ...


Revision tags: v6.18-rc6, v6.18-rc5, v6.18-rc4
# cb9f145f 01-Nov-2025 Rob Clark <robin.clark@oss.qualcomm.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>


Revision tags: v6.18-rc3, v6.18-rc2, v6.18-rc1, v6.17, v6.17-rc7
# f088104d 16-Sep-2025 Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are f

Merge drm/drm-next into drm-intel-gt-next

Backmerge in order to get the commit:

048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")

To drm-intel-gt-next as there are followup fixes to be applied.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...


Revision tags: v6.17-rc6, v6.17-rc5, v6.17-rc4, v6.17-rc3, v6.17-rc2, v6.17-rc1
# a53d0cf7 05-Aug-2025 Ingo Molnar <mingo@kernel.org>

Merge commit 'linus' into core/bugs, to resolve conflicts

Resolve conflicts with this commit that was developed in parallel
during the merge window:

8c8efa93db68 ("x86/bug: Add ARCH_WARN_ASM macro

Merge commit 'linus' into core/bugs, to resolve conflicts

Resolve conflicts with this commit that was developed in parallel
during the merge window:

8c8efa93db68 ("x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust")

Conflicts:
arch/riscv/include/asm/bug.h
arch/x86/include/asm/bug.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...


# 8b87f67b 08-Oct-2025 Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.18 merge window.


# 4b051897 21-Aug-2025 Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'v6.17-rc2' into HEAD

Sync up with mainline to bring in changes to include/linux/sprintf.h


# b4d90dbc 15-Sep-2025 Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to drm-misc-next-fixes to get features and fixes from
v6.17-rc6.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>


# 702fdf35 10-Sep-2025 Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-next

Catching up with some display dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>


# ca994e89 12-Aug-2025 Lucas De Marchi <lucas.demarchi@intel.com>

Merge drm/drm-next into drm-xe-next

Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.

Signed-off-by: Lucas De

Merge drm/drm-next into drm-xe-next

Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

show more ...


# 08c51f5b 11-Aug-2025 Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-n

Updating drm-misc-next to the state of v6.17-rc1. Begins a new release
cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>


# 8d2b0853 11-Aug-2025 Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.17-rc1. Begins a new release
cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>


# ab93e0dd 06-Aug-2025 Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge branch 'next' into for-linus

Prepare input updates for 6.17 merge window.


# a7bee4e7 04-Aug-2025 Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the mer

Merge tag 'ib-mfd-gpio-input-pwm-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.

show more ...


Revision tags: v6.16, v6.16-rc7, v6.16-rc6, v6.16-rc5, v6.16-rc4
# 74f1af95 29-Jun-2025 Rob Clark <robin.clark@oss.qualcomm.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss

Merge remote-tracking branch 'drm/drm-next' into msm-next

Back-merge drm-next to (indirectly) get arm-smmu updates for making
stall-on-fault more reliable.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...


Revision tags: v6.16-rc3, v6.16-rc2
# c598d5eb 11-Jun-2025 Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to forward to v6.16-rc1

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>


# 86e2d052 09-Jun-2025 Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.16

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>


12345678910>>...30